非圆齿轮齿面加工余量匀化工艺研究与实现

摘要/Abstract

摘要： 针对非圆齿轮加工中，由齿坯节曲线曲率变化所引起的分次进刀过程中齿面加工余量分布不均的问题，提出一种匀化非圆齿轮齿面加工余量的工艺方法。以非圆齿轮插削工艺为研究对象，基于插齿加工原理，对齿面加工余量分布不均的成因进行了分析；在此基础上建立了非圆齿轮匀化工艺插削联动模型，通过实时调整插刀与齿坯的几何位置关系，实现了非圆齿轮齿面加工余量的匀化；开发了非圆齿轮插齿CAM系统，利用CAM系统对齿面加工余量匀化工艺进行了仿真验证，仿真结果表明，所提工艺方法正确、可行；将匀化工艺集成到自主开发的齿轮加工数控系统中，进行了非圆齿轮插削加工试验，试验结果表明，所提工艺方法能够有效匀化齿面加工余量；对加工出的非圆齿轮齿面进行了三维形貌检测，检测结果表明，所提工艺方法能够显著提高非圆齿轮的加工精度与表面质量。

关键词: 非圆齿轮, 插齿加工, 加工余量, 匀化工艺, 三维形貌

Abstract: In order to solve the non-uniform tooth surface machining allowances of non-circular gears caused by the curvature variation of gear blank pitch curve in the multiple cutting cycles of non-circular gear machining， a tooth surface machining allowance uniform distribution processing technology for non-circular gears was proposed.Based on the principles of gear shaping， the shaping processes of non-circular gears were studied， and then the origins of the non-uniform tooth surface machining allowances of non-circular gears were analyzed.An uniform distribution processing technology shaping linkage model of non-circular gears was established， so that the tooth surface machining allowances might be distributed uniformly through the real-time adjustment of the geometric position relationship between the shaper and the gear blank.The non-circular gear shaping CAM system was developed， which was used to simulate the tooth surface machining allowance uniform distribution processing technology for non-circular gears， the simulation results show that the proposed processing technology is correct and feasible.The uniform distribution processing technology was integrated into the self-developed gear CNC system， and the actual shaping experiments of non-circular gears were conducted， the experimental results show that the proposed processing technology may uniformly distribute tooth surface machining allowances effectively.Finally， the 3D profile measurements of non-circular gear tooth surfaces were conducted， the measurement results show that the proposed processing technology may significantly improve the surface quality and machining accuracy of non-circular gears.

Key words: non-circular gear, gear shaping, machining allowance, uniform distribution processing technology, 3D topography

中图分类号:

TH164
TH132

韩江;高婷;李大柱;夏链. 非圆齿轮齿面加工余量匀化工艺研究与实现[J]. 中国机械工程.

HAN Jiang;GAO Ting;LI Dazhu;XIA Lian. Research and Implementation of Tooth Surface Machining Allowance Uniform Distribution Processing Technology of Non-circular Gears[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2018/V29/I09/1031

参考文献

[1]LITVIN F L，GONZALEZ-PEREZ I，FUENTES A，et al.Design and Investigation of Gear Drives with Non- circular Gears Applied for Speed Variation and Generation of Functions[J].Computer Methods in Applied Mechanics & Engineering，2008，197：3783-3802.
[2]田晓青.柔性电子齿轮箱设计及精度控制方法研究[D].合肥：合肥工业大学，2014.
TIAN Xiaoqing.Flexible Electronic Gearbox Design and Accuracy Control Method Study[D].Hefei:Hefei University of Technology，2014.
[3]ZHENG F，HUA L，HAN X，et al.Linkage Model and Manufacturing Process of Shaping Non-circular Gears[J].Mechanism & Machine Theory，2016，96：192-212.
[4]李波，何君，郑方焱，等.非圆内齿轮三轴联动插齿加工技术研究[J].中国机械工程，2016，27（11）:1455-1460.
LI Bo，HE Jun，ZHENG Fangyan，et al.Research on Three-axis Linkage Shaping Technology for Non-circular Internal Gears[J].China Mechanical Engineering，2016，27（11）：1455-1460.
[5]LIU Y.Study of Optimal Strategy and Linkage-model for External Non-circular Helical Gears Shaping[J].Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science， 2014，229（3）：493-504.
[6]李建刚，周磊，赵巍，等.在三轴插齿机上实现非圆齿轮磨齿运动的方法[J].哈尔滨工业大学学报， 2010，42（11）：1749-1752.
LI Jiangang，ZHOU Lei，ZHAO Wei，et al.Noncircular Gear Grinding Method Using Gear Generator with Form-grinding[J].Journal of Harbin Institute of Technology，2010，42（11）：1749-1752.
[7]吴序堂，王贵海.非圆齿轮及非匀速比传动[M].北京：机械工业出版社，1997.
WU Xutang，WANG Guihai.Non-circular Gear and Non-constant Speed Ratio Drive[M].Beijing:China Machine Press，1997.
[8]张莹，张定华，吴宝海.焊接式整体叶盘加工余量自适应优化方法[J].航空制造技术，2015（19）：30-33.
ZHANG Ying，ZHANG Dinghua，WU Baohai.An Adaptive Approach to Machining Allowance Balancing for Linear Friction Welding Blisk[J].Aeronautical Manufacturing Technology，2015（19）：30-33.
[9]LITVIN F L，GONZALEZ-PEREZ I，YUKISHIMA K，et al.Generation of Planar and Helical Elliptical Gears by Application of Rack-cutter， Hob， and Shaper[J].Computer Methods in Applied Mechanics & Engineering，2007，196（41）：4321-4336.
[10]LI D Z，XIA L，LIU Y Y，et al.Research on Non-circular Gear Hobbing Simulation Based on Piecewise Cubic Spline Fitting[J].Key Engineering Materials，2014，620：357-362.
[11]LIU Dawei，REN Tingzhi，JIN Xin.Geometrical Model and Tooth Analysis of Undulating Face Gear[J].Mechanism and Machine Theory，2015，86：140-155.
[12]TIAN X Q，HAN J，XIA L.Precision Control and Compensation of Helical Gear Hobbing via Electronic Gearbox Cross-coupling Controller[J].International Journal of Precision Engineering & Manufacturing， 2015，16（4）：797-805.
[13]JOLIVET S，MEZGHANI S，MANSORI M E，et al.Numerical Simulation of Tooth Surface Finish Effects on Gear Noise[C]//ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis.Copenhagen，Denmark，2014：1-5.

