加载路径对AA5083管件热态非金属颗粒介质成形性能的影响

摘要/Abstract

摘要： 将颗粒介质作为传力介质,应用于铝合金管件内高压热成形工艺。通过热单向拉伸试验建立AA5083板材的本构模型。通过管材热态颗粒介质胀形数值模拟,结合AA5083理论成形极限图的分析,研究了不同加载路径对管件壁厚分布、管端缩料量和主应变曲线的影响规律,并进行了相应的工艺试验验证。研究结果表明,合理匹配初始压头力和管端进给量参数,使预成形管坯在胀形区形成有益皱纹,可为胀形区管坯变形提供聚料作用,从而提高管件成形质量和胀形极限。

关键词: 铝合金管材, 热成形, 非金属颗粒, 加载路径

Abstract: Non-metallic granule (NMG) was used as the pressure-transfer medium and applied to the hot internal high-pressure forming technology on tube herein. The constitutive model of AA5083 sheet was created by the hot uniaxial tensile tests. Based on the numerical simulation of bulging on tube with NMG medium and the forming limit diagram (FLD), the influences of loading paths on the distribution of tube thickness, the contraction length of tube end and the path of principal strain were studied. All the work above were also verified by technological tests in the end. The results show that a reasonable match of initial punch force and axial feeding makes tube form a beneficial wrinkle in bulging region which is helpful in improving the forming limit because the material is gathered in the bulging region beforehand.

Key words: aluminum alloy tube, hot forming, non-metallic granule, loading path

中图分类号:

TG146.2

陈晓华, 赵长财, 董国疆, 杨卓云, 曹秒艳, . 加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J]. 中国机械工程.

Chen Xiaohua, Zhao Changcai, Dong Guojiang, Yang Zhuoyun, Cao Miaoyan, . Formability of Hot Non-metallic Granule Medium of AA5083 Aluminum Alloy Tube under Various Loading Paths[J]. China Mechanical Engineering.

参考文献

[1]赵长财, 王银思, 李晓丹，等. 固体颗粒介质成形工艺变形模型研究[J]. 中国机械工程, 2007, 18(1):75-79.

Zhao Changcai, Wang Yinsi, Li Xiaodan, et al. Research on Forming Model of Solid Granules Medium Forming Technology[J].China Mechanical Engineering, 2007, 18(1):75-79.

[2]董国疆, 赵长财, 曹秒艳，等. 圆筒件固体颗粒介质成形壁厚及变形规律研究[J]. 中国机械工程, 2010, 21(16):1992-1998.

Dong Guojiang, Zhao Changcai,Cao Miaoyan, et al. Study on Wall-thickness and Deformation Regularity of Cylinder Part Based on Solid Granules Medium Forming[J]. China Mechanical Engineering, 2010, 21(16):1992-1998.

[3]赵长财, 李晓丹, 董国疆，等. 板材固体颗粒介质成形新工艺及其数值模拟[J]. 机械工程学报, 2009, 45(6):211-215.

Zhao Changcai, Li Xiaodan, Dong Guojiang, et al. Solid Granules Medium Forming Technology and Its Numerical Simulation[J]. Journal of Mechanical Engineering,2009, 45(6):211-215.

[4]董国疆, 赵长财, 曹秒艳,等. 管板材SGMF工艺传压介质的物理性能试验[J]. 塑性工程学报, 2010, 17(4):71-75.

Dong Guojiang, Zhao Changcai,Cao Miaoyan, et al. Experiment Research on Physical Properties of Pressure-transfer Medium in SGMF of Plates and Pipes[J]. Journal of Plasticity Engineering, 2010, 17(4):71-75.

[5]杜冰. 固体颗粒介质管材窄环带胀缩成形工艺研究[D]. 秦皇岛:燕山大学, 2014.

[6]曹秒艳. 镁合金板材固体颗粒介质拉深成形工艺理论及试验研究[D]. 秦皇岛:燕山大学, 2012.

[7]杜冰, 赵长财, 刘一江，等. 管材内高压成形变形模式研究[J]. 机械工程学报, 2014, 50(16):126-134.

Du Bing, Zhao Changcai, Liu Yijiang, et al. Research on Different Patterns of Tube Bulging Process[J].Journal of Mechanical Engineering, 2014, 50(16):126-134.

[8]杜冰, 赵长财, 李雪峰，等. 高温合金凸环管件固体颗粒介质成形工艺[J]. 中国有色金属学报, 2014, 24(7):1721-1729.

Du Bing, Zhao Changcai, Li Xuefeng, et al. Forming Technology of High Temperature Alloy Convex Ring Shaped Tube by Solid Granule Medium[J]. The Chinese Journal of Nonferrous Metals,2014, 24(7):1721-1729.

