[1]洪玫, 姚立纲.超环面行星蜗杆传动系统研究进展与展望[J].机械传动,2013,37(6):129-132.
HONG Mei, YAO Ligang. Study Current State and Prospect of the Toroidal Planet Worm Drive System[J]. Mechanical Transmission,2013,37(6):129-132.
[2]DING X M, FUH J, LEE K S. Interference Detection for 3-axis Mold Machining[J].Computer-aided Design, 2001,33(8):561-569.
[3]李艳霞, 李科艳.基于数控仿真的刀具干涉验证算法研究[J].制造技术与机床,2010(8):28-31.
LI Yanxia, LI Keyan. Research on Tool Interference Verification Algorithm Based on NC Simulation[J]. Manufacturing Technology & Machine Tool,2010(8):28-31.
[4]DING S, MANNAN M A, POO A N.Oriented Bounding Box and Octree Based Global Interference Detection in 5-axis Machining of Free-form Surfaces[J]. Computer-aided Design,2004,36(13):1281-1294.
[5]曾志迎, 贾育秦, 袁金鹏, 等. 复杂曲面的五轴加工无干涉刀具路径生成技术研究[J]. 组合机床与自动化加工技术,2012(10):5-9.
ZENG Zhiying, JIA Yuqin, YUAN Jinpeng, et al. Research on Gauging-free Cutter Path Generation Technology of Complex Surfaces[J]. Modular Machine Tool & Automatic Manufacturing Technique,2012(10):5-9.
[6]李万军,赵东标,牛敏,等.五轴加工全局干涉检查及其避免[J].计算机集成制造系统,2011,17(5):1011-1015.
LI Wanjun, ZHAO Dongbiao, NIU Min, et al. Global Tool Interference Check and Avoidance in Five-axis Numerical Control Machining[J]. Computer Integrated Manufacturing Systems,2011,17(5):1011-1015.
[7]杜娟, 闫献国, 田锡天. 复杂曲面五轴加工局部干涉处理技术研究[J].图学学报,2012,33(1):113-120.
DU Juan, YAN Xianguo, TIAN Xitian. Local Interference Detection and Avoidance in Five-axis Machining of Complex Surfaces[J]. Journal of Graphics,2012,33(1):113-120.
[8]王国勋, 舒启林, 王军, 等. 复杂曲面五轴加工干涉检查的研究[J].中国机械工程,2014,25(3):299-303.
WANG Guoxun, SHU Qilin, WANG Jun, et al. Tool Interference Checking for Five Axis NC Machining of Sculptured Surfaces[J]. China Mechanical Engineering,2014,25(3):299-303.
[9]CAN A, UNUVAR A. A Novel Iso-scallop Tool-path Generation for Efficient Five-axis Machining of Free-form Surfaces[J]. International Journal of Advanced Manufacturing Technology,2010,51(9/12):1083-1098.
[10]MAKHANOV S S. Adaptable Geometric Patterns for Five-axis Machining: a Survey[J]. International Journal of Advanced Manufacturing Technology,2010,47(9/12):1167-1208.
[11]JUN C S, CHA K, LEE Y S. Optimizing Tool Orientations for 5-axis Machining by Configuration-space Search Method[J]. Computer-aided Design,2003,35(6):549-566.
[12]RAO A, SARMA R. On Local Gouging in Five-axis Sculptured Surface Machining Using Flat-end Tools[J]. Computer-aided Design,2000,32(7):409-420.
[13]洪玫, 姚立纲. 基于数值方法的内超环面齿轮齿廓离散建模[J].图学学报,2013,34(4):88-93.
HONG Mei, YAO Ligang.Discrete Modeling of the Tooth Profile of the Stationary Internal Toroidal Based on Numerical Method[J]. Journal of Graphics,2013,34(4):88-93.
[14]洪玫.超环面行星蜗杆传动齿廓几何建模与基于误差和弹性变形的啮合特性分析[D].福州:福州大学,2014.
HONG Mei. Tooth Profile Geometry Modeling and Meshing Characterictic Analysis Based on the Errors and Elastic Deformation for the Toroidal Drive[D]. Fuzhou: Fuzhou University,2014. |