基于瑞利分布的平面磨削温度场的仿真研究

摘要/Abstract

摘要：

考虑磨粒在砂轮表面随机分布对接触区热流密度分布的影响，基于未变形磨屑厚度的瑞利分布理论，假定流入工件的热流密度呈瑞利分布，建立了瑞利分布热源模型。采用基于有限元法的瑞利分布热源模型对典型磨削工况进行仿真计算,将计算结果与矩形分布及三角形分布仿真结果进行对比，系统地分析了热源模型、磨削液对温度场的影响规律。结合磨削实验测量值，发现基于瑞利分布的热源模型仿真结果与实验测量值吻合较好。

关键词: 热源模型, 磨削温度场, 有限元仿真, 磨削液

Abstract:

On the basis of Rayleigh's probability density function of undeformed chip thickness and considering the influences of grain tips'randomness on the heat flux,the heat flux entering the workpiece was assumed to have a Rayleigh distribution, a Rayleigh distribution heat source model was developed to evaluate the temperature field in surface grinding. The FEM simulation for some typical grinding conditions were carried out by using the Rayleigh distribution heat source model, the simulation results were compared with those obtained from triangle heat source model and rectangle heat source model, the influences of heat source model and grinding fluid on the temperature field were investigated. By comparing with experimental results, a good agreement is found between the FEM results obtained from Rayleigh distribution heat source model and experimental results.

Key words: heat source model, grinding temperature field, finite element simulation, grinding fluid

中图分类号:

TG580.14

王艳, 谢建华, 刘建国, 张省. 基于瑞利分布的平面磨削温度场的仿真研究[J]. 中国机械工程, 2015, 26(4): 484-490.

Wang Yan, Xie Jianhua, Liu Jianguo, Zhang Sheng. Research on Finite Element Simulation of Temperature Field Based on Rayleigh Distribution in Surface Grinding[J]. China Mechanical Engineering, 2015, 26(4): 484-490.

参考文献

[1]Tahvilian A M, Liu Zhaoheng, Champliaud H, et al. Experimental and Finite Element Analysis of Temperature and Energy Partition to the Workpiece While Grinding with a Flexible Robot[J]. Journal of Materials Processing Technology, 2013, 213(12): 2292-2303.
[2]Marinescu I D, Rowe W B, Dimitrov B，et al.Tribology of Abrasive Machining Processes[M]. Norwich：William Andrew Publishing, 2004.
[3]Fang Congfu,Xu Xipeng. Analysis of Temperature Distributions in Surface Grinding with Intermittent Wheels[J]. The International Journal of Advanced Manufacturing Technology,2014,71(1/4):23-31.
[4]毛聪,周志雄,周德旺,等. 平面磨削温度场三维数值仿真的研究[J]. 中国机械工程,2009,20(5):589-595.
Mao Cong, Zhou Zhixiong, Zhou Dewang,et al. Research on Three Dimensional Finite Element Simulation of the Temperature Field in Surface Grinding[J].China Mechanical Engineering, 2009,20(5):589-595.
[5]Jaeger J C.Moving Sources of Heat and the Temperature at Sliding Contacts[J]. Proc of the Royal Society of New South Wales, 1942,76:203-224.
[6]李伯民,赵波. 现代磨削技术[M]. 北京：机械工业出版社,2003.
[7]杨世铭,陶文铨. 传热学[M]. 北京：高等教育出版社,2006.
[8]Hahn R S.On the Nature of the Grinding Process[C]//Proceedings of 3rd Internatinal MachineTool Design and Research Conference.Birmingham,England, 1962:129-154.
[9]Pavel R, Srivastava A. An Experimental Investigation of Temperatures during Conventional and CBN Grinding[J]. The International Journal of Advanced Manufacturing Technology,2007,33(3):412-418.
[10]Agarwal S, Rao P V. Predictive Modeling of Force and Power Based on a New Analytical Undeformed Chip Thickness Model in Ceramic Grinding[J]. International Journal of Machine Tools and Manufacture,2013,65:68-78.
[11]Agarwal S, Rao P V. Predictive Modeling of Undeformed Chip Thickness in Ceramic Grinding[J]. International Journal of Machine Tools and Manufacture,2012,56:59-68.
[12]Rowe W B. Thermal Analysis of High Efficiency Deep Grinding[J]. International Journal of Machine Tools and Manufacture, 2001, 41(1):1-19.
[13]JinTan,Rowe W B,McCormack D. Temperatures in Deep Grinding of Finite Workpieces[J]. International Journal of Machine Tools and Manufacture,2001,42(1):53-59.
[14]Jin Tan, Stephenson D J, Rowe W B. Estimation of the Convection Heat Transfer Coefficient of Coolant Within the Grinding Zone[J]. Journal of Engineering Manufacture, 2003,217:397-407.

