电磁谐波活齿传动转矩特性分析

中国机械工程 ›› 2015, Vol. 26 ›› Issue (15): 2000-2005.

电磁谐波活齿传动转矩特性分析

任玉波;许立忠;梁永丽

燕山大学河北省并联机器人与机电系统实验室，秦皇岛，066004

出版日期:2015-08-10 发布日期:2015-08-04
基金资助:
国家自然科学基金资助项目（51275441）

Analysis on Torque Characteristics of Harmonic Electromagnetic Movable Tooth Transmission

Ren Yubo;Xu Lizhong;Liang Yongli

Parallel Robot and Mechatronic System Laboratory of Hebei Province,Yanshan University,Qinhuangdao,Hebei,066004

Online:2015-08-10 Published:2015-08-04
Supported by:
National Natural Science Foundation of China（No. 51275441）

摘要/Abstract

摘要：

提出一种新型的机电集成传动系统，分析了该传动系统的工作原理，基于弹性小变形及变形协调假设，对活齿进行了受力分析，给出了理论状态下啮合力分析的模型和算法，结合啮合力计算示例获得了该种传动装置的啮合力分布特点，推导了传动系统的输出力矩，研究了输出力矩随传动比、线圈匝数、活齿半径、气隙系数、定子槽数等多种参数的变化规律。根据分析结果，对该种传动机构的参数进行了合理的优化。

关键词: 机电集成, 柔轮, 活齿, 转矩

Abstract:

A new type of electromechanical integrated transmission system was presented, this transmission system working principles were analyzed, based on a small elastic deformation and deformation coordination assumptions, the stress of movable tooth was analyzed. The meshing force analysis model and algorithm were given under the theoretic status, in accordance with meshing force calculation sample the transmission device preliminary meshing force distribution characteristics were obtained. The transmission output torque was derived, the variation laws were studied,that indicated the relationship among output torque and transmission ratio, the number of turns, tooth radius, gap coefficient and stator slots.Based on this result,it can optimize the parameters of this transmission mechanism.

Key words: electromechanical integrated, flexspline, movable tooth, torque

中图分类号:

TH132

任玉波, 许立忠, 梁永丽. 电磁谐波活齿传动转矩特性分析[J]. 中国机械工程, 2015, 26(15): 2000-2005.

Ren Yubo, Xu Lizhong, Liang Yongli. Analysis on Torque Characteristics of Harmonic Electromagnetic Movable Tooth Transmission[J]. China Mechanical Engineering, 2015, 26(15): 2000-2005.

参考文献

[1]Li N, Wang S M, Du J J. Natural Characteristics and Dynamic Load Coefficient of Power Four Embranchments Gear Transmission[J]. Journal of Aerospace Power, 2013, 28(2): 445-451.
[2]Schier M, Rinderknecht F. Innovation Examples for Ecological Vehicles Based on Aerospace Research[C] //2013 8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER). New York:IEEE, 2013: 1-7.
[3]Delucchi M A, Jacobson M Z. Providing All Global Energy with Wind, Water, and Solar Power, Part II: Reliability, System and Transmission Costs, and Policies[J]. Energy Policy, 2011, 39(3): 1170-1190.
[4]Heath G F, Slaughter S C, Fisher D J, et al. Helical Face Gear Development Under the Enhanced Rotorcraft Drive System Program[C]//67th American Helicopter International Annual Forum.2011,May 3-5.
[5]任玉波,许立忠,梁永丽.电磁式谐波传动机电耦合系统对柔轮变形的影响分析[J]. 燕山大学学报, 2013，37(3)：211-216.
Ren Yubo,Xu Lizhong,Liang Yongli. Analysis of Flexible Spline Deformation in Electromagnetic Harmonic Drive Motor Coupling Systems[J]. Journal of Yanshan University, 2013,37(3):211-216.
[6]Ren Yubo, Xu Lizhong, Wu Yushuang. Study on Principle of Electromechanical Integrated Electromagnetic Harmonic Oscillating Teeth Transmission[J]. International Journal of Advancements in Computing Technology,2012,4(16):183-192.
[7]Ren Yubo, Xu Lizhong. Analysis on the Finite Element of Electromechanic Coupling of Flexible Gear in Electromagnetic Harmonic Drive[J]. Applied Mechanics and Mechanical Engineering,2013,249/250(15):771-777.
[8]王洪欣.螺旋副钢球行星传动机构的运动学与受力分析[J]. 机械传动, 1998, 22(1): 9-12.
Wang Hongxin. Kinematics and Force Analysis of Screw Pair Steel Ball Planetary Transmission Mechanism[J]. Journal of Mechanical Transmission, 1998, 22(1): 9-12.
[9]Glabwell G M L.经典弹性理论中的接触问题[M].范天佑,译.北京: 北京理工大学出版社, 1991.
[10]任玉波，许立忠，梁永丽.机电集成电磁式谐波摩擦传动柔轮的受力与变形分析[J].中国机械工程， 2011，22(10)：1169-1172.
Ren Yubo,Xu Lizhong,Liang Yongli. Force and Deformation Analyses for Flexspline of an Electromechanical Integrated Electromagnetic Harmonic Friction Drive[J]. China Mechanical Engineering， 2011，22(10)：1169-1172.

