一种盘式制动器钳体轻量化设计研究

摘要/Abstract

摘要：

以体积和疲劳寿命为轻量化设计目标，采用计算机辅助集成技术对盘式制动器的钳体进行轻量化设计。利用有限元分析方法计算制动盘制动力矩并将其与实验测得的制动力矩进行比较，验证了有限元分析的步骤与方法正确可行;结合有限元分析得到的钳体的最大主应力，根据名义应力法和Smith方法计算钳体疲劳寿命;通过ISIGHT集成CATIA、ABAQUS和MATLAB对钳体进行轻量化设计。

关键词: 制动钳体, 轻量化, 有限元分析, 制动力矩, 疲劳寿命

Abstract:

Taking volume and fatigue life as lightweight design goal, an integrated computer-aided technology was used for disc brake caliper's lightweight design. First, through comparing the barking torque which got by FEA and experiments it is proved that FEA's steps and methods are correct and feasible. Then, combining the maximum principal stress which got by FEA with nominal stress method and Smith method was used to calculate the fatigue of caliper. Finally, Through ISIGHT integrating CATIA、ABAQUS and MATLAB, the lightweight of caliper was performed.

Key words: brake caliper, lightweight, finite element analysis(FEA), brake torque, fatigue life

中图分类号:

TP302

唐进元, 赵国伟. 一种盘式制动器钳体轻量化设计研究[J]. 中国机械工程, 2015, 26(17): 2285-2290.

Tang Jinyuan, Zhao Guowei. Research on Lightweight Design for Disc Brake Caliper[J]. China Mechanical Engineering, 2015, 26(17): 2285-2290.

参考文献

[1]蔡运迪, 唐文献, 黄秋芸, 等. 水冷盘式制动器热疲劳失效有限元分析[J].中国机械工程, 2012, 23(22):2726-2731.
Cai Yundi, Tang Wenxian, Huang Qiuyun, et al. Finite Element Analysis(FEM) on Thermal Fatigue Failure of Water-cooling Disc Brake[J]. China Mechanical Engineering, 2012, 23(22):2726-2731
[2]Ksemann C P, Huart M, Stobbe F, et al. Mechanical Braking System for the Pulsed Power Supply System of ASDEX Upgrade[J]. Fusion Engineering and Design, 2013, 88(9): 1491-1494.
[3]Hohmann C, Schiffner K, Oerter K. Contact Analysis for Drum Brakes and Disk Brakes Using ADINA[J]. Computers & Structures, 1999, 72(1): 185-198.
[4]Liu P, Zheng H, Cai C. Analysis of Disc Brake Squeal Using the Complex Eigenvalue Method[J]. Applied Acoustics, 2007, 68(6): 603-615.
[5]Belhocine A, Bouchetara M. Thermal Analysis of a Solid Brake Disc[J]. Applied Thermal Engineering, 2012, 32: 59-67.
[6]Duraiselvam M, Valarmathi A, Shariff S M. Laser Surface Nitrided Ti-6Al-4V for Light Weight Automobile Disk Brake Rotor Application[J]. Wear, 2014, 309(1): 269-274.
[7]Kim J G, Jang G W. Development of a Lightweight Frame for a 40-foot Flatbed Trailer by Using CAE-based Structural Optimization[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011, 225(5): 643-652.
[8]张勇, 李光耀, 王建华. 多目标遗传算法在整车轻量化优化设计中的应用研究[J]. 中国机械工程, 2009, 10(4): 500-503.
Zhang Yong, Li Guangyao, Wang Jianhua.Design Optimization on Lightweight of Full Vehicle Based on Muti –objective Genetic Algorithm[J]. China Mechanical Engineering, 2009, 10(4): 500-503.
[9]Jegadeeshwaran R, Sugumaran V. Comparative Study of Decision Tree Classifier and Best First Tree Classifier for Fault Diagnosis of Automobile Hydraulic Brake System Using Statistical Features[J]. Measurement, 2013, 46(9): 3247-3260.
[10]崔泗鹏, 姚卫星, 夏天翔. 连接件振动疲劳寿命分析的名义应力法[J]. 中国机械工程, 2014, 25(18): 2519-2522.
Cui Sipeng, Yao Weixing, Xia Tianxiang. Nominal Stress Approach for Fatigue Life Prediction of Mutifastener Joints under Vibration Loading[J]. China Mechanical Engineering, 2014, 25(18): 2519-2522.
[11]朱森第. 机械工程材料性能数据手册[M]. 北京: 机械工业出版社, 1994.
[12]秦大同, 谢里阳. 现代机械设计手册(第6卷)[M]. 北京: 化学工业出版社, 2011.
[13]赵少汴, 王忠保. 抗疲劳设计——方法与数据[M]. 北京: 机械工业出版社, 1997.
[14]raml M, Flaker J. Computational Approach to Contact Fatigue Damage Initiation Analysis of Gear Teeth Flanks[J]. The International Journal of Advanced Manufacturing Technology, 2007, 31(11/12): 1066-1075.
[15]Fajdiga G, Sraml M. Fatigue Crack Initiation and Propagation under Cyclic Contact Loading[J]. Engineering Fracture Mechanics, 2009, 76(9): 1320-1335.
[16]Xia Z, Kujawski D, Ellyin F. Effect of Mean Stress and Ratcheting Strain on Fatigue Life of Steel[J]. International Journal of Fatigue, 1996, 18(5): 335-341.