基于模型定义的产品信息移动Web轻量化实现

摘要/Abstract

摘要： 针对STEP AP242提出了多视图语义模型，在此基础上进行语义本体化实现对产品几何与非几何语义信息的统一；然后提出了一种基于边界特征的轻量化算法，该算法在保留产品非几何信息的前提下，裁剪产品模型，简化三角面片，降低数据复杂度；最后给出了实验数据分析以证明该算法的可行性。

关键词: 移动Web, STEP, 语义模型, 轻量化

Abstract: Based on the STEP AP242 protocol, which supported product model definition exchanges, a multi-view semantic model was proposed to classify and keep the non-geometric informations. With the model, semantic ontology was implemented to unify the product geometry and non-geometric semantic informations. Then a boundary-based lightening algorithm was proposed to match the performance of mobile terminals, which might cut product model with the product non-geometric information kept. Finally the experimental data was given to prove the feasibility.

Key words: mobile Web, STEP, semantic model, lightening

中图分类号:

TP393

简琤峰;孙畅. 基于模型定义的产品信息移动Web轻量化实现[J]. 中国机械工程.

JIAN Chengfeng;SUN Chang. Lightening Technological Implementation of Model-based Definition Product Information on Mobile Web[J]. China Mechanical Engineering.

参考文献

[1]王英, 陈建能, 赵雄, 等. 基于NURBS曲线的凸轮廓线表达方法的研究及应用[J]. 中国机械工程, 2013,24（10）：1375-1380.
WANG Ying, CHEN Jianneng, ZHAO Xiong, et al.Study and Application of Cam Profile Representation Method Based on NURBS Curve [J]. China Mechanical Engineering, 2013,24(10): 1375-1380.
[2]TAUBIN G, ROSSIGNAC J. Geometric Compression through Topological Surgery [J]. ACM Transactions on Graphics, 1997, 17(2): 84-115.
[3]TOUMA C, GOTSMAN C. Triangle Mesh Compression [C]//Eeding of Graphics Interface. Berlin, 1998:26-34.
[4]KALVINA D, TAYLOR R H. Superfaces: Polygonal Mesh Simplification with Bounded Error [J]. Computer Graphics & Applications IEEE, 1996, 16(3): 64-77.
[5]SEO J, SONG Y, KIM S, et al. Wrap-around Operation for Multi-resolution CAD Model [J]. Computer-Aided Design and Applications, 2005, 2(1): 67-76.
[6]LEE S H. Feature-based Multi Resolution Modeling of Solids [J]. ACM Transactions on Graphics, 2005, 24(4): 1417-1441.
[7]张霞, 段黎明, 刘璐. 保持特征的高质量三角网格简化方法[J]. 计算机集成制造系统, 2014, 20(3):486-493.
ZHANG Xia, DUAN Liming, LIU Lu. High Quality Triangular Mesh Simplification Method for Retaining Feature[J] .Computer Integrated Manufacturing System, 2014, 20 (3): 486-493.
[8]张霞，段黎明，薛涛, 基于数据重建的三角网格模型简化优化方法[J]. 强激光与粒子束, 2014, 26(5):308-312.
ZHANG Xia, DUAN Liming, XUE Tao, Simplified Optimization Method for Triangular Mesh Model Based on Data Reconstruction[J]. High Power Laser and Particle Beams, 2014, 26 (5): 308-312.
[9]OVREIU E, SULTANA A, RIVEROS J G, et al. Triangular Mesh Simplification Using an Adaptive Subdivision[C]// IEEE Signals, Circuits and Systems International Symposium. Beijing, 2013: 1-4.
[10]郭雅丽. 超轻量化3D数据应用——解读XVL技术[J]. CAD/CAM与制造业信息化, 2008(8): 50-51.
GUO Yali. Ultra Lightweight 3D Data Application—Interpreting XVL Technology [J]. Digital Manufacturing Industry, 2008 (8): 50-51.
[11]冯勇, 王明玉. 基于语义的轻量级数据集成方法[J]. 计算机工程与设计, 2012, 33(1): 402-406.
FENG Yong, WANG Mingyu.Technology of Lightweight Data Integration Based on Semantics[J]. Computer Engineering and Design, 2012, 33 (1): 402-406.
[12]闻晓, 谷青范. 产品数据轻量化访问技术研究与实现[J]. 电子科技, 2013, 26(2): 159-161.
WEN Xiao,GU Qingfan.Study and Implementation of Lightweight Access Technology for Product Data [J]. Electronic Science and Technology, 2013, 26 (2): 159-161.
[13]刘清华,李帅,刘云华,万立. 协同环境中基于轻量化的3D异构CAD模型干涉检查[J]. 中国机械工程,2013,24(1):56-60.
LIU Qinghua, LI Shuai, LIU Yunhua, et al. Interference Checking of 3D Heterogeneous CAD Model Based on Lightweight in Collaborative Environment [J]. China Mechanical Engineering, 2013,24(1): 56-60.
[14]International Organization for Standardization. ISO 10303-242:2014 Industrial Automation Systems and Integration, Product Data Representation and Exchange, AP 242: Managed Model Based 3D Engineering [S]. Switzerland: ISO Copyright Office, 2014.
[15]陈思, 阎艳, 王钊, 等. 产品设计知识服务中本体推理技术应用[J]. 中国机械工程, 2014, 25(19): 2620-2627.
CHEN Si, YAN Yan, WANG Zhao, et al. Application of Ontology Reasoning Technology in Product Design Knowledge Service[J]. China Mechanical Engineering, 2014, 25 (19): 2620-2627.
[16]朱海华, 朱柏青, 李东波. 基于本体的产品服务知识表示方法研究[J]. 中国机械工程, 2013, 24(18): 2484-2489.
ZHU Haihua, ZHU Baiqing, LI Dongbo. Study on Knowledge Representation of Product Service Based on Ontology[J]. China Mechanical Engineering, 2013, 24 (18): 2484-2489.
[17]胡建，廖文和，徐勇，等.基于本体的概念设计知识管理系统框架研究[J]. 中国机械工程，2006，17（2）：172-176.
HU Jian, LIAO Wenhe, XU Yong, et al. Study on Framework of Conceptual Design Knowledge Management System Based on Ontology[J].China Mechanical Engineering, 2006,17 (2): 172-176.
[18]ABDUL-GHAFOUR S, GHODOUS P, SHARIAT B, et al. Semantic Interoperability of Knowledge in Feature-based CAD Models[J]. Computer-Aided Design, 2014, 56: 45-57.
[19]简琤峰.语义网格环境下虚拟组织异构产品信息的语义在线重组技术[J].中国机械工程,2011,22(1):54-59.
JIAN Chengfeng. Heterogeneous Product Information Semantic Online Reconstruction under the Virtual Organization Semantic Grid Environment[J]. China Mechanical Engineering, 2011,22(1):54-59.
[20]LIPMAN R, LUBELL J. Conformance Checking of PMI Representation in CAD Model STEP Data Exchange Files[J]. Computer-Aided Design, 2015, 66: 14-23.