切向载荷下螺栓结合部静特性分析及试验

中国机械工程 ›› 2015, Vol. 26 ›› Issue (7): 892-898.

切向载荷下螺栓结合部静特性分析及试验

惠烨1,2;黄玉美1;李艳1

1.西安理工大学教育部数控机床及机械制造装备集成重点实验室，西安，710048
2.陕西科技大学，西安，710021

出版日期:2015-04-10 发布日期:2015-04-24
基金资助:
国家高技术研究发展计划(863计划)资助项目(2012AA040701)；陕西省自然科学基金资助项目（2013JM7014,2014JM7275）

Theoretical Analysis and Test on Static Characteristics of Bolt Joints under Tangential Load

Hui Ye1,2;Huang Yumei1;Li Yan1

1.Key Laboratory of NC Machine Tools and Manufacture Equipment Integrated of the Educational Ministry,Xi'an University of Technology, Xi'an, 710048
2.Shaanxi University of Science&Technology,Xi'an,710021

Online:2015-04-10 Published:2015-04-24
Supported by:
National High-tech R&D Program of China (863 Program) （No. 2012AA040701）;Shanxi Provincial Natural Science Foundation of China（No.2013JM7014,2014JM7275）

摘要/Abstract

摘要：

为了准确理解螺栓结合部静态特性，基于结合面基础特性建立了螺栓单元结合面解析数学模型，提出了一种等效分步载荷解析算法，可以实现在结合部承受切向载荷时，无需考虑载荷间耦合关系就能对结合部力平衡非线性隐含积分方程组进行快速准确求解。采用自行设计的螺栓结合部切向加载装置进行了结合部扭转和剪切加载试验。试验与解析结果均表明，在切向载荷不超过最大静摩擦力的情况下，螺栓结合面切向变形与外载荷成线性关系。解析与试验结果的一致性验证了模型的正确性，为机械结合面静态特性分析提供了理论和试验支持，求解算法可方便地将结合面研究成果应用于工程实践。

关键词: 螺栓结合部, 静特性, 切向载荷, 分步计算

Abstract:

To observe the static performance of bolt joints accurately, an analytic mathematical model of bolt unit interfacing was established based on joint interfaces basic characteristic parameters. A multi-stage equivalent load analyzing algorithm was proposed to solve non-linear implicit integration equations quickly and correctly when tangential load was applied to the joints, not considering the coupling relation among loads. Torsional and tangent loading tests were conducted using self-designed bolt joint tangent loading device. The results of the tests and analyses indicate that when tangential load does not exceed the maximum static friction, the results reveal a linear relation between joint interface tangential deformation and external load. The consistence between the analysis and test results validates the correctness of analytic model, which provides theoretical and test evidence for investigating static performance of mechanical interface, and the analyzing algorithm makes it easy to apply the joint interface research fruits to engineering practice.

Key words: bolt joint, static characteristic, tangential load, multi-stage algorithm

中图分类号:

TG50

惠烨, 黄玉美, 李艳. 切向载荷下螺栓结合部静特性分析及试验[J]. 中国机械工程, 2015, 26(7): 892-898.

Hui Ye, Huang Yumei, Li Yan. Theoretical Analysis and Test on Static Characteristics of Bolt Joints under Tangential Load[J]. China Mechanical Engineering, 2015, 26(7): 892-898.

参考文献

[1]田红亮，刘芙蓉，方子帆，等.结合部静摩擦因数修正与定量实验验证[J].农业机械学报，2013，44(10)：282-292.
Tian Hongliang，Liu Furong，Fang Zifan，et al.Correction of Static Friction Coefficient for Joint Interface and Quantitative Test Confirmation[J].Transactions of the Chinese Society for Agricultural Machinery，2013，44(10)：282-292.
[2]赵宏林，丁庆新，曾鸣. 机床结合部特性的理论解析及应用[J]. 机械工程学报，2008，44(12)：208-214.
Zhao Honglin，Ding Qingxin，Zeng Ming，et al.Theoretic Analysis on and Application of Behaviors of Machine Tool Joints[J]. Journal of Mechanical Engineering，2008，44(12)：208-214.
[3]Lin Y，Chen W.A Method of Identifying Interface Characteristic for Machine Tools Design[J].Journal of Sound and Vibration，2002，255：481-487.
[4]Fu Weiping，Huang Yumei，Zhang Xueliang，et al.Experimental Investigation of Dynamic Normal Characteristics of Machined Joint Surfaces[J]. ASME Journal of Vibration and Acoustics，2000，122(4)：393-398.
[5]田红亮，钟先友，秦红玲，等. 依据各向异性分形几何理论的固定结合部法向接触力学模型[J].机械工程学报，2013，49(21)：108-121.
Tian Hongliang，Zhong Xianyou，Qin Hongling，et al.Normal Contact Mechanics Model of Fixed Joint Interface Adopting Anisotropic Fractal Geometrical Theory[J].Journal of Mechanical Engineering，2013，49(21)：108-121.
[6]Meng A D.Optical Control of Fastener Clamp Load in Bolt Joints[D].Rochester：Oakland University, 2008.
[7]黄玉美,惠烨,杨新刚，等.螺栓结合面单元全载荷静特性试验装置及试验方法:中国, ZL201010236266.8[P]. 2010-11-17.
[8]杨国庆，王飞，洪军，等. 螺栓连接被连接件刚度理论计算方法研究[J].西安交通大学学报，2012，46（7）：50-56.
Yang Guoqing，Wang Fei,Hong Jun，et al.Theoretical Analysis for Bolted Member Stiffness[J].Journal of Xi’an Jiaotong University, 2012，46(7)：50-56.
[9]张学良，黄玉美，韩颖.基于接触分形理论的机械结合面法向接触刚度模型[J].中国机械工程，2000，11(7)：727-729.
Zhang Xueliang，Huang Yumei，Han Ying. Fractal Model of the Normal Contact Stiffness of Machine Jointsurfaces Based on the Fractal Contact Theory[J].China Mechanical Engineering，2000，11(7)：727-729.
[10]张学良，黄玉美，温淑华.结合面接触刚度分形模型研究[J].农业机械学报，2000，31(4)：89-91.
Zhang Xueliang，Huang Yumei，Wen Shuhua.Fractal Model of Contact Stiffness of Joint Surfaces[J].Transactions of the Chinese Society for Agricultural Machinery，2000，31(4)：89-91.
[11]张学良，丁红钦，兰国生.基于分形理论的结合面法向接触阻尼与损耗因子模型[J].农业机械学报，2013，44(6)：288-294.
Zhang Xueliang,Ding Hongqin,Lan Guosheng,et al.Normal Contact Damping and Dissipation Factor Model of Joint Interfaces Based on Fractal Theory[J].Transactions of the Chinese Society for Agricultural Machinery，2013，44(6)：288-294.
[12]Pau M,Baldi A,Leban B.Visualization of Contact Areas in Bolted Joints Using Ultrasonic Wave[J].Experimental Techniques，2008，32(4)：49-53.
[13]Marshall M B, Lewis R, Dwyer-Joyce R S.Characterization of Contact Pressure Distribution in Bolted Joints[J].Strain，2006，42：31-43.
[14]Medina S，Nowell D,Dini D.Analytical and Numerical Models for Tangential Stiffness of Rough Elastic Contacts[J].Tribology Letters January，2013, 49（1）：103-115.
[15]Campaá C, Persson B N, Müser M H.Transverse and Normal Interfacial Stiffness of Solids with Randomly Rough Surfaces[J]. Journal of Physics: Condensed Matter，2011，23(8)：085001.
[16]Zhang Guangpeng，Huang Yumei，Shi Wenhao，et al.Predicting Dynamic Behavior of a Whole Machine Tool Structure Based on Computer-aided Engineering[J].International Journal of Machine Tools and Manufacture，2003，43：699-706.
[17]Ito Y, Masuko M.Experimental Study on the Optimum Interface Pressure on a Bolted Joint Considering the Damping Capacity[C]//Proceedings of the 12th International Conference on Machine Tool Design and Research.Birmingham，1972:97-105.
[18]Sherif H A, Kossa S S.Relationship between Normal and Tangential Contact Stiffness of Nominally Flat Surfaces[J]. Wear, 1991, 151(1)：49-62.