高性能精密制造

摘要/Abstract

摘要： 高性能制造是高端装备和产品的关键零部件以性能精准保证为目标的几何和性能一体化制造，体现了由几何尺寸及公差要求为主的传统制造向高性能要求为主的先进制造的跃升。从制造的现状、需求和发展趋势出发，阐明了高性能零件的内涵、高性能制造的特点、面临的问题及其分类体系，并结合实例给予了深入分析和说明，为高端装备中一大批关键零部件的精密制造难题提供了可行的解决策略和途径。

关键词: 高性能制造, 难加工材料, 超高精度, 跨尺度, 表面层, 结构功能一体化

Abstract: High-performance manufacturing is the integrated manufacture of function and geometry, which aims at the precise guarantee of key parts of high-end equipment and products. It indicates the great progresses from the conventional manufacture with requirements of geometrical dimensioning and tolerancing to the advanced manufacture with primary requirements of high performance. From the points of view of the current status, requirements and development trend of manufacture，the features, facing challenges and its classification of high-performance manufacturing, as well as the connotations of high-performance parts, were analyzed and explained in depth combined with application examples. It provides a feasible route and solution strategy for the precise manufacture of a large number of key parts in high-end equipments.

Key words: high-performance manufacturing, difficult-to-cut material, ultra-high accuracy, cross-scale, surface layer, integration of structure and function

中图分类号:

TH161

郭东明. 高性能精密制造[J]. 中国机械工程.

GUO Dongming. High-performance Precision Manufacturing[J]. China Mechanical Engineering.

