初始安装应力对管道固有频率的影响分析及试验验证

中国机械工程 ›› 2015, Vol. 26 ›› Issue (4): 512-517.

初始安装应力对管道固有频率的影响分析及试验验证

程小勇1;陈果1;刘明华2;郑其辉2;罗云2;侯民利2;蒲柳2

1.南京航空航天大学,南京,210016
2.成都飞机工业(集团)有限责任公司,成都,610092

出版日期:2015-02-25 发布日期:2015-02-25
基金资助:
国家自然科学基金资助项目（61179057);成都飞机工业（集团）有限责任公司资助项目

Analysis and Experimental Verification to Effects of Pipe Initial Installation Stress on Pipe's Natural Frequencies

Cheng Xiaoyong1;Chen Guo1;Liu Minghua2;Zheng Qihui2;Luo Yun2;Hou Minli2;Pu Liu2

1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Chengdu Aircraft Industrial (Group) Co., Ltd.,Chengdu,610092

Online:2015-02-25 Published:2015-02-25
Supported by:
National Natural Science Foundation of China（No. 61179057）

摘要/Abstract

摘要：

研究了初始安装应力对管道固有频率的影响。利用ANSYS对导管无安装应力、较小安装应力、较大安装应力的情况进行仿真分析,研究了安装应力对管道固有频率的影响;构建液压管道试验台,模拟了初始安装应力,利用锤击法对导管进行模态试验,验证了安装应力对管道固有频率的影响规律;利用锤击法对某型飞机液压管道进行了固有频率测试,试验结果进一步表明,管道安装应力的存在对管道模态频率有一定影响。研究结果为进一步开发管道安装应力监测系统提供了方法和思路。

关键词: 管道, 安装应力, 有限元分析；固有频率, 模态试验

Abstract:

This paper investigated the effects of the pipe initial installation stress on pipe's natural frequencies.Simulation analyses on catheter-free assembling stress, smaller installation stress,larger installation stress were carried out by using ANSYS in order to find the effects of the pipe initial installation stress on pipe's natural frequencies. Then a pipeline test-bed was constructed, which was simulated the initial installation stress. The experimental modal test analysis was conducted on the pipe through the hammer method, and the results were compared with those calculated by ANSYS. Finally, modal test on the aircraft pipe was completed, and the results show that initial installation stress have certain influence on pipe's natural frequencies, which provides important methods and ideas for the future study of monitoring system for pipe installation stress.

Key words: pipe, installation stress, finite element analysis, natural frequency, modal test

中图分类号:

TH113

程小勇, 陈果, 刘明华, 郑其辉, 罗云, 侯民利, 蒲柳. 初始安装应力对管道固有频率的影响分析及试验验证[J]. 中国机械工程, 2015, 26(4): 512-517.

Cheng Xiaoyong, Chen Guo, Liu Minghua, Zheng Qihui, Luo Yun, Hou Minli, Pu Liu. Analysis and Experimental Verification to Effects of Pipe Initial Installation Stress on Pipe's Natural Frequencies[J]. China Mechanical Engineering, 2015, 26(4): 512-517.