[9]Du Bing, Zhao Changcai, Dong Guojiang. Study on Thin-walled Tube Forming by Solid Granule Medium Forming[J]. ICIC Express Letters, 2014, 8:2649-2654.

[10]赵长财, 任学平, 董国疆，等. 管材固体颗粒介质成形工艺及其塑性理论研究[J]. 中国机械工程, 2007, 18(16):2000-2005.

Zhao Changcai, Ren Xueping, Dong Guojiang, et al. Processes of Solid Granule Medium Forming and Plastic Research[J].China Mechanical Engineering, 2007, 18(16):2000-2005.

[11]赵长财, 董国疆, 肖宏，等. 管材固体颗粒介质成形新工艺[J]. 机械工程学报, 2009, 45(8):255-260.

Zhao Changcai, Dong Guojiang, Xiao Hong, et al. New Process of Solid Granule Medium Forming[J].Journal of Mechanical Engineering, 2009, 45(8):255-260.

[12]Hashemi S J, Naeini H M, Liaghat G H. Prediction of Bulge Height in Warm Hydroforming of Aluminum Tubes Using Ductile Fracture Criteria[J]. Archives of Civil and Mechanical Engineering, 2015, 15(1):19-29.

[13]Valente R A F, Jorge R M N, Roque A P. Simulation of Dissimilar Tailor-welded Tubular Hydroforming Processes Using EAS-based Solid Finite Elements[J]. The Internationl Journal of Advanced Manufacturing Technology, 2008, 37(7):670-689.

[14]Song W J, Heo S C, Ku T W. Evaluation of Effect of Flow Stress Characteristics of Tubular Material on Forming Limit in Tube Hydroforming Process[J]. International Journal of Machine Tools and Manufacture, 2010, 50(9):753-764.

[15]Muammer K. Investigation of the Effect of Loading Path and Variation in Material Properties on Robustness of the Tube Hydroforming Process[J]. Journal of Materials Processing Technology, 2003, 133(3):276-281.

[16]Imaninejad M, Subhash G, Loukus A. Loading Path Optimization of Tube Hydroforming Process[J]. International Journal of Machine Tools and Manufacture, 2005, 45(12/13):1504-1514.

[17]Hama T, Ohkubo T, Kurisu K, et al. Formability of Tube Hydroforming under Various Loading Paths[J]. Journal of Materials Processing Technology, 2006, 177(1/3):676-679.

[18]Yuan Shijian, Cui Xiaolei, Wang Xiaosong. Investigation into Wrinkling Behavior of Thin-walled 5A02 Aluminum Alloy Tubes under Internal and External Pressure[J]. International Journal of Mechanical Sciences, 2015, 92:245-258.

[19]Cui Xiaolei, Wang Xiaosong, Yuan Shijian. Deformation Analysis of Double-sided Tube Hydroforming in Square-section Die[J]. Journal of Materials Processing Technology, 2014, 214(7):1341-1351.

[20]Mirzaali M, Seyedkashi S M H, Liaghat G H. Application of Siumlated Annealing Method to Pressure and Force Loading Optimization in Tube Hydroforming Process[J]. International Journal of Mechanical Sciences, 2012, 55(1):78-84.

[21]Heo S C, Kim J, Kang B S. Investigation on Determination of Loading Path to Enhance Formability in Tube Hydroforming Process Using APDL[J]. Journal of Materials Processing Technology, 2006, 177(1/3):653-657.

[22]Li Shuhui, Yang Bing, Zhang Weigang, et al. Loading Path Prediction for Tube Hydroforming Process Using a Fuzzy Control Strategy[J]. Materials and Design, 2008, 29(6):1110-1116.

[23]Dong Guojiang, Zhao Changcai, Cao Miaoyan. Flexible-die Forming Process with Solid Granule Medium on Sheet Metal[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2013, 23(9):2666-2677.

[24]于忠奇, 侯波, 李淑慧, 等. 耦合温度和应变率的铝合金板成形极限预测方法[J]. 机械工程学报, 2010, 46(8):37-41.

Yu Zhongqi, Hou bo, Li Shuhui, et al. Prediction of Forming Limit for Aluminum Alloy Sheet Coupling with Temperature and Strain Rate[J]. Journal of Mechanical Engineering, 2010, 46(8):37-41.

[25]刘宝胜, 郎利辉, 李慧丽, 等. 铝合金板材温热介质成形本构建模方法综述[J]. 塑性工程学报, 2011, 18(3):53-60.

Liu Baosheng, Lang Lihui, Li Huili, et al. Review on Methods of Constitutive Modeling in Warm/hot Hydroforming[J]. Journal of Plasticity Engineering,2011, 18(3):53-60.