参考文献

[1]郭东明，孙玉文，贾振元. 高性能精密制造方法及其研究进展[J]. 机械工程学报，2014，50（11）：119-134.
GUO Dongming, SUN Yuwen, JIA Zhenyuan.Methods and Research Progress of High Performance Manufacturing[J]. Journal of Mechanical Engineering,2014，50（11）:119-134.
[2]DONG Huiyue, KE Yinglin. Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment[J]. Chinese Journal of Aeronautics,2006,19(3):247-254.
[3]LI Yingguang , LIU Changqing, HAO Xiaozhong, et al. Responsive Fixture Design Using Dynamic Product Inspection and Monitoring Technologies for the Precision Machining of Large-scale Aerospace Parts[J]. CIRP Annals, 2015, 64(1):173-176.
[4]LI Yingguang , LIU Xu, GAO James X, et al . A Dynamic Feature Information Model for Integrated Manufacturing Planning and Optimization[J]. CIRP Annals, 2012, 61(1):167-170.
[5]YANG Yiqing , LIU Qiang, ZHANG Bin. Design of a Passive Damper with Tunable Stiffness and Its Application in Thin-walled Part Milling[J]. International Journal of Advanced Manufacturing Technology, 2017, 89:2713-2720.
[6]GUO Dongming，REN Fei，SUN Yuwen．An Approach to Modeling Cutting Forces in Five-axis Ball-end Milling of Curved Geometries Based on Tool Motion Analysis[J]. Transactions of the ASME，Journal of Manufacturing Science and Engineering, 2010，132(4):041004-1-041004-8.
[7]SUN Yuwen, GUO Qiang．Analytical Modeling and Simulation of the Envelope Surface in Five-axis Flank Milling with Cutter Runout[J]．Transactions of the ASME，Journal of Manufacturing Science and Engineering，2012，134(2):021010-1-021010-11.
[8]SUN Yuwen, SUN Shuoxue, XU Jinting, et al. A Unified Method of Generating Tool Path Based on Multiple Vector Fields for CNC Machining of Compound NURBS Surfaces[J]. Computer-aided Design, 2017, 91:14-26.
[9]康仁科,马付建,董志刚,等.难加工材料超声辅助切削加工技术[J].航空制造技术, 2012(16):44-49.
KANG Renke, MA Fujian, DONG Zhigang, et al. Ultrasonic Assisted Machining of Difficult-to-Cut Material[J]. Aeronautical Manufacturing Technology，2012(16):44-49.
[10]张迅,董志刚,王毅丹,等.Nomex蜂窝芯直刃尖刀超声切割表面微观形貌特征[J].机械工程学报,2017,53(19):90-99.
ZHANG Xun, DONG Zhigang, WANG Yidan, et al.Charization of Surface Microscopic of Nomex Honeycomb after Ultrasonic Assisted Cutting[J]. Journal of Mechanical Engineering, 2017, 53(19):90-99.
[11]ZHANG Z Y, WANG B, KANG R K, et al. Changes in Surface Layer of Silicon Wafers from Diamond Scratching[J]. CIRP Annals—Manufacturing Technology, 2015, 64:349-352.
[12]ZHANG Z Y, GUO D M, WANG B, et al . A Novel Approach of High Speed Scratching on Silicon Wafers at Nanoscale Depths of Cut[J]. Scientific Reports, 2015, 5:16395.
[13]ZHANG Z Y, HUANG S L, WANG S C, et al . A Novel Approach of High-performance Grinding Using Developed Diamond Wheels[J]. International Journal of Advanced Manufacturing Technology, 2017, 91:3315-3326.
[14]ZHANG Z Y, CUI J F, WANG B, et al . A Novel Approach of Mechanical Chemical Grinding[J]. Journal of Alloys and Compounds,2017(726):514-524.
[15]DONG Z G, GAO S, ZHOU P, et al. Grinding Performance Evaluation of the Developed Chemo-mechanical Grinding (CMG) Tools for Sapphire Substrate[J]. Advanced Materials Research, 2012, 565:105-110.
[16]SHAN K, ZHOU P, ZUO Y S, et al. Analysis of the Polishing Ability of Electrogenerated Chemical Polishing[J].Precision Engineering,2016,47:122-130.
[17]CHEDRIK V ,ISHMURATOV F, ZICHENKOV M, et al. Optimization Approach to Design of Aeroelastic Dynamically-scaled Models of Aircraft[C]// 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Albany, New York,2004.
[18]CARLSSON M. Aeroelastic Model Design Using an Integrated Optimization Approach[J]. Journal of Aircraft,2004,41:1523-1529.
[19]YANG Rui, SUN Shiyong, QIAN Wei, et al. A Precise Manufacturing Method of the Composite Structure-similar Flutter Model[J]. Advances in Mechanical Engineering,2014,11:1-8.
[20]杨睿, 张强, 孙士勇,等. 机翼结构相似颤振模型制造的模态频率误差修正方法[J]. 机械工程学报, 2013, 49(8):57-64.
YANG Rui, ZHANG Qiang, SUN Shiyong, et al. Error-correction Method of the Modal Frequency for the Manufacturing of Wing Flutter Model with Structure-similarity[J]. Journal of Mechanical Engineering,2013,49(8):57-64.
[21]闫子彬, 杨睿, 孙士勇,等. 高性能风洞颤振模型的性能精确制造研究[J]. 机械工程学报,2016,52(9):72-78.
YAN Zibin, YANG Rui, SUN Shiyong, et al. Precise Manufacturing of Functional Parameters of Advancing Wind-tunnelflutter Model[J]. Journal of Mechanical Engineering,2016,52(9):72-78.
[22]LABHART T. Polarization-opponent Interneurons in the Insect Visual System[J]. Nature, 1988, 331(6155):435-437.
[23]褚金奎, 赵开春.仿昆虫复眼偏振敏感测角光电模型研究[J]. 微纳电子技术, 2005,42(12):541-545.
CHU Jinkui, ZHAO Kaichun.Study of Angle Measurement Optoelectronic Model on Emulating Polarization-sensitive Compound Eye of Insect[J]. Micronanoeletronic Technology,2005,42(12):541-545.
[24]CHU J K, ZHAO K C, ZHANG Q, et al. Construction and Performance Test of a Novel Polarization Sensor for Navigation[J]. Sensors and Actuators A, 2008, 148(1):75-82.
[25]CHU Jinkui, MENG Fantao, HAN Zhitao, et al . Large Area Mold Fabrication for Nanoimprint Lithography Using Electron Beam Lithography[J]. Science China: Technological Sciences, 2010, 53(1):248-252.
[26]CHU Jinkui, WANG Zhiwen, ZHANG Yingjie,et al. Integrated Blue Sensitive Polarization Dependent Photodetector[J]. Journal of Micro/Nanolithography, MEMS, and MOEMS,2013,12(3):033005.
[27]CHU Jinkui, ZHANG Yingjie, WANG Zhiwen, et al. Polarizing Color Filter Based on Subwavlength Metallic Grating with Grooves Carved in[J]. Optics Communications,2014,315:32-36.
[28]CHU Jinkui, WANG Zhiwen, GUAN Le, Integrated Polarization Dependent Photodetector and Its Application for Polarization Navigation[J]. IEEE Photonics Technology Letters,2014,26(5):469-472.
[29]WANG Y L, CHU J K, ZHANG R, et al. A Novel Autonomous Real-time Position Method Based on Polarized Light and Geomagnetic Field[J]. Science Report,2015,5:9725.
[30]雷明凯，郭东明. 高性能表面层制造：基于可控表面完整性的精密制造[J]. 机械工程学报,2016,52(17):187-196.
LEI Mingkai, GUO Dongming.High-performance Surface Layer Manufacturing: a Precision Processing Method Based on Controllable Surface Integrity[J]. Journal of Mechanical Engineering,2016,52(17):187-196.
[31]LEI M K, ZHU X P, GUO D M. Reducing Geometrical, Physical and Chemical Constraints in Surface Integrity of High Performance Stainless Steel Components by Surface Modification[J]. Journal of Manufacturing Science and Engineering—Transactions of the ASME,2016,138:044501-1-6.

[32]ZHU X P, DU P C, MENG Y, et al. Solution to Inverse Problem of Manufacturing by Surface Modification with Controllable Surface Integrity Correlated to Performance: a Case Study of Thermally Sprayed Coatings for Wear Performance[J]. Journal of Tribology—Transactions of the ASME,2017(138):061604.
[33]ZHU X P, ZHANG F G, LEI M K, et al . Material Loading in Inverse Surface Integrity Problem Solution of Cemented Carbide Component Manufacturing by Surface Modification[J]. Procedia CIRP, 2016 (45):235-238.
[34]ZHU X P, ZHANG F G , SONG T K , et al . Nonlinear Wear Response of WC-Ni Cemented Carbides Irradiated by High-intensity Pulsed Ion Beam[J]. Journal of Tribology—Transactions of the ASME,2014(136):011603.
[35]LEI M K, ZHU X P, LI Y P, et al . Significance of Surface Integrity on High Performance Manufacturing by Surface Modification[J]. The International Journal of Advanced Manufacturing Technology,2016(82):1831-1842.