串联结构产品可靠性建模与统计分析

中国机械工程 ›› 2015, Vol. 26 ›› Issue (12): 1607-1610.

串联结构产品可靠性建模与统计分析

陈晓平1,2;陈文华1;许家清2;胡如夫2

1.浙江理工大学机电产品可靠性技术研究浙江省重点实验室,杭州,310018
2.宁波工程学院,宁波,315016

出版日期:2015-06-25 发布日期:2015-06-29
基金资助:
国家自然科学基金资助项目(51275480,51305215);全国统计科学研究计划资助项目（2012LY061）
National Natural Science Foundation of China（No. 51275480,51305215）

Reliability Modeling and Statistical Analysis for Series Structural Products

Chen Xiaoping1,2;Chen Wenhua1;Xu Jiaqing2;Hu Rufu2

1.Zhejiang Province's Key Laboratory for Reliability Technology of Mechanical & Electrical Products,Zhejiang Sci-Tech University,Hangzhou,310018
2.Ningbo University of Technology,Ningbo,Zhejiang,315016

Online:2015-06-25 Published:2015-06-29
Supported by:
National Natural Science Foundation of China（No. 51275480,51305215）

摘要/Abstract

摘要：

针对电连接器接触对数量较小的情况下,其接触寿命不适宜用Weibull分布描述的问题，研究了串联结构产品可靠性建模及统计分析方法,建立了任意接触对数量下电连接器接触寿命分布的可靠性模型,研究了基于区间数据的模型参数点估计和Bootstrap区间估计方法。试验研究结果表明：对于串联结构产品，采用串联结构的真实分布比近似地采用威布尔分布的拟合优度高，可更加客观地评价产品的可靠性水平。

关键词: 电连接器, 串联系统, 可靠性模型, 统计分析

Abstract:

Due to the small number of electrical connector, the contact reliability life could not be described by the Weibull distribution model.This paper studied a new reliability modeling and statistical method, as well as the model parameter point estimation and Bootstrap interval estimation method for the reliability life analysis of any given numbers of electrical connector.The results were verified by the experiments and show that the real distribution may evaluate more accurately than Weibull distribution approximation model for the series structural products.

Key words: electrical connector, series system, reliability modeling, statistical analysis

中图分类号:

TH112

陈晓平1,2;陈文华1;许家清2;胡如夫2. 串联结构产品可靠性建模与统计分析[J]. 中国机械工程, 2015, 26(12): 1607-1610.

Chen Xiaoping1,2;Chen Wenhua1;Xu Jiaqing2;Hu Rufu2. Reliability Modeling and Statistical Analysis for Series Structural Products[J]. China Mechanical Engineering, 2015, 26(12): 1607-1610.

参考文献

[1]邱利琼,舒俊辉.串联系统可靠性模糊优化[J].重庆大学学报,2002,25(7):20-22.
Qiu Liqiong,Shu Junhui.Fuzzy Optimization for Reliability Apportionment of Series System[J].Journal of Chongqing University(Natural Sciecne Edition),2002,25(7):20-22.
[2]高亮,陈文华,刘娟,等.航天电连接器的空间环境效应和失效模式分析[J].中国机械工程,2010,21(13):1598-1604.
Gao Liang,Chen Wenhua,Liu Juan,et al.Analysis of Space Environment Effects and Failure Modes of Aerospace Electrical Connectors[J].China Mechanical Engineering,2010,21(13):1598-1604.
[3]陈文华,程耀东,李平真,等.航天电连接器的可靠性数学模型[J].航空学报,1997,18(6):732-734.
Chen Wenhua,Cheng Yaodong,Li Pingzhen,et al.Reliability Mathematics Model of Aerospace Electrical Connector[J].Acta Aeronautica Et Astronautica Sinica,1997,18(6):732-734.
[4]潘骏.航天电连接器振动可靠性建模与评估[D].杭州:浙江大学,2002.
[5]陈文华,杨帆,刘俊俊,等.航天电连接器的可靠性统计通用模型[J]. 机械工程学报,2012,48(22):177-181,188.
Chen Wenhua,Yang Fan,Liu Junjun,et al.Theory and Method for Simulation Evaluation of Accelerated Life Test Plan under Step-stress[J].Journal of Mechanical Engineering,2012,48(22):177-181,188.
[6]钱萍,陈文华,马子魁,等.综合应力加速寿命模型验证方法的研究[J].机械工程学报,2010,46(24):156-161.
Qian Ping,Chen Wenhua,Ma Zikui,et al.Research of Multiple Stresses Accelerated Life Model Verification Method[J].Journal of Mechanical Engineering,2010,46(24):156-161.
[7]钱萍，陈文华，高亮，等. 航天电连接器综合应力可靠性统计模型的验证[J].中国机械工程,2011,22(3):257-261,273.
Qian P, Chen W H,Gao L,et al.Reliability Statistical Model Verification of Aerospace Electrical Connectors under Multiple Stresses[J].China Mechanical Engineering,2011,22(3):257-261,273.
[8]Karl V,Bury K.Statistical Models in Applied Science[M].New York:John Wiley & Sons,1975.
[9]Efron B,Tibshirani R.An Introduction to the Bootstrap[M].London:Chapman   & Hall,1993.
[10]Efron   B.Better Bootstrap Confidence Intervals[J].Journal of American   Statistical Association,1987(82):171-185.
[11]赵宇,杨军,马小兵.可靠性数据分析教程[M].北京:北京航空航天大学出版社,2009.
[12]Efron B.Bootstrap Methods[J].The Annuals   of   Statistics,1979,7(1):1-26.
[13]陈文华,李奇志,张为鄂.产品可靠性的bootstrap区间估计方法[J].机械工程学报,2003,39(6):106-109.
Chen Wenhua,Li Qizhi,Zhang,Weie.Method of Bootstrap Interval Estimation for Product Reliability[J].Chinese Journal of Mechanical Engineering,2003,39(6):106-109.
[14]普雷斯 W H,弗拉内里 B P,托科尔斯基 S A.数值方法大全[M].王璞，等译.兰州:兰州大学出版社,1991.
[15]张杰,王海清,李玉明,等.基于主观估计法和FMEDA的失效数据分析及应用[J].计算机工程与应用,2013,49(16):255-259.
Zhang Jie,Wang Haiqing,Li Yuming,et al.Failure Data Analysis Based on Subjective Estimation and FMEDA and Application[J].Computer Engineering and Applications,2013,49(16):255-259.
[16]陈文华.航天电连接器可靠性试验和分析的研究[D].杭州:浙江大学,1997.
[17]Rausand M.System Reliability Theory:Models,Statistical Methods,and Applications[M].北京:国防工业出版社,2010.
[18]庄楚强,何春雄.应用数理统计基础[M].广州:华南理工大学出版社,2006.
[19]贾希胜.以可靠性为中心的维修决策模型[M].北京:国防工业出版社,2001.