[1]	王建, 缪龙, 张文祥, 王树坤. 跳跃机器人能量转换的主动控制与试验测试[J]. 中国机械工程, 2022, 33(24): 2961-2970.
[2]	王兰青, 黄辉, 崔长彩. 线切蓝宝石晶片面形质量评价方法的试验研究[J]. 中国机械工程, 2022, 33(17): 2023-2028.
[3]	汪飞雪, 刘亚, 臧新良 . 非圆齿轮差动轮系往复机构反求设计与运动学分析[J]. 中国机械工程, 2021, 32(06): 697-704.
[4]	刘大伟1，2；刘佳佳1. 面向管道机器人的非对称惯性驱动系统及其动力学特性[J]. 中国机械工程, 2020, 31(18): 2189-2195，2205.
[5]	林超1;夏锡光1;邢庆坤2;刘文思1. 非圆齿轮型间歇转动机构的设计与运动特性分析[J]. 中国机械工程, 2020, 31(10): 1142-1148.
[6]	沈锦龙1;薛正堂2;衡传富2;刘小君1. 点接触弹流润滑条件下表面弹性变形研究[J]. 中国机械工程, 2019, 30(14): 1696-1702,1712.
[7]	张为;都晓锋;程超;李鹏飞. 球头铣刀加工曲面微单元理论建模与实验验证[J]. 中国机械工程, 2018, 29(13): 1553-1559.
[8]	叶军1,2;陈建能1,3;赵雄1,3;孙新城2;夏旭东1,3;高奇峰2. 一种新型类偏心圆非圆齿轮设计及其应用[J]. 中国机械工程, 2018, 29(05): 565-571,578.
[9]	陶德华1;王英1;陈建能2;荣权升1;周贤1;束学道1. 脉动血流发生器非圆齿轮-曲柄滑块式驱动机构设计与分析[J]. 中国机械工程, 2017, 28(16): 1914-1920,1927.
[10]	候丽霞, 刘小君, 张彤, 刘焜. 表面微凹坑和纹理方向对界面摩擦的耦合影响[J]. 中国机械工程, 2017, 28(11): 1279-1286.
[11]	胡紫阳, 杨辉, 李大柱, 韩江. 平流泵用非圆齿轮副的优化设计及实验分析[J]. 中国机械工程, 2016, 27(22): 3082-3087.
[12]	俞高红, 虞佳萍, 童俊华, 叶秉良, 郑士永, . 一种共轭凹凸型非圆齿轮机构的设计[J]. 中国机械工程, 2016, 27(16): 2155-2159,2165.
[13]	李波, 何君, 郑方焱, 陈定方, 吴俊峰, 吕小波, 吴又安. 非圆内齿轮三轴联动插齿加工技术研究[J]. 中国机械工程, 2016, 27(11): 1455-1460,1483.
[14]	刘大伟, 任廷志, 金昕. 空间非圆齿轮双侧同步驱动板坯结晶器非正弦振动的研究[J]. 中国机械工程, 2015, 26(17): 2325-2329.
[15]	李佳, 李晓群, 王鹏, 邹钰. 无理论刃形误差直齿插齿刀设计[J]. 中国机械工程, 2015, 26(12): 1563-1568.