中国机械工程

• 机械基础工程 • 上一篇    下一篇

基于动态滑模算法的AMT选换挡电机控制

何雄1;张农1;孔国玲2   

  1. 1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082
    2.清华大学,北京,100084
  • 出版日期:2016-05-25 发布日期:2016-05-19

Dynamic Sliding Mode Control of AMT Gear-selection and Shifting Electric Motors

He Xiong;Zhang Nong;Kong Guoling   

  1. 1.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha,410082
    2.Tsinghua University,Beijing,100084
  • Online:2016-05-25 Published:2016-05-19

摘要: 针对电动机械式自动变速器换挡时间较长的特点,对电动AMT选换挡电机进行分析和建模;基于动态滑模理论,提出了一种换挡电机动态滑模控制方法,并将它应用于电动AMT汽车选换挡执行机构的位置跟踪控制。仿真与试验结果都表明,与常规的PID控制器和滑模控制器相比,动态滑模控制器响应速度快、鲁棒性好、跟踪精度高,能有效地改善AMT的换挡品质。

关键词: 电动机械式自动变速器, 动态滑模控制, 选换挡, 电动机

Abstract: Modeling and analyses were carried out on a electric AMT, in order to assuage the long gear selection and shifting time problem of AMT. Based on the theory of sliding mode control, gear selection and shifting dynamic sliding model control was initiated, which was applied in the position track of gear selection and shifting mechanism. Both of the simulation and experimental results reveal that compared to the general PID controller and sliding model controller, dynamic sliding model controller has faster response, better robust, higher track accuracy, which improves the shifting quality of electrical AMT.

Key words: electrical automatic manual transmission(AMT), dynamic sliding mode control, gear-selection and shifting;motor

中图分类号: