基于多色集合的微线段齿轮表面工程技术工艺建模

中国机械工程 ›› 2016, Vol. 27 ›› Issue (06): 815-821.

基于多色集合的微线段齿轮表面工程技术工艺建模

杨沁;许祥;陈李云;黄康

合肥工业大学，合肥，230009

出版日期:2016-03-25 发布日期:2016-03-24
基金资助:
国家自然科学基金资助项目(51075111)

Micro Segment Gear Surface Engineering Process Modeling Based on Polychromatic Sets

Yang Qin;Xu Xiang;Chen Liyun;Huang Kang

Hefei University of Technology，Hefei，230009

Online:2016-03-25 Published:2016-03-24
Supported by:

摘要/Abstract

摘要：

针对产品零部件表面工程技术工艺建模复杂的问题，以多色集合理论为辅助对表面工程技术工艺建模进行深入研究。首先，运用多色集合理论选择表面工程技术方法并对工艺规划进行数学建模，建立表面功能需求映射矩阵和表面工程技术工艺需求围道矩阵。然后，将表面处理技术工艺需求划分为循环需求和线性需求，通过进化算法和多色图理论分别对两种需求对应的工艺路线进行求解。最后，以微线段齿轮的表面处理工艺过程作为验证，获得合理的表面处理工艺路线。

关键词: 表面工程技术, 多色集合理论, 工艺建模, 微线段齿轮

Abstract:

According to the complex problems of surface engineering process modeling of product components,polychromatic sets theory was proposed to assist the research of surface engineering process modeling. Firstly, polychromatic set theory was used to in process planning of surface engineering technology and to built mathematical model of the selected method. Surface functional requirement mapping matrix and surface engineering technology requirements contour matrix were established. Secondly, surface treatment technology process requirements were divided into cycle requirements and linear requirements, evolutionary algorithms and polychromatic graph were used to find the solutions of the process routes for two kinds of requirements respectively. Finally, process of surface treatment technology of micro segment gear was used as a verification, and a reasonable surface treatment process route was obtained.

Key words: surface engineering technology, polychromatic sets theory, process modeling, micro segment gear

中图分类号:

TP391

杨沁, 许祥, 陈李云, 黄康. 基于多色集合的微线段齿轮表面工程技术工艺建模[J]. 中国机械工程, 2016, 27(06): 815-821.

Yang Qin, Xu Xiang, Chen Liyun, Huang Kang. Micro Segment Gear Surface Engineering Process Modeling Based on Polychromatic Sets[J]. China Mechanical Engineering, 2016, 27(06): 815-821.

参考文献

[1]赵韩, 梁锦华, 刘红雨, 等. 微线段齿廓的形成原理及特性[J]. 机械工程学报, 1997, 36(4): 119-122.

Zhao Han, Liang Jinhua, Liu Hongyu, et al. The Formation Principle and the Characteristics of the Micro Line Segment Tooth Profile[J]. Journal of Mechanical Engineering, 1997, 36(4): 119-122.

[2]谭俊, 杜军. 离子束表面工程技术的进展[J]. 中国表面工程, 2012, 25(5): 6-13.

Tan Jun, Du Jun. The Progress of the Ion Beam Surface Engineering Technologies[J]. China Surface Engineering, 2012, 25(5): 6-13.

[3]Muratore C, Hu J J, Voevodin A A. Tribological Coatings for Lubrication over Multiple Thermal Cycles[J]. Surface and Coatings Technology, 2009, 203(8): 957-962.

[4]高新勤, 李宗斌, 赵姗姗. 基于多色集合理论的概念设计建模和推理技术研究[J]. 中国机械工程, 2006, 17(3): 255-259.

Gao Xinqin, Li Zongbin, Zhao Shanshan. Study on the Concept of Design Modeling and Reasoning Technology Based on Polychromatic Sets Theory[J]. China Mechanical Engineering, 2006, 17(3), 255-259.

[5]刘雪梅, 孟飞飞, 李爱平, 等. 基于多色集合理论和遗传算法的加工中心工步排序研究[J]. 中国机械工程, 2013, 24(18): 2437-2442.

Liu Xuemei, Meng Feifei, Li Aiping, et al. Study on Machining Center Work Step Based on Polychromatic Sets Theory and Genetic Algorithm[J]. China Mechanical Engineering, 2013, 24(18): 2437-2442.

[6]王崴, 马跃, 徐浩, 等. 基于多色集合理论的螺栓装配工艺建模方法[J]. 计算机集成制造系统, 2014, 20(8): 1851-1858.

Wang Wei, Ma Yue, Xu Hao, et al. Study on Bolt Assembly Process Modeling Method Based on Polychromatic Sets Theory[J]. Computer Integrated Manufacturing System, 2014, 20(8): 1851-1858.

[7]Pavlov V V. Polychromatic Sets and Graphs for CALS in Machine Building[M]. Moscow: Stankin Press, 2002.

[8]宣天鹏. 表面工程技术的设计与选择[M]. 北京：机械工业出版社, 2011.

[9]李宗斌, 高新琴, 赵丽萍. 基于多色集合理论的信息建模与优化技术[M]. 北京：科学出版社, 2010.

[10]黄翰, 林智勇, 郝志峰, 等. 基于关系模型的进化算法收敛性分析与对比[J]. 计算机学报, 2011, 34(5): 801-811.

Huang Han, Lin Zhiyong, Hao Zhifeng, et al. Study on Evolutionary Algorithm Convergence Analysis and Comparison Based on the Relational Model[J]. Chinese Journal of Computers, 2011, 34(5): 801-811.