金刚石飞切单晶硅的切削力模型及试验研究

摘要/Abstract

摘要：

首先对金刚石飞切单晶硅的加工特点进行分析，建立了未变形切屑厚度模型及材料去除类型的理论判定条件；然后推导出了适合金刚石飞切加工特点和单晶硅材料特性的数学预测模型；最后进行了切削力正交试验，并通过切削力试验值与模型计算值对比验证了切削力模型的合理性。同时根据试验结果总结了各主要加工参数（切深ap、进给量f、主轴转速n）及其产生的最大未变形切屑厚度hmax对切削力的影响规律。

关键词: 单晶硅, 金刚石飞切, 切削力模型, 未变形切屑厚度

Abstract:

The processing characteristics of single crystal silicon under diamond fly-cutting were analyzed herein,and the mathematical model for the undeformed chip thickness and the theoretical determinant criteria which may distinguish the types of materials removal were built separately,then the mathematical prediction model of the cutting force was established, which befits both the traits of diamond fly-cutting technology and the material properties of single crystal silicon, finally the cutting forces were measured through the cutting orthogonal experiments of the silicon wafer under the diamond fly-cutting.As a result, the rationality of cutting force model was proved by comparing the calculated values and the experimental measured values of cutting force, meanwhile, the influence rules of the largest undeformed chip thickness hmax and the main working parameters on cutting forces were summarized based on the experimental results.

Key words: single , crystal , silicon;diamond fly-cutting;cutting , force , model;undeformed chip thickness

中图分类号:

TG501.3

闫艳燕, 王润兴, 赵波. 金刚石飞切单晶硅的切削力模型及试验研究[J]. 中国机械工程, 2016, 27(04): 507-512.

Yan Yanyan, Wang Runxing, Zhao Bo. Cutting Force Model and Experiments of Single Crystal Silicon under Diamond Fly-cutting[J]. China Mechanical Engineering, 2016, 27(04): 507-512.

参考文献

[1]程祥，高斌，杨先海，等.微细塑性铣削单晶硅实验研究[J].山东理工大学学报(自然科学版)，2012,26(4):53-55.

Cheng Xiang,Gao Bin,Yang Xianhai,et al.Experimental Study on the Ductile-mode Micromilling of Single Crystalline Silicon[J].Journal of Shandong University of Technology(Natural Science Edition),2012,26（4）：53-55.

[2]Xie J,Xie H F,Liu X R,et al.Dry Micro-grooving on Si Wafer Using a Coarse Diamond Grinding[J].International Journal of Machine Tools & Manufacture,2012,61:1-8.

[3]赵清亮,郭兵,杨辉,等.金刚石飞切加工微结构表面的工艺参数优化[J].光学精密工程,2009,17(10):2512-2519.

Zhao Qingliang,Guo Bing,Yang Hui,et al.Technological Parameter Optimization of Microstructured Surfaces by Diamond Fly-cutting[J]. Optics and Precision Engineering,2009,17(10):2512-2519.

[4]Davies M A,Evans C J,Patterson S R.Application of Precision Diamond Machining to the Manufacture of Microphotonics Components[J]. SPIE,2003,5183:94-108.

[5]程军,王超,温雪龙,等.单晶硅微尺度磨削材料去除过程试验研究[J].机械工程学报,2014,50（17）:194-200.

Cheng Jun,Wang Chao,Wen Xuelong,et.al.Experimental Investigation on Material Removal Process for Micro-grinding of Single Crystal Silicon[J].Journal of Mechanical Engineering,2014,50(17):194-200.

[6]Cheng J, Gong Y D,Experimental Study of Surface Generation and Force Modeling in Micro-grinding of Single Crystal Silicon Considering Crystallographic Effects[J].International Journal of Machine Tools & Manufacture,2014,77:1-15.

[7]Yan Jiwang,Syoji K,Tamaki J.Some Observations on the Wear of Diamond Tools in Ultra-precision Cutting of Single-crystal Silicon[J]. Wear,2003,255:1380-1387.

[8]郭兵.微结构表面的金刚石飞切加工研究[D].哈尔滨:哈尔滨工业大学,2008.

[9]刘勇,尹自强,李圣怡,等.微槽结构单点金刚石飞切加工的切削力建模[J].国防科学技术大学学报,2014,36(2):175-180.

Liu Yong,Yin Ziqiang,Li Shengyi,et al.Cutting Force Model for Fabrication of Microgroobves by Single Point Diamond Flycutting[J]. Journal of National University of Defense Technology,2014,36(2):175-180.

[10]Malkin S,Hwang T W.Grinding Mechanism for Ceramics[J],Ann.,CIRP.,1996,45(2):569-580.

[11]Zhang Xu,Li Hao,Xiao Dingbang,et al.Experimental Study on the Equivalent Mechanical Properties of Single Crystal Silicon[J]. Chinese Journal of Sensors and Actuators，2012,25(8):1059-1063.

[12]Hughes D A,Liu Q,Chrzan D C,et al.Scaling of Microstructural Parameters:Misorientations of Deformation Induced Boundaries[J]. Acta Mater.1997,45(1):105-112.

[13]Cheng X,Nakamoto K,Sugai M,et al.Development of Ultra-precision Machining System with Unique Wire EDM Tool Fabrication System for Micro/Nanomachining[J].CIRP Annals,2008,57(1)：415-420.

[14]Park H W,Liang S Y,Chen R.Microgrinding Force Predictive Modelling Based on Microscale Single Grain Interaction Analysis[J]. International Journal of Manufacturing Technology and Management,2007,25(12):1-3.