连铸结晶器非正弦发生器的集成设计

中国机械工程

连铸结晶器非正弦发生器的集成设计

刘大伟1,2;罗林明2;王国会2;金昕2

1.燕山大学机械工程学院，秦皇岛，066004
2.燕山大学国家冷轧板带装备及工艺工程技术研究中心，秦皇岛，066004

出版日期:2017-11-10 发布日期:2017-11-07
基金资助:
河北省自然科学基金资助项目(E2016203183，E2016203339)
Hebei Provincial Natural Science Foundation of China （No. E2016203183，E2016203339）

Integrated Design of Non-sinusoidal Generator of Continuous Casting Mold

LIU Dawei1,2;LUO Linming2;WANG Guohui2;JIN Xin2

1.College of Mechanical Engineering, Yanshan University, Qinhuangdao ,Hebei, 066004
2.National Engineering Technology Research Center of Cold Rolling Strip Equipment and Technology,Yanshan University, Qinghuagndao,Hebei,066004

Online:2017-11-10 Published:2017-11-07
Supported by:
Hebei Provincial Natural Science Foundation of China （No. E2016203183，E2016203339）

摘要/Abstract

摘要： 在分析非正弦振动系统原理的基础上，提出了用减变速一体化齿轮代替原有二级发生器激发结晶器非正弦振动的方法；针对典型的具有匀速运动特征的非正弦波形，反求出减变速一体化齿轮的节曲线方程，进而推导出关键工艺参数的计算公式；结合某钢厂的生产要求，给出集成发生器的设计实例及工艺分析。非圆齿轮传动系统的集成设计不仅能达到良好的工艺效果，而且能很大程度地实现设备高效轻量化，具有应用和推广价值。

关键词: 结晶器, 非正弦振动, 减变速一体化齿轮, 节曲线逆向构建

Abstract: On the analyses of non-sinusoidal oscillator principles, a method was presented, where the mold was driven by a pair of speed integration gear instead of the two stage generator. According to the typical non-sinusoidal wave with constant speed, the inverse solution for the pitch curve equations of the speed integration gear was given, with the key technological parameters deduced. On the basis of steel mill production requirements, a design example of the integration generator and technology analysis were made. The integration design of the noncircular gear transmission system attains good processing results, and achieves high efficiency and light weight, which is of practical and popularization values.

Key words: mold, non-sinusoidal oscillation, speed integration gear, inverse solution for pitch curve

中图分类号:

TH132

刘大伟1,2;罗林明2;王国会2;金昕2. 连铸结晶器非正弦发生器的集成设计[J]. 中国机械工程.

LIU Dawei1,2;LUO Linming2;WANG Guohui2;JIN Xin2. Integrated Design of Non-sinusoidal Generator of Continuous Casting Mold[J]. China Mechanical Engineering.

参考文献

[1]周超，任素波，张兴中. 新型结晶器基本参数研究及其内钢液行为仿真[J]. 中国机械工程，2016，27(11)：1541-1545.
ZHOU Chao，REN Subo，ZHANG Xingzhong. Basic Parameters in a New Bloom Crystallizer and Simulation on Its Inner Liquid Steel Behavior[J]. China Mechanical Engineering，2016，27(11)：1541-1545.

[2]殷瑞钰. 新世纪以来中国炼钢-连铸的进步及命题[J]. 中国冶金，2014，24(8)：1-9.
YIN Ruiyu. Progress and Propositions of Chinese Steelmaking and Continuous Casting Since the New Century[J]. China Metallurgy，2014，24(8)：1-9.

[3]梁子福，何博，张继强，等. 一种小方坯或小圆坯连铸机结晶器液压振动系统：中国，CN201410031089.8[P]. 2014-04-30.
LIANG Zifu，HE Bo，ZHANG Jiqiang，et al. A Crystalline or Small Round Billet Continuous Casting Machine for Hydraulic Vibration System：China，CN201410031089.8 [P]. 2014-04-30.

[4]方涛，向忠辉，李宏磊. 连铸机结晶器液压振动常见故障分析与对策[J]. 机床与液压，2014，42(10)：147.
FANG Tao，XIANG Zhonghui，LI Honglei. Failure Analysis and Countermeasures of Hydraulic Oscillation of Continuous Casting Mold[J]. Machine Tool and Hydraulics，2014，42(10)：147.

[5]方一鸣，李宫胤，李建雄，等. 伺服电机驱动连铸结晶器振动系统建模与分析[J]. 仪器仪表学报，2014，35(11)：2616-2623.
FANG Yiming，LI Gongyin，LI Jianxiong，et al. Modeling and Analysis for Oscillation System of Continuous Casting Mold Driven by Servo Motor[J]. Chinese Journal of Scientific Instrument，2014，35(11):2616-2623.

[6]田志恒，田立，周永辉，等. 结晶器非正弦振动系统的开发与应用[J]. 钢铁，2004，39(增)：623-629.
TIAN Zhiheng，TIAN Li，ZHOU Yonghui，et al. Development and Application of Non-sinusoidal Oscillation System[J]. Iron and Steel，2004，39(S)：623-629.

[7]YAO Yunfeng，LI Xiankui，FANG Yiming，et al. Study of Non-sinusoidal Oscillation of Continuous Casting Mold Driven by Servomotor[J]. Journal of Iron and Steel Research International，2008，15(1):558-562.

[8]刘大伟，任廷志. 非圆齿轮驱动结晶器非正弦振动的研究[J]. 中国机械工程，2013，24(3):327-330.
LIU Dawei，REN Tingzhi. Research on Non-sinusoidal Oscillation of Mold Driven by Noncircular Gears[J]. China Mechanical Engineering，2013，24(3):327-330.

[9]刘大伟，任廷志，金昕. 空间非圆齿轮双侧同步驱动板坯结晶器非正弦振动的研究[J]. 中国机械工程，2015，26(17)：2325-2329.
LIU Dawei，REN Tingzhi，JIN Xin. Research on Non-sinusoidal Oscillation of Slab Mold Driven by Two Spatial Noncircular Gear Sets Synchronously[J]. China Mechanical Engineering，2015，26(17)：2325-2329.

[10]ZHANG Xingzhong，ZHENG Xueran，LIU Qingguo，et al. Investigation and Application of Non-sinusoidal Oscillation Technique of Mold[J]. Journal of Iron and Steel Research International，2013，20(3)：327-330.

[11]刘大伟，任廷志，金昕. 减变速一体化齿轮啮合原理的研究[J]. 机械工程学报，2016，52(15)：1-7.
LIU Dawei，REN Tingzhi，JIN Xin.Meshing Theory of Speed Integration Gear[J].Journal of Mechanical Engineering，2016，52(15)：1-7.