基于横观各向同性假定的固定结合部本构关系及有限元模型

摘要/Abstract

摘要： 提出了一种固定结合部的有限元建模方法。该方法将接触层等效成均质、虚拟的横观各向同性材料。根据结合面的变形和载荷关系，推导了虚拟材料本构矩阵中5个独立变量与法向应力之间的非线性关系。将这个本构关系引入到有限元分析中用以建立机器的固定联接面模型。分析结果与试验结果的对比证实了该方法的有效性。

关键词: 固定连接, 虚拟材料, 有限元, 本构关系

Abstract: A finite element method modeling fixed joints was presented. In the method, the contact layers of the fixed joints were regarded as a homogenous virtual transverse isotropic material. According to the relations among deformations and loads of joints, the nonlinear relations among 5 independent variables and normal stress in constitutive matrix were deduced, and then the relations were introduced into finite element analysis to model fixed joints. The analytical results and experimental results of the joints were compared and the validity of the method was confirmed.

Key words: fixed joint, virtual material, finite element, constitutive law

中图分类号:

TH123

赵金娟, 王世军, 杨超, 王诗义, 杨慧新. 基于横观各向同性假定的固定结合部本构关系及有限元模型[J]. 中国机械工程.

Zhao Jinjuan, Wang Shijun, Yang Chao, Wang Shiyi, Yang Huixin. A Constitutive Law Based on Transverse Isotropic Hypothesis and Finite Element Model of Fixed Joints[J]. China Mechanical Engineering.

参考文献

[1]赵宏林, 丁庆新, 曾鸣，等. 机床结合部特性的理论解析及应用[J]. 机械工程学报, 2008, 44(12):208-213.

Zhao Honglin, Ding Qingxin, Zeng Ming, et al. Theoretic Analysis on and Application of Behaviors of Machine Tool Joints[J]. Journal of Mechanical Engineering, 2008, 44(12): 208-213.

[2]石坤, 宋俐, 师俊平. 机械结合部等效材料参数建立与试验[J]. 农业机械学报, 2014, 44(6): 297-301.

Shi Kun, Song Li, Shi Junping. Establishment and Experiment of Mechanical Joint Equivalent Material Properties[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 44(6): 297-301.

[3]黎定仕, 张以都, 王鹏. 基于结构阻尼的机械结合部动力学模型研究[J]. 振动与冲击, 2010, 29(8): 204-208.

Li Dingshi, Zhang Yidu， Wang Peng. Dynamic Model of Machine Joints Based on Structural Damping[J]. Journal of Vibration and Shock, 2010, 29(8): 204-208.

[4]米良, 殷国富, 孙明楠, 等. 结合部动力学特性的立柱-主轴系统动力学模型研究[J]. 农业机械学报, 2011, 42(12): 202-207.

Mi Liang, Yin Guofu, Sun Mingnan, et al. Column-spindle System Dynamic Model Based on Dynamic Characteristics of Joints[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(12):202-207.

[5]刘恒, 刘意, 王为民. 接触界面法向刚度等效的新方法[J]. 机械工程学报, 2011, 47(17): 37-43.

Liu Heng, Liu Yi, Wang Weimin. New Equivalent Method for Normal Stiffness of ContactInterface[J]. Journal of Mechanical Engineering, 2011, 47(17): 37-43.

[6]Tian Hongliang, Li Bin, Liu Hongqi, et al. A New Method of Virtual Material Hypothesis-based Dynamic Modeling on Fixed Joint Interface in Machine Tools[J]. International Journal of Machine Tools & Manufacture, 2011, 51: 239-249.

[7]Ahmadian H, Ebrahimi M, Mottershead J, et al. Identification of Bolted Joints Interface Models[C]// Proceedings of ISMA 2002: Noise and Vibration Engineering. Leuven, Belgium, 2002: 1741-1747.

[8]Ahmadian H, Jalali H, Mottershead J, et al. Dynamic Modeling of Spot Welds Using Thin Layer Interface Theory[C]//Proceedings of the Tenth Int. Congress on Sound and Vibration ICSV10. Stockholm, Sweden, 2003: 3439-3446.

[9]Ahmadian H, Mottershead J, James S, et al. Modelling and Updating of Large Surface-to-surface Joints in the AWE-MACE Structure[J]. Mechanical Systems and Signal Processing, 2006, 20: 868-880.

[10]Desai C, Zaman M, Lightner J, et al. Thin-layer Element for Interfaces and Joints[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1984, 8: 19-43.

[11]Sharma K, Desai C. Analysis and Implementation of Thin-layer Element for Interfaces and Joints[J]. Journal of Engineering Mechanics， 1992, 118: 2442-2462.

[12]Pande G, Sharma K. On Joint/interface Elements and Associated Problems of Ill-conditioning[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1979, 3: 293-300.

[13]Bograd S, Reuss P, A Schmidt, et al. Modeling the Dynamics of Mechanical Joints[J]. Mechanical Systems and Signal Processing, 2011, 25: 2801-2826.

[14]刘新东, 刘伟. 复合材料力学基础[M]. 西安: 西北工业大学出版社, 2010.

[15]Fu W P, Huang Y M, Zhang X L, et al. Experimental Investigation of Dynamic Normal Characteristics of Machined Joint Surfaces[J]. Journal of Vibration and Acoustics, Transactions of the ASME, 2000, 122: 393-398.

[16]石坤, 宋俐, 师俊平, 等. 一种新的机械结构结合部特性分析方法[J]. 机械工程学报, 2013, 49(1): 142-147.

Shi Kun, Song Li, Shi Junping, et al. A New Method for Characteristic Analysis of the Mechanical Structure Joint[J]. Journal of Mechanical Engineering, 2013, 49(1): 142-147.

[17]秦太验, 徐春晖, 周喆. 有限元法及其应用[M]. 北京: 中国农业大学出版社, 2011.

[18]Ni Jun, Zhu Zhenqi. Experimental Study of Tangential Micro Deflection of Interface of Machined Surfaces[J]. Journal of Manufacturing Science and Engineering, 2001, 123: 365-367.