[1]	许鹏, 曾泓茗, 朱晨露, 王平, 耿明, 许勇. [车辆工程与测控]基于增强磁场涡流的高速轨道缺陷检测方法[J]. 中国机械工程, 2021, 32(04): 454-459,466.
[2]	岳彩旭;刘鑫;刘智博;谢娜;王彦武. 基于有限元仿真的拼接模具铣削用刀具优化[J]. 中国机械工程, 2020, 31(17): 2085-2094.
[3]	高成;张芮;黄姣英 ;赵冬. 高温环境下电连接器内部温度有限元仿真分析及试验[J]. 中国机械工程, 2019, 30(15): 1867-1872.
[4]	崔国华1;刘健1;马良2;崔康康1. 混凝土管端口打磨机器人设计及力学性能分析[J]. 中国机械工程, 2019, 30(06): 665-671.
[5]	于辉, 邹海贝, 李伟, 翟建伟, 刘利刚, . [表面强化及损伤机理]基于结构整体性评估程序和失效评定图方法的含裂纹缺陷钢轨安全性评定[J]. 中国机械工程, 2019, 30(03): 271-278.
[6]	李成洋. [养护维修装备]采用有限元法的捣固、稳定、测量一体化仿真车设计[J]. 中国机械工程, 2019, 30(03): 359-364.
[7]	李伦1，2;赵德阳1，2;李济顺1，2，3;薛玉君2;邹声勇3;马伟1，2;杨少东1，2. 弯曲钢丝绳股内钢丝张力变化仿真与实验[J]. 中国机械工程, 2018, 29(19): 2269-2276.
[8]	伍俏平1,2;王煜1;瞿为1;邓朝晖1,2. 在线电解修整磨削液研究现状及其展望[J]. 中国机械工程, 2017, 28(09): 1118-1125.
[9]	张修铭, 姜昂, 史小亮, 修世超. 磨削液供给参数对工件表面完整性的影响[J]. 中国机械工程, 2017, 28(04): 456-461.
[10]	易仁慧;周祖德;刘明尧;季冬亮. 表面粘贴式光纤光栅传感器的动应变传递规律[J]. 中国机械工程, 2016, 27(24): 3362-3367.
[11]	任志英, 高诚辉, 陈为平, 林有希. 光学镜片亚表面损伤形成数值模拟与分析[J]. 中国机械工程, 2016, 27(19): 2675-2681.
[12]	邹广平, 刘泽, 刘松, 程贺章. 金属橡胶减振器随机振动有限元仿真[J]. 中国机械工程, 2016, 27(14): 1960-1963,1981.
[13]	李琳, 张峰榕, 陶建峰, 刘成良. 基于断裂力学的TBM撑靴液压缸O形圈断裂分析[J]. 中国机械工程, 2016, 27(12): 1563-1567.
[14]	高立超, 许立忠, 李冲. 单级放大机电集成压电谐波电机设计与仿真分析[J]. 中国机械工程, 2016, 27(10): 1287-1293.
[15]	刘泽祥, 康敏, 李曙生. 旋转超声电解复合加工小孔流场仿真[J]. 中国机械工程, 2016, 27(06): 748-753.