[1]张清东,陈先霖.CVC四辊冷轧机板形控制策略[J].北京科技大学学报,1996,18(4):347-351.
ZHANG Qingdong,CHEN Xianlin.Flatness Control Stategy for CVC-Hi Cold Rolling Mill[J].Journal of University of Science and Technology Beijing,1996,18(4):347-351.
[2]李月,张小平,刘光明,等.四辊板带轧机辊颈载荷分布及板形影响因素分析[J].轧钢,2014,31(6):1-4.
LI Yue,ZHANG Xiaoping,LIU Guangming,et al.Roll Neck Load Distribution and Strip Shape Analysis of Four-high Strip Mill[J].Steel Rolling,2014,31(6):1-4.
[3]白振华,韩林芳,李经洲,等.辊轧机非常态轧制时板形模型的研究[J].机械工程学报,2012,48(20):77-82.
BAI Zhenhua,HAN Linfang,LI Jingzhou,et al.Research of the Plate-shaped Model of Four-roll Mill When Rolling under Asymmetric State[J].Journal of Mechanical Engineering,2012,48(20):77-82.
[4]KAPIL S,EBERHARD P,DWIVEDY S K. Dynamic Analysis of Cold-rolling Process Using the Finite-element Method[J]. Journal of Manufacturing Science and Engineering,2015,138(4):1-10
[5]白振华,常金梁,郭乾勇,等.AS-UCM机型的开发及其板形控制技术[J].中国机械工程,2015,26(10):1390-1394.
BAI Zhenhua,CHANG Jinliang,GUO Qianyong,et al. Development of AS-UCM Temper Mill and Its Shape Control Technology[J].China Mechanical Engineering,2015,26(10):1390-1394.
[6]梁勋国,矫志杰,王国栋,等.冷连轧机板形控制原理的研究[J].重型机械,2007(5): 22-24.
LIANG Xunguo,JIAO Zhijie,WANG Guodong,et al. Study on Flatness Control in Tandem Cold Mills[J]. Heavy Macinery,2007(5):22-24.
[7]李晓燕,张杰,陈先霖,等.单机平整机轧辊的磨损及其对板形的影响[J].北京科技大学学报,2002,24(3):326-328.
LI Xiaoyan,ZHANG Jie,CHEN Xianlin,et al.Wear of Rolls in Single-stand Temper Mill and Its Effect on the Strip Shape[J]. Journal of University of Science and Technology Beijing,2002,24(3):326-328.
[8]朱红斌,栗守维,王国栋,等.四辊轧机工作辊横移对板形的影响[J].钢铁,1989,24(8):28-32.
ZHU Hongbin,LI Shouwei,WANG Guodong,et al. Effects of Work Shifting of Strip Shape[J]. lron and Steel,1989,24(8):28-32.
[9]刘华,杨荃,何安瑞.张力对大宽厚比铝箔板形的影响[J].塑性工程学报,2005,12(4):62-65.
LIU Hua,YANG Quan,HE Anrui.Influence of tension on Aluminum Foil Profile under Large Width to Thickness Ratio[J]. Journal of Plasticity Engineering,2005,12(4):62-65.
[10]汪飞雪,臧新良,于辉,等.张力对PQF连轧成形过程的影响机制[J].钢铁,2014,49(11):46-52.
WANG Feixue,ZANG Xinliang,YU Hui,et al.Influence Mechanism of Tension on PQF Continuous Rolling Process[J]. Iron and Steel,2014,49(11):46-52.
[11]白振华,刘宏民,李秀军,等.平整轧制工艺模型[M].北京:冶金工业出版社,2010:53-67.
BAI Zhenhua, LIU Hongmin,LI Xiujun,et al.Flat Rolling Process Model[M]. Beijing: Metallurgical Industry Press,2010:53-67.
[12]连家创,刘宏民.板形板厚控制[M].北京:兵器工业出版社,1995:65-68.
LIAN Jiachuang,LIU Hongmin.Control on Thick and Shape of Strip[M]. Beijing: Arms Instudry Press,1995:65-68. |