压电膜片式微喷的多场耦合仿真模型及其应用

摘要/Abstract

摘要： 基于自行设计制造的压电驱动膜片式微喷装置的实际结构，建立了一个多场耦合的数值模型，用来研究压电驱动的膜片式微滴喷射过程中的参数作用和变化规律。在模型的建立过程中，对流体部分的湍流判定和表面力作用的关键技术问题进行了分析研究。该模型能较好地模拟微喷装置工作过程。利用该模型研究了驱动波形对液滴属性的决定关系，以及液体腔中一个工作周期内压力的变化规律等问题。

关键词: 压电驱动, 膜片式微喷装置, 数值模拟, 按需喷射

Abstract: A multi-field coupling numerical model was presented based on an actual structure of a piezoelectric actuated diaphragm-driven microjet printhead that designed and manufactured by the authors. The effects of each parameters were studied in the model. Some important problems of the model such as the judgement of turbulent flow and the effects of the surface force were considered. The relations among the driving wave forms and the droplet properties and the pressure changes in the chamber during a working period were studied with this model.

Key words: piezoelectric actuated； diaphragm-driven microjet printhead, numerical simulation, drop-on-demond

中图分类号:

TH16

王堃, 习俊通, . 压电膜片式微喷的多场耦合仿真模型及其应用[J]. 中国机械工程.

WANG Kun, XI Juntong, . Multi-field Coupling Numerical Model and Its Applications of Piezoelectric Actuated Diaphragm-driven Microjet[J]. China Mechanical Engineering.

参考文献

[1]CHEN Y, HUANG Y, KUO C, et al. Investigation of Design Parameters for Droplet Generators Driven by Piezoelectric Actuators[J]. International Journal of Mechanical Sciences,2007,49(6):733-740.
[2]KIM C S, PARK S, SIM W, et al. Modeling and Characterization of an Industrial Inkjet Head for Micro-patterning on Printed Circuit Boards[J]. Computers & Fluids,2009,38(3):602-612.
[3]SACHS E, VEZZETTI E. Numerical Simulation of Deposition Process for a New 3D Printhead Design[J]. Journal of Materials Processing Technology,2005,161(3):509-515.
[4]习俊通，周诗贵，王堃. 压电驱动膜片式高温热熔微喷点胶装置,中国：CN201210465518.3[P].2013-3-13.
XI Juntong, ZHOU Shigui, WANG Kun. High-temperature-melting Spray Dispensing Equipment of Piezoelectric Actuated Diaphragm-driven, China: CN201210465518.3[P].2013-3-13.
[5]阎超. 计算流体力学方法及应用[M]. 北京: 北京航空航天大学出版社, 2006.
YAN Chao. Methods and Applications of Computational Fluid Dynamics[M]. Beijing: Beihang University Press, 2006.
[6]LAUNDER B E, SPALDING D B. Lectures in Mathematical Models of Turbulence[M]. London: Academic Press, 1972.
[7]FINNEMORE J E, FRANZINI J B. Fluid Mechani-cs[M]. Columbus, Ohio: McGraw-Hill,2002.
[8]李战华，崔海航. 微尺度流动特性[J]. 机械强度,2001,23(4):476-480.
LI Zhanhua, CUI Haihang. Characteristics of Micro Scale Flow[J]. Journal of Mechanical Strength,2001,23(4):476-480.
[9]刘赵淼，逄燕. 不同压力差下微通道尺寸和表面粗糙度对摩擦系数的影响[J]. 工程力学,2012,29(5):200-205.
LIU Zhaomiao, PANG Yan. Influences of Size and Roughness of Microchannels on Friction Factors Under Different Pressures[J]. Engineering Mechanics,2012,29(5):200-205.
[10]李凡，仲伟虹，张佐光，等. 连续纤维复合材料快速原型工艺基础研究[J]. 中国机械工程,2001,12(12):1415-1417.
LI Fan, ZHONG Weihong, ZHANG Zuoguang, et al. Preliminary Research on Rpm for the Continuous Fiber Reinforced Composite[J]. China Mechanical Engineering,2001,12(12):1415-1417.
[11]周诗贵，习俊通. 压电驱动膜片式微滴喷射仿真与尺度一致性试验研究[J]. 机械工程学报,2013,49(8):178-185.
ZHOU Shigui, XI Juntong. Simulation and Experiment Study on Piezoelectric Actuated Diaphragm-driven Microdroplet Jetting[J]. Chinese Journal of Mechanical Engineering,2013,49(8):178-185.
[12]KIM B, KIM S, LEE J, et al. Dynamic Characteristics of a Piezoelectric Driven Inkjet Printhead Fabricated Using MEMS Technology[J]. Sensors and Actuators A: Physical,2012,173(1):244-253.
[13]KHALATE A A, BOMBOIS X, BABU KA R, et al. Performance Improvement of a Drop-on-demand Inkjet Printhead Using an Optimization-based Feedforward Control Method[J]. Control Engineering Practice,2011,19(8):771-781.

