[1]THAKUR A, GANGOPADHYAY S. State-of-the-art in Surface Integrity in Machining of Nickel-based Super Alloys[J]. International Journal of Machine Tools and Manufacture, 2016,100: 25-54.
[2]KLOCKE F, ZEIS M, KLINK A, et al. Technological and Economical Comparison of Roughing Strategies via Milling, EDM and ECM for Titanium and Nickel-based Blisks[J]. CIRP Journal of Manufacturing Science and Technology, 2013,6(3):198-203.
[3]KLOCKE F, ZEIS M, KLINK A, et al. Experimental Research on the Electrochemical Machining of Modern Titanium & Nickel Based Alloys for Aero Engine Components[J]. Procedia CIRP, 2013,6:368-372.
[4]LIX, MA S, MENG F J. Surface Integrity of GH4169 Affected by Cantilever Finish Grinding and the Application in Aero-engine Blades[J]. Chinese Journal of Aeronautics, 2015,28(5): 1539-1545.
[5]SIENIAWSKI J, NADOLNY K. The Effect upon Grinding Fluid Demand and Workpiece Quality When an Innovative Zonal Centrifugal Provision Method Is Implemented in the Surface Grinding of Steel CrV12[J]. Journal of Cleaner Production, 2016,113:960-972.
[6]LIX. Application of Self-inhaling Internal Cooling Wheel in Vertical Surface Grinding[J]. Chinese Journal of Mechanical Engineering, 2014,27(1):86-91.
[7]MANIMARAN G, KUMAR M P, VENKATASAMY R. Influence of Cryogenic Cooling on Surface Grinding of Stainless Steel 316[J]. Cryogenics, 2014,59:76-83.
[8]REDDY P P, GOSH A. Effect of Cryogenic Cooling on Spindle Power and G-ratio in Grinding of Hardened Bearing Steel[J]. Procedia Materials Science,2014,5:2622-2628.
[9]HADADM J, TAWAKOLI T, SADEGHI M H, et al. Temperature and Energy Partition in Minimum Quantity Lubrication MQL Grinding Process[J]. International Journal of Machine Tools and Manufacture, 2012, 54/55:10-17.
[10]HADAD M, SADEGHI B. Thermal Analysis of Minimum Quantity Lubrication MQL Grinding Process[J]. International Journal of Machine Tools and Manufacture,2012,63:1-15.
[11]MARUDA R, LEGUTKO S, KROLCZYK G. Effect of Minimum Quantity Cooling Lubrication (MQCL) on Chip Morphology and Surface Roughness in Turning Low Carbon Steels[J]. Application of Mechanical Materials, 2014, 657:38-42.
[12]ZHANG S, LI J F, WANG Y W. Tool Life and Cutting Forces in End Milling Inconel 718 under Dry and Minimum Quantity Cooling Lubrication Cutting Conditions[J]. Journal of Cleaner Production,2012,32:81-87.
[13]NADOLNY K, SIENICK W, WOJTEWICZ M. The Effect upon the Grinding Wheel Active Surface Condition When Impregnating with Non-metallic Elements during Internal Cylindrical Grinding of Titanium[J]. Archives of Civil and Mechanical Engineering,2015, 15(1):71-86.
[14]赫青山,傅玉灿,徐鸿钧,等.TC4钛合金高效磨削加工用环形热管砂轮的研制[J].航空学报,2013,34(7): 1740-1747.
HE Qingshan, FU Yucan, XU Hongjun, et al. Development of Annular Heat Pipe Grinding Wheel for High Efficiency Machining of TC4 Titanium Alloy[J]. Chinese Journal of Aeronautics,2013,34(7):1740-1747.
[15]LEEP H, SANG W L. Experimental Characterization of Micro-grinding Process Using Compressed Chilly Air[J]. International Journal of Machine Tools and Manufacture, 2011,51(3):201-209.
[16]SIENIAWSKI J, NADOLNY K. The Effect upon Grinding Fluid Demand and Workpiece Quality When an Innovative Zonal Centrifugal Provision Method Is Implemented in the Surface Grinding of Steel CrV12[J]. Journal of Cleaner Production, 2016,113:960-972.
[17]CEARSOLO X, CABANES I, SANCHEZ J A, et al. Dry-dressing for Ecological Grinding[J]. Journal of Cleaner Production,2016,135:633-643.
[18]SABERI A, RAHIMI A, PARSA H, et al. Improvement of Surface Grinding Process Performance of CK45 Soft Steel by Minimum Quantity Lubrication(MQL) Technique Using Compressed Cold Air Jet from Vortex Tube[J].Journal of Cleaner Production, 2016,131:728-738.
[19]AURICHJ C, KIRSCH B, HERZENSTIEL P, et al. Hydraulic Design of a Grinding Wheel with an Internal Cooling Lubricant Supply[J]. Production Engineering,2011,5: 119-126.
[20]NADOLNY K. Small-dimensional Sandwich Grinding Wheels with a Centrifugal Coolant Provision System for Traverse Internal Cylindrical Grinding of Steel 100Cr6[J]. Journal of Cleaner Production,2015, 93:354-363.
[21]彭锐涛,唐恒,唐新姿,等.一种内冷却磨削砂轮:中国, ZL201410197728.8[P]. 2014-05-07.
PENG Ruitao, TANG Heng, TANG Xinzi, et al. An Internal Cooling Grinding Wheel: China, CN201410197728.8[P]. 2014-05-07.
[22]AURICHJ C, BRAUN O, WAMECKE G, et al. Development of a Super Abrasive Grinding Wheel with Defined Grain Structure Using Kinematic Simulation[J]. CIRP Annals Manufacturing Technology, 2003, 52(1):275-280. |