塔磨机运行参数优化匹配的仿真分析与试验研究

中国机械工程 ›› 2016, Vol. 27 ›› Issue (04): 483-487.

塔磨机运行参数优化匹配的仿真分析与试验研究

肖正明1,2;王鑫;伍星1,2;龙稳2

1.昆明理工大学,昆明,650500
2.云南省矿冶重型装备工程研究中心,昆明,650501

出版日期:2016-02-25 发布日期:2016-03-03
基金资助:
云南省自然科学基金资助项目(2013FB014);云南省科技计划资助项目(2014XB054)

Simulation Analyses and Experimental Investigation on Optimum Matching of Operating Parameters of Tower Mill

Xiao Zhengming1,2;Wang Xin;Wu Xing1,2;Long Wen2

1.Kunming University of Science & Technology,Kunming,650500
2.Mining & Metallurgy Heavy Equipment Engineering Research Center of Yunnan Province,Kunming, 650501

Online:2016-02-25 Published:2016-03-03
Supported by:

摘要/Abstract

摘要：

现有对塔磨机运行参数优化匹配研究不足，影响了塔磨机磨矿效率的提高及其工程应用，为此应用离散元法对某塔磨机主要的运行参数进行了仿真，对碰撞能量、碰撞频率、功率消耗等与磨矿性能相关的物理量进行了研究，并通过试验分析了各运行参数对矿料粒度的影响，验证了模拟分析的准确性。研究结果表明，在临界转速下，转速越高，研磨效率越高，该塔磨机最优的转速为210r/min；填充率过低则磨矿强度较低，填充率过高则能量利用率下降，综合考虑磨矿强度及能量利用率，该塔磨机的最优填充率为60%。

关键词: 塔磨机, 运行参数, 优化匹配, 离散元法

Abstract:

The existing researches on optimum matching of operating parameters of the tower mill were insufficient, which affected the development of the grinding efficiency and the engineering applications of tower mills.A DEM was used to simulate the main operating parameters of tower mill. Collision energy,collision frequency, power consumption and other physical quantities which were related to the grinding performance were studied.The effects of the operating parameters on the aggregate particle size were obtained through the experiments and the accuracy of the simulation analyses was verified. The results show that, under the critical speed, the higher the speed the better the grinding efficiency and the optimal speed of the tower mill is 210r/min;if the filling rate is so low that the grinding strength will also be low, if the filling rate is so high that the energy utilization rate will decline. Comprehensive consideration of the grinding strength and energy utilization rate, the optimal filling rate of the tower is as 60%.

Key words: tower mill, operating parameter;optimum matching, discrete element method(DEM)

中图分类号:

TD453

肖正明, 王鑫, 伍星, 龙稳. 塔磨机运行参数优化匹配的仿真分析与试验研究[J]. 中国机械工程, 2016, 27(04): 483-487.

Xiao Zhengming, Wang Xin, Wu Xing, Long Wen. Simulation Analyses and Experimental Investigation on Optimum Matching of Operating Parameters of Tower Mill[J]. China Mechanical Engineering, 2016, 27(04): 483-487.

参考文献

[1]Sinnott M,Cleary P W,Rob M.Analysis of Stirred Mill Performance Using DEM Simulation:Part 1-Media Motion,Energy Consumption and Collisional Environment[J].Minerals Engineering,2006,19:1537-1550.

[2]Cleary P W,Sinnott M,Morrison R.Analysis of Stirred Mill Performance Using DEM Simulation:Part 2-Coherent Flow Structures,Liner Stress and Wear,Mixing and Transport[J].Minerals Engineering,2006,19:1551-1572.

[3]Sinnott M D,Cleary Pl W,Morrison R D.Is Media Shape Important for Grinding Performance in Stirred Mills[J]. Minerals Engineering, 2011,24:138-151.

[4]Toraman O Y, Katircrcioglu D. A Study on the Effect of Process Parameters in Stirred Ball Mill[J].Advanced Powder Technology, 2011, 22:26-30.

[5]Patel C M,Murthy Z V P,Chakraborty M.Effects of Operating Parameters on the Production of Barium Sulfate Nanoparticles in Stirred Media Mill[J].Journal of Industrial and Engineering Chemistry,2012,18:1450-1457.

[6]Oktay C,Nevzat A,Ibrahim A,et al.Optimization of Some Parameters of Stirred Mill for Ultra-fine Grinding of Refractory Au/Ag Ores[J]. Powder Technology,2011,208:121-127.

[7]Soualo O,Christine F.Grinding of Calcite Suspensions in a Stirred Media Mill:Effect of Operational Parameters on the Product Quality and the Specific Energy[J].Powder Technology,2014,255:89-97.

[8]母福生,杨鹏.搅拌磨机介质运动离散元数值模拟分析[J].中国机械工程,2012,23(20):2465-2468.

Mu Fusheng,Yang Peng.Analysis of DEM Numerical Simulation of Media Movement for a Stirred Mill[J].China Mechanical Engineering, 2012, 23(20):2465-2468.

[9]乞英焕.转速和填充率对卧式搅拌磨磨矿效果的影响[D].昆明:昆明理工大学,2014.

[10]胡国明.颗粒系统的离散元素法分析仿真[M].武汉: 武汉理工大学出版社,2010.

[11]Lutz B,Arno K,Jorg S.Motion and Stress Intensity of Grinding Beads in a Stirred Media Mill.Part 1:Energy Density Distribution and Motion of Single Grinding Beads[J].Power Technology,1996,86:59-68.

[12]Arno K,Lutz B,Jorg S.Motion and Stress Iintensity of Grinding Beads in a Stirred Media Mill.Part 2:Stress Intensity and Its Effect on Comminution[J].Powder Technology,1996,86:69-76.

[13]赵选恒,董为民,陈国鼎,等.卧式搅拌磨机结构参数对其性能影响的研究[J].矿山机械,2013,41(2):75-79.

Zhao Xuanheng,Dong Weimin,Chen Guoding,et al.Study on Effects of Structural Parameters of Horizontal Stirred Mill on Its Grinding Performance[J].Mining & Processing Equipment,2013,41(2):75-79.

[14]董方.塔式球磨机介质运动特征及关键参数研究[D].长沙: 中南大学,2011.

[15]Okay A,Hakan B,Udo E.Effects of Operating Parameters on the Efficiency of Dry Stirred Milling[J].Minerals Engineering, 2013, 43/44:58-66.