应变强化对022Cr17Ni12Mo2奥氏体不锈钢显微组织和力学行为的影响

摘要/Abstract

摘要： 采用电液伺服万能试验机、X射线衍射仪、金相显微镜和透射电子显微镜，研究了应变强化对022Cr17Ni12Mo2奥氏体不锈钢微观组织和力学行为的影响。结果表明：前期预应变强化过程中，材料没有发生相变，形变孪晶数量的增加使材料的屈服强度和硬度得到大幅提高，但塑性有所降低，发生形变孪晶诱发强度效应。随着预应变量的增大，应变强化能力减弱，瞬变应变有所降低，位错的滑移模式发生转变，从单系滑移和平面滑移向多系滑移和交滑移转变。

关键词: 应变强化, 形变孪晶诱发强度, 力学行为, 022Cr17Ni12Mo2奥氏体不锈钢

Abstract: The effects of strain-strengthening on microstructure and mechanics behavior of 022Cr17Ni12Mo2 austenitic stainless steel were investigated by universal testing machine, X-ray diffraction, optical microscopy, and transmission electron microscopy. The results show that there is no phase transformation during the early stage of pre-strain strengthening. With the increase of deformation twins, the cold deformation can enhance the strength and hardness significantly, whereas the ductility of the steel is decreased. The deformation twinning induced strength effects are occurred. Meanwhile, the strain-strengthening ability of the strengthened steel and the transient strain are weakened with increase of the pre-strain. The appearance of deformation twins makes the change of dislocation slip mode, which transforms from single-slip and planar-slip to multiple-slip and cross-slip.

Key words: strain strengthening, deformation twinning induced strength, mechanics behavior, 022Cr17Ni12Mo2 austenitic stainless steel

中图分类号:

TG142.1

孔韦海, 陈学东, 闫永超, 胡盼. 应变强化对022Cr17Ni12Mo2奥氏体不锈钢显微组织和力学行为的影响[J]. 中国机械工程.

Kong Weihai, Chen Xuedong, Yan Yongchao, Hu Pan. Effects of Strain-strengthening on Microstructure and Mechanics Behavior of 022Cr17Ni12Mo2 Austenitic Stainless Steel[J]. China Mechanical Engineering.

参考文献

[1]郑津洋, 缪存坚, 寿比南. 轻型化——压力容器的发展方向[J]. 压力容器, 2009, 26(9): 42-48.

Zheng Jinyang, Miao Cunjian, Shou Binan. Light-weight: a Trend in the Development of Pressure Vessels[J]. Pressure Vessel Technology, 2009, 26(9): 42-48.

[2]范志超, 陈学东, 崔军, 等. 我国重型压力容器轻量化设计制造技术研究进展[J]. 压力容器, 2013, 30(2): 59-65.

Fan Zhichao, Chen Xuedong, Cui Jun, et al. Research Progress of Lightweight Design & Manufacture Technology of Heavy Pressure Vessels in China[J]. Pressure Vessel Technology, 2013, 30(2): 59-65.

[3]邓阳春, 陈钢, 杨笑峰, 等. 奥氏体不锈钢压力容器的应变强化技术[J]. 化工机械, 2008, 35(1): 54-59.

Deng Yangchun, Chen Gang, Yang Xiaofeng, et al. Strain Strengthening Technology of Pressure Vessels of Austenitic Stainless Steel[J]. Chemical Engineering and Machinery, 2008, 35(1): 54-59.

[4]Andrade M S, Gomes O A，Vilela J M C, et al. Formability Evaluation of Two Austenitic Stainless Steels[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2004，26: 47-50.

[5]Llewellyn D T. Work Hardening Effects in Austenitic Stainless Steels[J]. Materials Science and Technology, 1997, 13(5): 389-400.

[6]刘树勋, 刘宪民, 刘蕤, 等. 0Cr21Ni6Mn9N奥氏体不锈钢的应变强化行为[J]. 钢铁研究学报, 2005, 17(4): 40-44.

Liu Shuxun, Liu Xianmin, Liu Rui, et al. Work-hardening Behavior of 0Cr21Ni6Mn9N Austenitic Stainless Steel[J]. Journal of Iron and Steel Research, 2005, 17(4): 40-44.

[7]Kubota S, Xia Y, Tomota Y. Work-hardening Behavior and Evolution of Dislocation-microstructures in High-nitrogen Bearing Austenitic Steels[J]. ISIJ International, 1998, 38(5): 474-481.

[8]王松涛, 杨柯, 单以银, 等. 高氮奥氏体不锈钢与316L不锈钢的冷变形行为研究[J]. 金属学报, 2007, 43(2): 171-176.

Wang Songtao, Yang Ke, Shan Yiyin, et al. Study of Cold Deformation Behaviors of a High Nitrogen Austenitic Stainless Steel and 316L Stainless Steel[J]. Acta Metallurgica Sinica, 2007, 43(2): 171-176.

[9]Simmons J W. Strain Hardening and Plastic Flow Properties of Nitrogen-alloyed Fe-17Cr-(8-10)Mn-5Ni Austenitic Stainless Steels[J]. Acta Materialia, 1997, 45(6): 2467-2475.

[10]Ludwigson D C. Modified Stress-strain Relation for FCC Metals and Alloys[J]. Metallurgical Transactions B, 1971, 2(10): 2825-2828.

[11]Soussan A, Degallaix S, Magnin T. Work-hardening Behaviour of Nitrogen-alloyed Austenitic Stainless Steels[J]. Materials Science and Engineering: A, 1991, 142(2): 169-176.

[12]李雅娴. 应变强化奥氏体不锈钢低温容器材料和成形工艺研究[D]. 杭州：浙江大学，2010.

[13]中国国家标准化管理委员会. GB/T 228.1-2010. 金属材料室温拉伸试验方法[S]. 北京：中国标准出版社, 2011.

[14]Committee ME/1. Pressure Equipment. AS 1210 Supplement 2-1999. Pressure Vessels-cold-stretched Austenitic Stainless Steel Vessels(Supplement to AS 1210-1997)[S]. Homebush：Standards Australia，1999.

[15]British Standards Institution. BS EN13458-2：2002 Cryogenic Vessels-static Vacuum Insulated Vessels-Part 2：Design，Fabrication，Inspection and Testing[S]. London：The Standards Policy and Strategy Committee，2002.

[16]Sweden Industry Standard. Cold-stretching Directions 1991[S]. Stockholm: Swedish Pressure Vessel Standardization. 1991.

[17]The ASME Boiler and Pressure Vessel Standards Committee. Case 2596-coldstretching of Austenitic Stainless Steel Pressure Vessels[S]. New York：ASME，2008.

[18]Müllner P, Solenthaler C, Uggowitzer P, et al. On the Effect of Nitrogen on the Dislocation Structure of Austenitic Stainless Steel[J]. Materials Science and Engineering: A, 1993, 164(1): 164-169.

[19]Stoltz R E, Vander Sande J B. The Effect of Nitrogen on Stacking Fault Energy of Fe-Ni-Cr-Mn Steels[J]. Metallurgical Transactions A, 1980, 11(6): 1033-1037.

[20]Mi Zhenli, Tang Di, Yan Ling, et al. High-strength and High-plasticity TWIP Steel for Modern Vehicle[J]. Journal of Materials Science & Technology, 2005, 21(4): 451-454.

[21]Mori T, Fujita H. Dislocation Reactions during Deformation Twinning in Cu-11 at.%Al Single Crystals[J] Acta Metallurgica. 1980, 28(6): 771-776.