[1]Jacobsen J O, Winder B G, Howell L L. Lamina Emergent Mechanisms and Their Basic Elements[J]. Journal of Mechanisms and Robotics, 2010,2(1):1-9.
[2]Wilding S E, Howell L L, Magleby S P. Spherical Lamina Emergent Mechanisms[J]. Mechanism and Machine Theory, 2012,49:187-197.
[3]王涛. LEMs四杆机构的分析及其特性参数的研究[D]. 北京:北京科技大学, 2012.
[4]邱丽芳, 韦志鸿, 徐金梧. 新型平面折展机构柔性铰链等效刚度分析[J]. 机械工程学报, 2014,50(17):25-30.
Qiu Lifang, Wei Zhihong, Xu Jinwu. Analysis of Equivalent Stiffness of New LEMs Flexure Hinge[J]. Journal of Mechanical Engineering. 2014, 50(17):25-30.
[5]王超, 陈光焱, 吴嘉丽. 用于低gn值微惯性开关的低刚度平面微弹簧设计与制作[J]. 光学精密工程, 2011,19(3):620-627.
Wang Chao, ChenGuangyan, Wu Jiali. Development of Planar Micro-spring with Low Stiffness in Low-gn Micro Inertial Switch[J]. Optics and Precision Engineering, 2011,19(3):620-627.
[6]吴佳俊, 王帮峰, 芦吉云,等. 镍钛诺合金涡卷弹簧的力学建模与测试[J]. 光学精密工程, 2014,22(4):963-969.
Wu Jiajun, Wang Bangfeng, Lu Jiyun, et al. Mechanical Modeling and Test If Nitinol Spiral Spring[J]. Optics and Precision Engineering, 2014,22(4):963-969.
[7]周织建, 聂伟荣, 席占稳,等. MEMS平面S形锥形弹簧的特性分析研究[J]. 微电子学, 2014,44(4):559-594.
Zhou Zhijian, Nie Weirong, Xi Zhanwen, et al. Study on Characteristics of MEMS Planar S-Form Conical Spring[J]. Microelectronics, 2014,44(4):559-594.
[8]李华, 石庚辰. MEMS平面微弹簧刚度分析[J]. 压电与声光, 2007,29(2):237-239.
Li Hua, Shi Gengchen. The Stiffness Analysis of MEMS Planar Microspring[J]. Piezoelectrics and Acoustooptics, 2007,29(2):237-239.
[9]吴志亮, 常娟, 冯鹏洲, 等. 引信用MEMS 平面微弹簧弹性系数分析[J]. 南京理工大学学报(自然科学版),2008,32(2):140-141.
WuZhiliang, Chang Juan, Feng Pengzhou, et al. Elastic Coefficient Analysis of MEMS Planar Microspring Used in Fuse[J]. Journal of Nanjing University of Science and Technology (Natural Science), 2008,32(2):140-141.
[10]Kim J Y, Lee H J, Cho Y H. Anti-buckling S-shapedVertical Microprobes with Branch Springs[J]. Microelectronic Engineering, 2010,87(9):1769-1776.
[11]豪厄尔.柔顺机构学[M]. 余跃庆,译. 北京: 高等教育出版社,2007.
[12]周慧. LEMs柔性铰链的分析与研究[D]. 北京: 北京科技大学,2012.
[13]刘鸿文. 材料力学[M]. 北京: 高等教育出版社.2004.
[14]Chen G, Howell L L. Two General Solutions of Torsional Compliance for Variable Rectangular Cross-section Hinges in Compliant Mechanisms[J]. Precision Engineering, 2009,33(3):268-274.
|