[1]FLORES P. Dynamic Analysis of Mechanical Systems with Imperfect Kinematic Joints[D]. Braga, Portugal:Universidade Do Minho, 2004.
[2]白争锋. 考虑铰间间隙的机构动力学特性研究[D]. 哈尔滨:哈尔滨工业大学, 2011.
BAI Zhengfeng. Research on Dynamic Characteristics of Mechanism with Joint Elearance[D]. Harbin:Harbin Institute of Technology, 2011.
[3]赵宽, 陈建军, 曹鸿钧, 等. 含间隙曲柄滑块系统动力响应的随机性分析[J]. 振动与冲击, 2014, 33(11): 130-135.
ZHAO Kuan, CHEN Jianjun, CAO Hongjun, et al. Randomness Analysis of Dynamic Responses of a Slider-crank System with Clearances[J]. Journal of Vibration and Shock, 2014, 33(11): 130-135.
[4]李仕华, 冯伟波, 秦利,等. 不同重力环境下含间隙铰位置和碰撞力[J]. 机械工程学报, 2015, 51(17): 52-58.
LI Shihua, FENG Weibo, QIN Li, et al. Effect of Different Gravity Environment on the Position and Collision Force of Joint with Clearance[J]. Journal of Mechanical Engineering, 2015, 51(17): 52-58.
[5]时兵, 金烨. 面向虚拟样机的机构间隙旋转铰建模与动力学仿真[J]. 机械工程学报, 2009, 45(4): 299-303.
SHI Bing, JIN Ye. Dynamic Simulation and Modeling of Revolute Clearance Joint for Virtual Prototyping[J]. Journal of Mechanical Engineering, 2009, 45(4): 299-303.
[6]ZHANG X C, ZHANG X M, CHEN Z. Dynamic Analysis of a 3-RRR Parallel Mechanism with Multiple Clearance Joints[J]. Mechanism and Machine Theory, 2014, 78(8): 105-115.
[7]FLORES P, AMBROSIO J, CLARO J C P, et al. A Study on Dynamics of Mechanical Systems Including Joints with Clearance and Lubrication[J]. Mechanism and Machine Theory, 2006, 41(3): 247-261.
[8]VAREDI S M, DANIALI H M, DARDEL M, et al. Optimal Dynamic Design of a Planar Slider-crank Mechanism with a Joint Clearance[J]. Mechanism and Machine Theory, 2015, 86(1): 191-200.
[9]ZHANG Zhenhua, XU Liang, FLORES P, et al. A Kriging Model for Dynamics of Mechanical Systems with Revolute Joint Clearances[J]. Journal of Computational & Nonlinear Dynamics, 2014, 9(3): 310-319.
[10]OLYAEI A A, GHAZAVI M R. Stabilizing Slider-crank Mechanism with Clearance Joints[J]. Mechanism and Machine Theory, 2012, 53(3): 17-29.
[11]RAHMANIAN S, GHAZAVI M R. Bifurcation in Planar Slider-crank Mechanism with Revolute Clearance Joint[J]. Mechanism and Machine Theory, 2015, 91(4): 86-101.
[12]邓培生, 原大宁, 刘宏昭, 等. 考虑杆件柔性的间隙机构系统磨损分析[J]. 中国机械工程, 2016, 27(2): 143-149.
DENG Peisheng, YUAN Daning, LIU Hongzhao, et al. Wear Analysis on Intermittent Mechanism Systems Inclulding Flexible Bar[J]. China Mechanical Engineering, 2016, 27(2): 143-149.
[13]董富祥, 洪嘉振. 多体系统动力学碰撞问题研究综述[J]. 力学进展, 2009, 39(3): 352-359.
DONG Fuxiang, HONG Jiazhen. Review of Impact Problem for Dynamics of Multibody System[J]. Advances in Mechanics, 2009, 39(3): 352-359.
[14]BAI Zhengfeng, ZHAO Yang. A Hybrid Contact Force Model of Revolute Joint with Clearance for Planar Mechanical Systems[J]. International Journal of Non-linear Mechanics, 2013, 48(1): 15-36.
[15]王庚祥, 刘宏昭. 考虑球面副间隙的4-SPS/CU并联机构动力学分析[J]. 机械工程学报, 2014, 51(1): 43-51.
WANG Gengxiang, LIU Hongzhao. Dynamics Analysis of 4-SPS/CU Parallel Mechanism with Spherical Joint Clearance[J]. Journal of Mechanical Engineering, 2014, 51(1): 43-51.
[16]侯雨雷, 汪毅, 范建凯, 等. 3-PCSS/S球面并联肩关节机构优化与仿生设计[J]. 机械工程学报, 2015, 51(11): 16-23.
HOU Yulei, WANG Yi, FAN Jiankai, et al. Optimization and Bionic Design of 3-PCSS/S Spherical Parallel Mechanism for the Shoulder Joint[J]. Journal of Mechanical Engineering, 2015, 51(11): 16-23.
[17]HOU Y L, ZENG D X, ZHANG Z Y, et al. A Novel Two Degrees of Freedom Rotational Decoupled Parallel Mechanism[J]. Applied Mechanics & Materials, 2012, 215-216: 293-296.
[18]FLORES P, MACHADO M, SEABRA E, et al. A Parametric Study on the Baumgarte Stabilization Method for Forward Dynamics of Constrained Multibody Systems[J]. Journal of Computational and Nonlinear Dynamics, 2011, 6(1): 73-82.
[19]AMBRSIO J. Impact of Rigid and Flexible Multibody Systems: Deformation Description and Contact Models[J]. Virtual Nonlinear Multibody Systems, 2003, 103: 57-81.
[20]LIU C S, ZHANG K, YANG R. The Fem Analysis and Approximate Model for Cylindrical Joints with Clearances[J]. Mechanism and Machine Theory, 2007, 42(2): 183-197.
[21]ALVES J, PEIXINHO N, SILVA M T D, et al. A Comparative Study of the Viscoelastic Constitutive Models for Frictionless Contact Interfaces in Solids[J]. Mechanism and Machine Theory, 2015, 85(3): 172-188.
[22]MACHADO M, MOREIRA P, FLORES P, et al. Compliant Contact Force Models in Multibody Dynamics: Evolution of the Hertz Contact Theory[J]. Mechanism and Machine Theory, 2012, 53(3): 99-121.
[23]FLORES P, KOSHY C S, LANKARANI H M, et al. Numerical and Experimental Investigation on Multibody Systems with Revolute Clearance Joints[J]. Nonlinear Dynamics, 2011, 65(4): 383-398.
[24]侯雨雷, 张占叶, 胡鑫喆, 等. 新型两转动自由度完全解耦并联机构及其特性[J]. 哈尔滨工业大学学报, 2014, 46(9): 80-85.
HOU Yulei, ZHANG Zhanye, HU Xinzhe, et al. A Novel 2-DOF Fully Decoupled Rotational Parallel Mechanism and Its Characteristics[J]. Journal of Harbin Institute of Technology, 2014, 46(9): 80-85. |