[1]CHEN J, RANDALL R B, PEETERS B. Advanced Diagnostic System for Piston Slap Faults in IC Engines, Based on the Non-stationary Characteristics of the Vibration Signals[J]. Mechanical Systems & Signal Processing, 2016, 75:434-454.
[2]CHEN J, RANDALL R B. Intelligent Diagnosis of Bearing Knock Faults in Internal Combustion Engines Using Vibration Simulation[J]. Mechanism & Machine Theory, 2016, 104:161-176.
[3]吴虎胜,吕建新,吴庐山,等.基于EMD和SVM的柴油机气阀机构故障诊断[J].中国机械工程, 2010,21(22):2710-2714.
WU Husheng, LYU Jianxin, WU Lushan, et al. Fault Diagnosis for Diesel Valve Train Based on SVM and EMD[J]. China Mechanical Engineering, 2010,21(22):2710-2714.
[4]丁岩,邵毅敏.基于角域振动信号特征统计量的发动机故障分类方法[J]. 中国机械工程, 2014, 25(10):1374-1380.
DING Yan, SHAO Yimin. Engine Fault Classification Based on Characteristic Statistics of Vibration Signals in Angle Domain[J]. China Mechanical Engineering, 2014, 25(10):1374-1380.
[5]刘建敏,李晓磊,乔新勇,等.基于EMD和STFT柴油机缸盖振动信号时频分析[J]. 噪声与振动控制, 2013(2):133-137.
LIU Jianmin, LI Xiaolei, QIAO Xinyong, et al. Time-Frequency Analysis of Vibration Signal from Cylinder Head of a Diesel Engine Based on EMD and STFT[J]. Noise and Vibration Control, 2013(2):133-137.
[6]LIU X, RANDALL R B. Blind Source Separation of Internal Combustion Engine Piston Slap from Other Measured Vibration Signals[J]. Mechanical Systems & Signal Processing, 2005, 19(6):1196-1208.
[7]LIU X, RANDALL R B, ANTONI J. Blind Separation of Internal Combustion Engine Vibration Signals by a Deflation Method[J]. Mechanical Systems & Signal Processing, 2008, 22(5):1082-1091.
[8]康斌,向阳.独立分量分析在柴油机缸盖振动信号分离中的应用[J]. 武汉理工大学学报(交通科学与工程版), 2012, 36(4):753-756.
KANG Bin, XIANG Yang. Application of Independent Component Analysis to Decomposition of Engine Vibration Signal[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2012, 36(4):753-756.
[9]韩春杨, 姚国凤, 赵建,等.柴油机振动信号盲分离组合算法[J]. 振动与冲击, 2014, 33(6):44-47.
HAN Chunyang, YAO Guofeng, ZHAO Jian, et al. Combination Algorithm for Blind Separation of Diesel Engine Vibration Signal [J]. Journal of Vibration and Shock, 2014, 33(6):44-47.
[10]DU X, LI Z, BI F, et al. Source Separation of Diesel Engine Vibration Based on the Empirical Mode Decomposition and Independent Component Analysis[J]. Chinese Journal of Mechanical Engineering, 2012, 25(3):557-563.
[11]HUANG N E, SHEN Z, LONG S R, et al. The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-stationary Time Series Analysis[J]. Proceedings of the Royal Society: A Mathematical Physical & Engineering Sciences, 1998, 454:903-995.
[12]VOKELJ M, ZUPAN S, PREBIL I. EEMD-based Multiscale ICA Method for Slewing Bearing Fault Detection and Diagnosis [J]. Journal of Sound and Vibration, 2016, 370: 394-423.
[13]ZHANG M, JIANG Z, FENG K. Research on Variational Mode Decomposition in Rolling Bearings Fault Diagnosis of the Multistage Centrifugal Pump[J]. Mechanical Systems & Signal Processing, 2017, 93:460-493.
[14]DRAGOMIRETSKIY K, ZOSSO D. Variational Mode Decomposition[J]. IEEE Transactions on Signal Processing, 2014, 62(3):531-544.
[15]HYVARINEN A. Fast and Robust Fixed-point Algorithms for Independent Component Analysis[J]. IEEE Transactions on Neural Networks, 1999, 10(3):626-634.
[16]ZARZOSO V, COMON P. Robust Independent Component Analysis by Iterative Maximization of the Kurtosis Contrast with Algebraic Optimal Step Size [J]. IEEE Transactions on Neural Networks, 2010, 21(2):248-261.
[17]DYBAA J, ZIMROZ R. Rolling Bearing Diagnosing Method Based on Empirical Mode Decomposition of Machine Vibration Signal[J]. Applied Acoustics, 2014, 77(3):195-203.
[18]ANTONI J, DUCLEAUX N, NGHIEM G, et al. Separation of Combustion Noise in IC Engines under Cyclo-non-stationary Regime[J]. Mechanical Systems & Signal Processing, 2013, 38(1):223-236. |