热连轧机工作辊水平-垂直非线性振动特性及抑制

摘要/Abstract

摘要： 基于振动情况下轧制界面水平-垂直方向摩擦力模型和动态轧制力模型，考虑轧机的结构和工作辊轴承座与牌坊立柱间的摩擦力等因素的影响，建立了热连轧机工作辊水平-垂直系统的非线性振动模型。运用平均法求解得到幅频特性方程，分析外扰力和非线性参数等因素对系统幅频特性的影响，为抑制轧机工作辊水平-垂直振动提供理论指导。通过分析李雅普诺夫指数和位移分岔图，发现系统随外扰力幅值变化表现出周期、倍周期和混沌等不同运动状态。最后，通过分析工作辊轴承座与牌坊立柱间有无衬板间隙这两种情况下的幅频特性及衬板间隙对系统振动的影响规律，提出一种抑制工作辊水平振动和垂直振动的方法，仿真和实验结果均表明该方法有效。

关键词: 热连轧机, 变摩擦力, 非线性振动特性, 振动抑制

Abstract: Work roll vertical-horizontal system's nonlinear vibration model of a hot strip tandem mill was established based on the rolling interface horizontal-vertical direction friction mechanics model and the dynamic rolling force model, with the influences of mill structures and the frictions between work roll bearing seats and memorial arch pillars considered. The amplitude-frequency characteristics equation of the system was obtained by using average method, and the characteristics of amplitude-frequency were analyzed under the effects of the factors such as the extraneous forces and nonlinear parameters, which provided theoretical guidance for the suppression of work roll system vertical-horizontal vibrations. Different vibration states such as periods, doubling periods, chaos were exhibited along with the extraneous force amplitude changes when analyzing the system Lyapunov index and displacement bifurcation diagram. Finally, a method of inhibition of horizontal vibrations and vertical vibrations was presented based on the influences of scaleboard gaps on system vibrations and the analyses of amplitude-frequency characteristics under circumstances whether there were scaleboard gap or not between work roll bearing block and arch column. The results of simulation and practice show the effectiveness of the method.

Key words: hot strip tandem mill, variable friction, nonlinear vibration characteristics, vibration suppression

中图分类号:

TH113.1

凌启辉;赵前程;王宪;康煜华. 热连轧机工作辊水平-垂直非线性振动特性及抑制[J]. 中国机械工程.

LING Qihui;ZHAO Qiancheng;WANG Xian;KANG Yuhua. Work Roll Horizontal-Vertical Nonlinear Vibration Characteristics and Suppression of Hot Strip Tandem Mills[J]. China Mechanical Engineering.

参考文献

[1]PENG K X，ZHANG　K，DONG　J，et al.A New Data-driven Process Monitoring Scheme for Key Performance Indictors with Application to Hot Strip Mill Process [J].Journal of Franklin Institute，2014，351(9)：4555-4569.
[2]SKRIPALENKO M M，ASHIKHMIN D A，SKPIPALENKO M N，et al.Use of the Software Deforms 2D to Model the Process of Rolling with Vibration of the Top Work Roll [J].Metallurgist， 2013，56(11)：844-847.
[3]HEIDARI A，FOROUZAN M R.Optimization of Cold Rolling Process Parameters in Order to Increasing Rolling Speed Limited by Chatter Vibrations [J].Journal of Advanced Research，2013，4(1)：27-34.
[4]范小彬，臧勇，王会刚.热连轧机垂直振动特性研究 [J].中国机械工程，2010，21(15)：1801-1804.
FAN Xiaobin，ZANG Yong，WANG Huigang.Research on Vertical Vibration of Hot Rolling Mill[J].China Mechanical Engineering，2010，21(15)：1801-1804.
[5]YUN I S，WILSON W R D，EHMAN K F，et al.Review of Chatter Studies in Cold Rolling [J].International Journal of Machine Tool & Manufacture，1998，38(1)：1449-1530.
[6]EUGENIO B，LUCA L.Numerical and Experimental Analysis of the Dynamic Effects in Compact Cluster Mills for Cold Rolling[J].Journal of Materials Processing Technology，2009，209(5)：2436-2445.
[7]KAPIL S，EBERHARD P，DWIVEDY S K，et al.Nonlinear Dynamic Analysis of a Parametrically Excited Cold Rolling Mill [J].Journal of Manufacturing Science & Engineering，2014，136(4)：10-19.
[8]闫晓强，吴先峰，杨喜恩，等.热连轧机扭振和轴向振动耦合研究 [J].工程力学，2014，31(2)：214-218.
YAN Xiaoqiang，WU Xianfeng，YANG Xien，et al.Coupling Research on Torsional Vibration and Axial Vibration of Hot Strip Rolling Mill [J].Journal of Mechanical Engineering，2014，31(2)：214-218.
[9]闫晓强，包淼，李永奎，等.热连轧 FTSR 轧机振动研究 [J].工程力学，2012，29(2)：230-234.
YAN Xiaoqiang，BAO Miao，LI Yongkui，et al.Research on the Vibration of FTSR Hot Rolling Mill [J].Journal of Mechanical Engineering，2012，29(2)：230-234.
[10]闫晓强.热连轧机机电液耦合振动控制 [J].机械工程学报，2011，47(17)：61-65.
YAN Xiaoqiang. Machinery-Electric-Hydraulic Coupling Vibration Control of Hot Continuous Rolling Mills [J].Journal of Mechanical Engineering，2011，47(17)：61-65.
[11]ROBERTS W L.Fourth Mill Stand Chatter of the Fifth-octave Mode [J].Iron and Steel Engineer，1978，55(10)：206-216.
[12]刘浩然，侯东晓，时培明，等.轧机辊系滞后非线性垂直振动系统的振动特性 [J].机械工程学报，2011，47(13)：65-71.
LIU Haoran，HOU Dongxiao，SHI Peiming，et al.Vibration Characteristics of Hysteretic Nonlinear Vertical Vibration System of Rolling Mill Roller [J].Journal of Mechanical Engineering，2011，47(13)：65-71.
[13]曾令强，臧勇，郜志英，等.轧机整体耦合建模问题研究 [J].机械工程学报，2015，55(14)：46-53.
ZENG Lingqiang，ZANG Yong，GAO Zhiying，et al. Study on Overall Coupled Modeling of the Rolling Mill [J].Journal of Mechanical Engineering，2015，55(14)：46-53.
[14]凌启辉，闫晓强，张清东，等.双动力源驱动下的热连轧机振动特征 [J].振动、测试与诊断，2014，34(3)：534-537.
LING Qihui，YAN Xiaoqiang，ZHANG Qingdong，et al.Research on Double Power Coupled Vibration Characteristics of Hot Rolling Mill[J].Journal of Vibration，Measurement & Diagnosis，2014，34(3)：534-537.
[15]凌启辉.现代热连轧机液机耦合振动研究 [D].北京：北京科技大学，2014.
LING Qihui.Mechanical-Hydraulic Coupling Vibration of Modern Hot Continuous Rolling Mill [D].Beijing：University of Science and Technology Beijing，2014.