[1]	宋守许1,2;胡孟成1,2;杜毅1,2;罗润东1,2. 混合定子铁心再制造电机应变数值仿真与转矩不平衡分析[J]. 中国机械工程, 2020, 31(09): 1080-1088.
[2]	时培成;王锁;张荣芸;肖平. 无刷直流电机两管导通零矢量直接转矩控制[J]. 中国机械工程, 2020, 31(06): 670-678.
[3]	杨纪楠;许立忠. 双级正弦活齿传动系统效率计算与实验研究[J]. 中国机械工程, 2019, 30(21): 2577-2582,2589.
[4]	宋守许;李诺楠;杜毅;刘涛. 抑制永磁同步电机转矩脉动的转子再设计方法[J]. 中国机械工程, 2019, 30(17): 2084-2090,2134.
[5]	曹富林;史旭飞;许立忠. 考虑范德华力的微型活齿传动系统应力分析[J]. 中国机械工程, 2019, 30(07): 831-839.
[6]	宋守许1，2;杜毅1，2;许可1，2. 定子铁心混合叠压再制造电机的齿槽转矩分析[J]. 中国机械工程, 2018, 29(19): 2364-2370.
[7]	宜亚丽;豆林瑞;郭辉;金贺荣. 双相外激波摆杆活齿传动耦合刚度[J]. 中国机械工程, 2018, 29(06): 644-649.
[8]	马壮1,3;方一鸣1,2;李建雄1;刘乐1. 时变负载转矩伺服电机驱动的连铸结晶器振动位移系统补偿控制[J]. 中国机械工程, 2018, 29(03): 295-300.
[9]	赵林峰1;陈久闪2;陈无畏1;张荣芸3. 基于转角的迭代学习控制策略下永磁同步电机EPS转矩脉动抑制方法[J]. 中国机械工程, 2017, 28(24): 2906-2913.
[10]	柴宗兴;许立忠. 机电集成形状记忆合金活齿传动装置受力分析[J]. 中国机械工程, 2017, 28(19): 2339-2345,2382.
[11]	姜海波;李艳茹;赵云鹏. 水平轴风力机的转矩性能及叶尖损失对其的影响[J]. 中国机械工程, 2017, 28(18): 2204-2208.
[12]	傅兵, 周云山, 高帅, 李泉, 安颖. 金属带式无级变速器带轮变形损失研究[J]. 中国机械工程, 2017, 28(12): 1420-1426.
[13]	王贡献, 郑春玲, 陈凯凯. 新型棘轮止逆波能收集装置建模及数值分析[J]. 中国机械工程, 2017, 28(11): 1319-1325.
[14]	苏宇锋, 叶志通, 张坤. 抗磁悬浮石墨转子理论分析与实验[J]. 中国机械工程, 2017, 28(09): 1039-1043.
[15]	郑淑琴, 龙江启. 电动汽车永磁无刷轮毂电机控制策略建模[J]. 中国机械工程, 2017, 28(06): 744-749,755.