复杂曲面上机器人自动喷涂路径规划方法

中国机械工程 ›› 2015, Vol. 26 ›› Issue (14): 1916-1919.

复杂曲面上机器人自动喷涂路径规划方法

王金涛1;徐金亭2

1.新松机器人自动化股份有限公司,沈阳,110168
2.大连理工大学,大连,116024

出版日期:2015-07-25 发布日期:2015-08-05
基金资助:
国家自然科学基金资助项目（51105058);中央高校基本科研业务费专项资金资助项目（DUT14QY35）
National Natural Science Foundation of China（No. 51105058）;
Fundamental Research Funds for the Central Universities( No. DUT14QY35)

A Method for Generating Robot Spraying Paths on Complex Surfaces with Islands

Wang Jintao1;Xu Jinting2

1.SIASUN Robot & Automation Co., Ltd.,Shenyang,110168
2.Dalian University of Technology,Dalian,Liaoning,116024

Online:2015-07-25 Published:2015-08-05
Supported by:

National Natural Science Foundation of China（No. 51105058）;
Fundamental Research Funds for the Central Universities( No. DUT14QY35)

摘要/Abstract

摘要：

针对目前含有岛屿或空洞的复杂曲面上机器人喷涂路径规划中存在的问题,提出一种能够保持轮廓平行的机器人喷涂路径设计方法。利用最小二乘坐标映射原理,将被喷涂曲面映射到二维平面域,建立目标曲面与二维平面域之间的一一映射关系,然后对平面映射域的内外边界进行连续偏置,构造能够保持轮廓平行的二维偏置曲线;进而以被喷涂曲面到二维平面域的坐标映射为向导,将无干涉二维偏置曲线逆映射到被喷涂曲面上，生成能够保持轮廓平行的喷涂路径，实现多岛屿或空洞复杂曲面上三维喷绘路径设计到二维平面的降维处理。实例仿真实验结果表明，所提方法简单实用，可在含有岛屿或空洞的复杂曲面上快速地生成能够保持轮廓平行的机器人喷涂路径。

关键词: 复杂曲面, 机器人喷涂, 路径规划

Abstract:

A method for generating robot spraying paths on complex surface with islands was proposed by using the coordinate mapping theory which was used to flatten the sprayed surface onto a plane.On this plane,the spray points were calculated by iteratively offsetting the inner and outer boundaries of the planar surface.Then,using the mapping from the sprayed surface to the planar region as a guide,the planar offset curves without self-intersections were mapped onto the sprayed surface inversely,thus forming the resulting contour-parallel spraying paths.Benefiting the mapping of the sprayed surface to the planar region,the task of generating the spaying paths was simplified from is reduced from 3D surface to 2D plane,geometric computations related to spraying path generation were considerably reduced,especially for self-intersection elimination of offset path. Finally, the proposed method was tested on several sample surfaces and is shown that it can generate contour-parallel spraying paths for complex surfaces nicely,especially for those with holes or islands.

Key words: complex , surface;robot , spraying;curve offsetting;path planning

中图分类号:

TP391

王金涛1;徐金亭2. 复杂曲面上机器人自动喷涂路径规划方法[J]. 中国机械工程, 2015, 26(14): 1916-1919.

Wang Jintao1;Xu Jinting2. A Method for Generating Robot Spraying Paths on Complex Surfaces with Islands[J]. China Mechanical Engineering, 2015, 26(14): 1916-1919.

参考文献

[1]Makhanov S S.Adaptable Geometric Patterns for Five-axis Machining:a Survey.International[J].Journal of Advanced Manufacturing Technology,2010,47(9/12):1167-1208.
[2]Lasemi A,Xue D Y,Gu P H.Recent Development in CNC Machining of Freeform Surfaces:a State-of-the-art Review[J].Computer-Aided Design,2010,42(7):641-654.
[3]Kiswanto G,Lauwers B,Kruth J P.Gouging Elimination through Tool Lifting in Tool Path Generation for Five-axis Milling Based on Faceted Models[J].International Journal of Advanced Manufacturing Technology,2007,32(3/4):293-309.
[4]陈晓兵,廖文和,戴宁.三角网格曲面等参数线刀轨生成算法[J].中国机械工程,2013,24(8):1047-1051.
Chen Xiaobing,Liao Wenhe,Dai Ning.Algorithm   for Iso-parametric Tool Path Generation for Triangular Mesh Surface Machining[J].China Mechanical Engineering,2013,24(8):1047-1051.
[5]Kout A,Müller H. Tool-adaptive Offset Paths on Triangular Mesh Workpiece Surfaces[J].Computer-Aided Design,2014,50:61-73.
[6]Huertas-Talón J   L,García-Hernández C,Berges-Muro   L,et al.Obtaining a Spiral Path for Machining STL Surfaces Using Non-deterministic Techniques and Spherical Tool[J]. Computer-Aided Design,2014,50:41-50.
[7]孙殿柱,崔传辉,刘健,等.三角网格曲面模型多轴数控加工刀轨生成算法[J].中国机械工程,2009,20(24):2449-2953.
Sun Dianzhu,Cui Chuanhui,Liu Jian,et al.A Generating Algorithm of Multi-axis NC Machining Tool Path for Triangular Mesh Surface Model[J].China Mechanical Engineering,2009,20(24):2449-2953.
[8]Chen T,Shi Z L.A Tool Path Generation Strategy for Three-axis Ball-end Milling of Free-form Surfaces[J].Journal of Materials Processing Technology,2008,208(1/3):259-2263.
[9]Ouyang D H,Feng H Y.Machining Triangular Mesh Surfaces via Mesh Offset Based Tool Paths[J].Computer- Aided Design and Applications,2008,5(1/4):254-265.
[10]Park S C,Chang M.Tool Path Generation for Surface Model with Defects[J].Computers in Industry,2010,61(1):75-82.
[11]Kim S J, Yang M Y.A CL Surface Deformation Approach for Constant Scallop Height Tool Path Generation from Triangular Mesh[J].International Journal of Advanced Manufacturing Technology,2006,28(3/4):314-320.
[12]Lee S G,Kim H C,Yang M Y.Mesh-based Tool Path Generation   for   Constant   Scallop-height Machining[J].International Journal of Advanced Manufacturing Technology,2008,37(1/2):15-22.
[13]Sun Y W, Guo D M,Jia Z Y.Spiral Cutting Operation Strategy for Machining of Sculptured Surfaces by Conformal Map Approach[J].Journal of Materials Processing Technology,2006,180 (1/3):74-82
[14]Li   W L,Yin Z P,Hunag Y,et al. Tool-path Generation Based on Angle-based Flattening[J].Proceedings of the IMechE,Part B:Journal of Engineering Manufacture,2010,224(10):1503-1509.
[15]Lévy B,Petitjean S,Ray N,et al.Least Squares Conformal Maps for Automatic Texture Atlas Generation[J].ACM Transactions on Graphics,2002,21(3):362-371.
[16]Choi B K,Park S C.A Pair-wise Offset Algorithm for 2D Point-sequence Curve[J].Computer-Aided Design,1999,31(12):735-745.
[17]Hansen A,Arbab F.An Algorithm for Generation NC Tool Paths for Arbitrarily Shaped Pockets with Islands[J].ACM Transactions on Graphics,1992,11(2):152-182.