适用于多种材料阵列微槽加工的聚晶金刚石铣槽刀制备

中国机械工程

适用于多种材料阵列微槽加工的聚晶金刚石铣槽刀制备

杨吟飞;钟蠡;李亮;郝秀清;何宁

南京航空航天大学机电学院，南京，210016

出版日期:2017-06-10 发布日期:2017-06-13
基金资助:
国家自然科学基金资助项目（51575268，51405226）

Fabrication of PCD Slotting Tools Applied to Machine Micro Slot Arrays of Multiple Materials

YANG Yinfei;ZHONG Li;LI Liang;HAO Xiuqing;HE Ning

College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics, Nanjing,210016

Online:2017-06-10 Published:2017-06-13

摘要/Abstract

摘要： 结合金刚石飞切刀具和锯片，设计了具有特定形状、尺寸和角度参数的铣槽刀，并采用电火花线切割加工方法制造出了PCD铣槽刀；利用自制PCD铣槽刀进行微细铣削试验，制备出了加工质量良好的典型阵列微槽结构。

关键词: 微细铣削, 多种材料, 阵列微槽, 聚晶金刚石铣槽刀

Abstract: Firstly, slotting tools characterized by specific geometry, sizes and angles were designed from the combination of flying cutting tools and sawing blades. Secondly, the ultra-hard PCD slotting tools were manufactured by wire cut electrical discharge machining. At last, micro slot milling experiments were performed, and typical micro slot arrays were machined by employing the self-fabricated PCD slotting tools.

Key words: micro milling, multiple material, micro slot array, polycrystalline diamond(PCD) slotting tool

中图分类号:

TG5
TH16

杨吟飞, 钟蠡, 李亮, 郝秀清, 何宁. 适用于多种材料阵列微槽加工的聚晶金刚石铣槽刀制备[J]. 中国机械工程.

[1]	商鹏, 黄思硕, 刘晓鹏, 杨壮, 刘腾, 张建军. 二维振动辅助微细铣削切削力建模与试验研究[J]. 中国机械工程, 2021, 32(06): 648-657，665.
[2]	卞荣, 何宁, 李亮, 钱军, 史振宇, 陈明君. 微细铣削氧化锆陶瓷铣削力特征分析[J]. 中国机械工程, 2014, 25(23): 3200-3206.
[3]	石文天;;王西彬;刘玉德;刘志兵;. 基于响应曲面法的微细铣削表面粗糙度预报模型与试验研究[J]. J4, 2009, 20(20): 0-2519.