中国机械工程 ›› 2015, Vol. 26 ›› Issue (16): 2262-2271.

• 学科发展 • 上一篇    下一篇

航空液压管接头综述

欧阳小平1;方旭1;朱莹2;王锴3;杨华勇1   

  1. 1.浙江大学流体动力与机电系统国家重点实验室,杭州,310027
    2.航空机电系统综合航空科技重点实验室,南京,211100
    3.中航工业机电系统股份有限公司,北京,100164
  • 出版日期:2015-08-25 发布日期:2015-08-25
  • 基金资助:
    国家自然科学基金资助项目(51275450);国家重点基础研究发展计划(973计划)资助项目(2014CB046403);浙江大学基本科研业务费专项基金资助项目(2013FZA4004) 

Overview of Aviation Hydraulic Fittings

Ouyang Xiaoping1;Fang Xu1;Zhu Ying2;Wang Kai3;Yang Huayong1   

  1. 1.State Key Laboratory of  Fluid Power Transmission and Control,Zhejiang University,Hangzhou,310027
    2.Aviation Key Laboratory of  Science  and  Technology  on Aero Electromechanical System Integration,Nanjing,211100
    3.China Aviation Industry Electromechanical  Systems Corporation,Beijing,100164
  • Online:2015-08-25 Published:2015-08-25
  • Supported by:
    National Natural Science Foundation of China(No. 51275450);National Program on Key Basic Research Project (973 Program)(No. 2014CB046403)

摘要:

航空液压管接头是直接影响飞机安全和可靠性的重要元件。为全面了解各类航空液压管接头性能,介绍了永久式、可分离式和柱端式三大类航空液压管接头的基本特点;从结构、原理、使用范围、设计标准和供应商等方面对主要液压管接头进行了详细阐述;
从耐压能力、拉脱强度、质量和安装等方面对比分析了三大类管接头中每种管接头的性能和优缺点;针对不同压力级别系统给出了航空液压管接头的选择推荐,展望了航空液压管接头未来的发展方向,指出了我国在该领域与国际先进水平的差距。

关键词: 航空, 液压管接头, 永久式, 可分离式, 柱端式

Abstract:

The  aviation  hydraulic fitting is one of the most important components which directly affects  the safety and reliability of aircrafts.A comprehensive overview was intended to introduce the general features of the aviation hydraulic fittings.The performance of three main types of aviation hydraulic fittings was demonstrated, including permanent fittings,separable fittings and boss fittings.The structure, principles,applications,design standards and suppliers of each type were illustrated.The characteristics of each main type fitting such as pressure resistance,pull-off  strength,weight  and  installation,were  analyzed and compared.The recommended selections of aviation hydraulic fittings for different pressure levels were summarized.Finally,the developing prospect of aviation hydraulic fittings was given, and the large distance in the aviation hydraulic fittings between China and the international advanced level was pointed out.

Key words: aviation, hydraulic fitting, permanent, separable, boss

中图分类号: