一种适于柔性RFID标签生产的微胶滴检测算法

中国机械工程 ›› 2015, Vol. 26 ›› Issue (6): 789-793.

一种适于柔性RFID标签生产的微胶滴检测算法

陈建魁;郭熙乾;尹周平;黄永安

华中科技大学数字制造装备与技术国家重点实验室,武汉,430074

出版日期:2015-03-25 发布日期:2015-03-24
基金资助:
国家自然科学基金资助项目（51322507,51475195)

A Detection Algorithm of Micro Adhesive Drops for Manufacturing of Flexible RFID Tags

Chen Jiankui;Guo Xiqian;Yin Zhouping;Huang Yong'an

State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan,430074

Online:2015-03-25 Published:2015-03-24
Supported by:
National Natural Science Foundation of China（No. 51322507,51475195）

摘要/Abstract

摘要：

根据柔性射频识别（RFID）标签批量生产装备对点胶质量严格控制的需求，提出了一种基于胶滴二维图像信息的点胶质量在线检测算法。该算法通过差分、滤波去噪和Blob分析等图像处理过程所得的胶滴图像获取胶滴二维信息，再依据胶滴的面积等参量对点胶质量进行评价。对不同基板和点胶量柔性RFID标签生产进行实际测试实验,实验结果显示,该算法适应性较好、胶滴尺寸波动较小，可对点胶一致性作出定量评价与分析。

关键词: 柔性RFID标签, 胶滴检测, 质量评价, 点胶一致性

Abstract:

Based on the dispensing quality control of flexible RFID tags' manufacturing equipment, a on-line detection algorithm of micro adhesive drops was proposed. The image processing courses, including image differencing, filtering and noise reduction, and Blob analysis, were integrated to get the two-dimensional information of the drops, and the area will be used to evaluate the dispensing quality. The data gathered from the actual production tests, presents that the algorithm has good adaptation and stability, and suffices the RFID packaging equipment.

Key words: flexible radio frequency identification(RFID) tag;adhesive drop , detection;quality evaluation;dispensing consistency

中图分类号:

TP27

陈建魁, 郭熙乾, 尹周平, 黄永安. 一种适于柔性RFID标签生产的微胶滴检测算法[J]. 中国机械工程, 2015, 26(6): 789-793.

Chen Jiankui, Guo Xiqian, Yin Zhouping, Huang Yong'an. A Detection Algorithm of Micro Adhesive Drops for Manufacturing of Flexible RFID Tags[J]. China Mechanical Engineering, 2015, 26(6): 789-793.

参考文献

[1]Rogers J A,Someya T, Huang Y G. Materials and Mechanics for Stretchable Electronics[J]. Science,2010,327:1603-1607.
[2]Reuss R H, Chalamala B R, Moussessian A, et al. Macroelectronics: Perspectives on Technology and Applications[J]. Proceedings of the IEEE, 2005, 93(7):1239-1256.
[3]Zhao Yixiang, Li Hanxiong, Ding Han, et al. Integrated Mode-ling of Time-pressure Fluid Dispensing for Electronics Manufacturing[J]. International Journal of Advanced Manufacturing Technology, 2005,26(1/2):1-9.
[4]孙道恒,高俊川,杜江,等. 微电子封装点胶技术的研究进展[J].中国机械工程,2011,22(20):2513-2519.
Sun Daoheng, Gao Junchuan, Du Jiang, et al. Advances in Fluid Dispensing Technology for Micro-electronics Packaging[J]. China Mechanical Engineering, 2011,22(20):2513-2519.
[5]陈从平, 方子帆, 秦武, 等. 基于单幅灰度图像的微胶点体积测量[J].计算机测量与控制,2010,18（10):2238-2240.
Chen Congping, Fang Zifan, Qin Wu, et al. Measuring Micro Adhesive Dot Volume Based on Single Gray Image[J].Computer Measurement & Control,2010,18（10）:2238-2240.
[6]陈建魁，尹周平，熊有伦.一种基于位置同步的非连续卷绕进给方法[J].中国机械工程,2010,21(14):1639-1642.
Chen Jiankui,Yin Zhouping,Xiong Youlun.A Conveyance Method for Discontinuous Winding Processes Based on Synchronous Position Control [J]. China Mechanical Engineering,2010,21(14):1639-1642.
[7]隋婧,金伟其.双目立体视觉技术的实现及其进展[J].电子技术应用,2004,30(10):4-6.
Duo Jing,Jin Weiqi.Advances and Realizations of Binocular Stereo Vision Technology[J].Application of Electronic Technique, 2004, 30(10): 4-6.
[8]Murugas T,Peplow R, Tapamo J R.Video Object Extraction[C]//Proceedings of the 3rd International Symposium on Image and Signal Processing and Analysis. Paris,2003:599-604.
[9]Farid H.Blind Inverse Gamma Correction[J].IEEE Transaction on Image Processing, 2001,10:1428-1433.