[1]刘克军,范学,李高林. 开关力特性曲线研究[J]. 汽车电器,2012,51(7):9-11.
LIU Kejun, FAN Xue, LI Gaolin. On the Performance Curve of Switch Power[J]. Auto Electric Parts,2012,51(7):9-11.
[2]刘岩睿,夏群生,何乐. 汽车转向管柱组合开关的力特性研究[J]. 汽车工程,2003,26(3):336-340.
LIU Yanrui,XIA Qunsheng,HE Le. Test and Measurement of Mechanical Characteristic of Multi-Function Switch System on Vehicles[J]. Automotive Engineering,2003,26(3):336-340.
[3]张金萍,罗鹏,张利国,等. 基于等距三次均匀有理B样条曲线反求设计方法的研究[J]. 沈阳化工学院学报,2005,19(3):216-219.
ZHANG Jinping, LUO Peng, ZHANG Liguo, et al.Reverse Design of High Precision Cam Based on Offset Cubic Uniform Rational B-spline Curve[J]. Journal of Shenyang Institute of Chemical Technology,2005,19(3):216-219.
[4]侯悦民,张伟,鲍莉. 利用三次均匀B样条曲线优化设计凸轮廓线[J].农业机械学报,2003, 31(1):71-74.
HOU Yuemin, ZHANG Wei, BAO Li.Optimization of Cam Contour by B-spline Curve[J]. Transactions of the Chinese Society of Agricultural Machinery,2003,31(1):71-74.
[5]ERDELYI H, TALABAD.A Novel Method for the Dynamic Synthesis of Cam Mechanisms with an Imposed Driving Force Profile[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2010,224(8):1771-1782.
[6]张永曙,刘克轩,蒋大为. 计算机辅助几何设计的数学方法[M]. 西安:西北工业大学出版社,1986:166-167.
ZHANG Yongshu, LIU Kexuan, JIANG Dawei. Mathematical Methods in Computer Aided Geometric Design[M]. Xi'an:Northwestern Polytechnical University Press,1986:166-167.
[7]TSAY D, HUEY C. Cam Motion Synthesis Using Spline Functions[J]. Journal of Mechanical Design,1988,110(2):161-165.
[8]MANDAL M, NASKAR T. Introduction of Control Points in Splines for Synthesis of Optimized Cam Motion Program[J]. Mechanism and Machine Theory,2009,44(1):255-271.
[9]毛征宇,刘中坚.一种三次均匀B样条曲线的轨迹规划方法[J]. 中国机械工程,2010,21(21):2569-2572.
MAO Zhengyu, LIU Zhongjian.A Trajectory Planning Method for Cubic Uniform B-spline Curve[J].China Mechanical Engineering,2010,21(21):2569-2572.
[10]TSAY D M, LIN B J. Improving the Geometry Design of Cylindrical Cams Using Nonparametric Rational B-splines[J].Computer-Aided Design,1996,28(1):5-15. |