[1]	林超, 沈忠磊, 李坪洋, 郑山. 垂直型多级位移放大机构设计与力学解析建模[J]. 中国机械工程, 2021, 32(08): 908-915，937.
[2]	郭威, 孙洪鸣, 徐高飞, 李广伟, 周悦, 王敏健, . 全海深着陆车着底冲击特性与集中应力结构改进[J]. 中国机械工程, 2021, 32(07): 867-874.
[3]	杜飞;王新云;邓磊;夏巨谌;金俊松. 高速冲击连接技术的研究进展[J]. 中国机械工程, 2021, 32(05): 600-610.
[4]	乔巍1;姚卫星1,2. 剪滞效应对复合材料固化变形影响的数值分析[J]. 中国机械工程, 2021, 32(05): 611-616,623.
[5]	胡健1;陈泽中1;刘涛2;杨金华3. 车门防撞梁热成形工艺优化仿真与试验[J]. 中国机械工程, 2021, 32(01): 92-100.
[6]	花少震, 孟凡净, 刘华博, 丁海. [成形过程仿真优化与集成计算材料工程]注射成形熔体喷射的三维模拟及消除对策研究[J]. 中国机械工程, 2020, 31(22): 2715-2722.
[7]	胡冕;丁晓红. 热管滚珠丝杠热性能仿真和实验[J]. 中国机械工程, 2020, 31(20): 2445-2453.
[8]	王林1;潘骏1;贺青川1;丁炜2;顾利威2. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19): 2379-2387.
[9]	包道日娜；刘旭江；王小雪；王帅龙；刘嘉文. 小型水平轴可变偏心距风力机输出特性分析[J]. 中国机械工程, 2020, 31(18): 2196-2205.
[10]	童哲铭1；陈尧1；童水光1；余跃1；李进富2；郝国帅3. 基于NSGA-Ⅲ算法的低比转速离心泵多目标优化设计[J]. 中国机械工程, 2020, 31(18): 2239-2246.
[11]	沈建邦;肖俊华;梁希;徐耀玲. 负泊松比曲边内凹蜂窝结构的面内冲击动力学数值研究[J]. 中国机械工程, 2020, 31(16): 1998-2004.
[12]	邹伟生1;刘瑞仙1;刘少军2. 粗颗粒海底矿石浆体提升电泵研究[J]. 中国机械工程, 2019, 30(24): 2939-2944.
[13]	岳敏楠1;李春1,2;郝文星1;张俊伟1. 气动弹片对翼型气动及噪声特性的影响[J]. 中国机械工程, 2019, 30(12): 1409-1416.
[14]	梁博健1;高殿荣2. 高压水除鳞喷嘴结构参数对喷嘴射流性能的影响[J]. 中国机械工程, 2018, 29(24): 2939-2946.
[15]	罗晓龙;刘军;田始军;林立;周纯. 基于离散单元法的铝粉冲击加载过程三维数值模拟[J]. 中国机械工程, 2018, 29(20): 2515-2519.