参考文献

[1]张洪武,廖爱华，吴昌华.压气机过盈配合的弹塑性有摩擦接触的研究[J].工程力学,2007,24(1):186-192.
Zhang Hongwu,Liao Aihua,Wu Changhua.Study on Elastoplastic Frictional Contact Problem in Interference Fits of Compressors[J]. Engineering Mechanics,2007,24(1):186-192.
[2]傅国如,陈荣,吕凤军,等.发动机燃油供油导管断裂失效分析[J].失效分析与预防,2007,2(1)：29-33.
Fu Guoru,Chen Rong,Lü Fengjun,et al.Fracture Failure   Analysis of a Fuel Pipe in an Aero-engines[J].Failure Analysis and Prevention, 2007,2(1)：29-33.
[3]王晶,陈果,郑其辉,等.飞机液压管道初始装配应力仿真[J].航空计算技术,2012,42(6)：54-57.
Wang Jin,Chen Guo,Zheng Qihui,et al.Simulation of Initial Assembly Stress for Aircraft Hydraulic Pipeline[J].Aeronautical Computing Technique, 2012, 42(6)：54-57.
[4]李青，佟文伟，韩振宇.某型航空发动机引接管断裂故障分析[J].航空发动机，2012，38(1)： 60-62.
Li Qing, Tong Wenwei, Han Zhenyu. Fracture Failure Analysis of Anti-surge Pipe for an Aeroengine[J]. Aeroengine, 2012,38(1)： 60-62.
[5]Zhao H,Lz H, Kuallgz B.The Virtual Contact Loading Method for Elastic Ccontact Problems[J]. Communication in Numerical Methods in Engineering,1993,9:455-461.
[6]Frederic L,Aurelian V,Bernard S.Finite Element Analysis and Contact Modeling Considerations of Interference Fits for   Fretting Fatigue Strength Calculations[J].Simulation Modeling Practice & Theory, 2009, 17(10):1587-1602.
[7]戚刚,吴昌华,张南林.增压器涡轮叶片和轮盘组装结构的三维接触精细有限元分析[J].中国造船,2000,41(3):69-73.
Qi Gang,Wu Changhua,Zhang Nanlin.Precise Analysis of 3-Dimensional Elastic Contact of Tenon and Mortise Joint in   Turbine[J]. Shipbuilding of China, 2000,41(3):69-73.
[8]刘晗.应变电测技术在状态测试与评估中的应用研究[J].宝钢技术,2004,15(3):27-34.
Liu Han. Application of Strain Electrical Measurement Technology in Conditional Test and Evaluation[J].Baosteel Technology, 2004,15(3):27-34.
[9]邹晓军.梁桥结构损伤识别的曲率模态技术[D].武汉:武汉理工大学,2003.

[1]	刘锋, 李吉泉, 彭翔, 姜少飞. [成形过程仿真优化与集成计算材料工程]限定加热管布局的快速热循环注塑成形模具电加热系统优化[J]. 中国机械工程, 2020, 31(22): 2699-2707.
[2]	刘大伟1，2；刘佳佳1. 面向管道机器人的非对称惯性驱动系统及其动力学特性[J]. 中国机械工程, 2020, 31(18): 2189-2195，2205.
[3]	范志超, 陈学东, 董杰, 艾志斌. [工程应用]我国危化品承压设备防灾减灾技术进展[J]. 中国机械工程, 2020, 31(02): 237-245.
[4]	尤波;邹宇;许家忠. 玻璃钢管道相贯线机器人铣削轨迹规划[J]. 中国机械工程, 2018, 29(24): 2980-2987.
[5]	张丽攀1;马冰洋1;宋凯1;王振2 . 励磁作用下铁磁管道缺陷磁特性仿真[J]. 中国机械工程, 2018, 29(16): 2003-2009.
[6]	张永顺1,2;姜万录1;苏晓1;雷亚飞1. 二通插装阀非线性动力学行为[J]. 中国机械工程, 2018, 29(10): 1159-1165.
[7]	闫宏伟;焦彪彪;马建强;崔子梓;汪洋. 一种管道机器人的自适应主动螺旋式驱动机理分析[J]. 中国机械工程, 2018, 29(01): 21-29.
[8]	蔡海潮1;徐春广2;王东峰3;尚振东1. 管道内压力对纵模导波传播特性的影响[J]. 中国机械工程, 2017, 28(23): 2779-2784.
[9]	陈剑;戎芳明. 货车转向系统结构振动特性测试与优化[J]. 中国机械工程, 2017, 28(20): 2463-2466,2492.
[10]	孙灵芳, 徐曼菲, 朴亨, 李霞. 基于流固耦合的换热管道污垢超声回波检测数值模拟与实验[J]. 中国机械工程, 2017, 28(03): 340-348.
[11]	陈永亮, 刘德帅, 刘玉坤, 彭涛. 基于反演识别法的有限元模型校正[J]. 中国机械工程, 2016, 27(21): 2949-2955.
[12]	王合旭, 蒋彦龙, 施红, 韩建军. 飞机空气导管泄漏特性的试验研究及数值模拟[J]. 中国机械工程, 2015, 26(9): 1183-1188.
[13]	赖奇暐, 巫世晶, 张增磊, 胡基才. 基于AMESim的特高压断路器管道系统压力波动[J]. 中国机械工程, 2015, 26(7): 859-863.
[14]	李辉, 刘力萌, 赵少魁, 于菲, 檀润华. 面向机械产品专利规避的功能裁剪路径研究[J]. 中国机械工程, 2015, 26(19): 2581-2589.
[15]	黄震, 赵威. 高频响测力仪固有频率的理论分析与试验[J]. 中国机械工程, 2015, 26(1): 7-11.