考虑滚柱节圆偏移的反向式行星滚柱丝杠副运动学分析

中国机械工程 ›› 2014, Vol. 25 ›› Issue (11): 1421-1426.

考虑滚柱节圆偏移的反向式行星滚柱丝杠副运动学分析

马尚君;刘更;佟瑞庭;张文杰

西北工业大学,西安,710072

出版日期:2014-06-10 发布日期:2014-06-23
基金资助:
国家自然科学基金资助项目(51275423，50975232)；高等学校博士学科点专项科研基金资助项目(20126102110019)；高等学校学科创新引智计划(B13044)

Kinematic Analysis of an Inverted Planetary Roller Screw Considering Roller Pitch Circle Mismatch

Ma Shangjun;Liu Geng;Tong Ruiting;Zhang Wenjie

Northwestern Polytechnical University,Xi'an,710072

Online:2014-06-10 Published:2014-06-23
Supported by:
National Natural Science Foundation of China（No. 51275423，50975232）;Research Fund for the Doctoral Program of Higher Education of China（No. 20126102110019）

摘要/Abstract

摘要：

以反向式行星滚柱丝杠副为研究对象,对因滚柱螺纹节圆与滚柱齿节圆产生偏移而导致的滚柱和丝杠发生相对滑动和相对轴向位移的问题进行了研究。首先建立了滑动角、滚柱相对丝杠轴向位移和各部件相对滑动速度运动学分析的模型,着重分析了滚柱位移对整个机构导程和滑动速度的影响;再以某一反向式行星滚柱丝杠副为例,计算了由接触变形引起的节圆偏移量,并采用该模型分别计算了滚柱相对丝杠的轴向位移和滑动速度。研究结果表明：滚柱轴向位移不会影响系统导程;螺母-滚柱侧必然存在轴向滑动;减小节圆偏移量能有效降低丝杠-滚柱侧滑动速度。

关键词: 反向式行星滚柱丝杠副, 节圆偏移, 轴向位移, 滑动速度

Abstract:

Taking an inverted planetary roller screw as the research object, the kinematic models were developed to investigate axial displacement and slip velocity of the roller relative to the screw, which was caused by a pitch circle mismatch between the roller thread and the roller gear. First, the calculation formulas of the angle of slip, axial displacement and slip velocity of the roller relative to the screw were presented, and the effects of roller displacement on the overall lead and slip velocity of the mechanism were analyzed. Then, an inverted planetary roller screw was selected as an example, and the pitch circle mismatch values due to contact deformation were derived. Furthermore, the axial displacement and slip velocity of the roller relative to the screw were calculated by using the formulas respectively. The results show that the roller displacement does not affect the lead of the overall system, the slip must occur at the nut-roller interface, and slip velocity is decreased by decreasing the pitch mismatch values at the screw-roller interface effectively.

Key words: inverted planetary roller screw, pitch circle mismatch, axial displacement, slip velocity

中图分类号:

TH132.1

马尚君, 刘更, 佟瑞庭, 张文杰. 考虑滚柱节圆偏移的反向式行星滚柱丝杠副运动学分析[J]. 中国机械工程, 2014, 25(11): 1421-1426.

Ma Shangjun, Liu Geng, Tong Ruiting, Zhang Wenjie. Kinematic Analysis of an Inverted Planetary Roller Screw Considering Roller Pitch Circle Mismatch[J]. China Mechanical Engineering, 2014, 25(11): 1421-1426.

参考文献

[1]刘更, 马尚君, 佟瑞庭, 等. 行星滚柱丝杠副的新发展及关键技术[J]. 机械传动, 2012, 36(5): 103-108.
Liu Geng, Ma Shangjun, Tong Ruiting, et al.New Development and Key Technologies of Planetary Roller Screw[J]. Journal of Mechanical Transmission, 2012, 36(5):103-108.
[2]Claeyssen F, Jnker P, Leletty R, et al. New Actuators for Aircraft, Space and Military Applications[C]//12th International Conference on New Actuators.Bremen, 2010: 324-330.
[3]Ohashi Y, Andrade A D, Nosé Y. Hemolysis in an Electromechanical Driven Pulsatile Total Artificial Heart [J]. Artificial Organs, 2003, 27(12): 1089-1093.
[4]Brandenburg G, Brückl S, Dormann J, et al. Comparative Investigation of Rotary and Linear Motor Feed Drive Systems for High Precision Machine Tools[C]//Proceedings of the Sixth International Workshop on Advanced Motion Control. Nagoya, 2000: 384-389.
[5]Strandgren C B. Roller Screw: US, 3182522[P]. 1965-05-11.
[6]Erhart T A. Linear Actuator with Feedback Position Sensor Device: US, 5557154[P]. 1996-09-17.
[7]Velinsky S A,Chu B, Lasky T A. Kinematics and Efficiency Analysis of the Planetary Roller Screw Mechanism[J]. Journal of Mechanical Design, ASME, 2009, 131(1): 011016-8.
[8]Tselishchev A S, Zharov I S. ElasticElements in Roller-screw Mechanisms[J]. Journal of Russian Engineering Research, 2008, 28(11): 1040-1043.
[9]Hojjat Y, Agheli M M. A Comprehensive Study on Capabilities and Limitations of Roller-screw with Emphasis on Slip Tendency[J]. Mechanism and Machine Theory, 2009, 44(10):1887-1899.
[10]Jones M H, Velinsky S A. Kinematics of Roller Migration in the Planetary Roller Screw Mechanism[J]. Journal of Mechanical Design, ASME, 2012, 134(6): 061006-6.
[11]Zhang X C, Liu G, Ma S J, et al. Study on Axial Contact Deformation of Planetary Roller Screw[J]. Applied Mechanics and Materials, 2012, 155/156: 779-783.
[12]杨家军, 韦振兴, 朱继生, 等. 行星滚柱丝杠副载荷分布及刚度计算[J].华中科技大学学报(自然科学版), 2011, 39(4): 1-4.
Yang Jiajun, Wei Zhenxing, Zhu Jisheng, et al. Calculation of Load Distribution of Planetary Roller Screws and Static Rigidity[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011, 39(4):1-4.
[13]韦振兴. 行星滚柱丝杠副刚度及效率的分析与研究[D]. 武汉: 华中科技大学, 2011.
[14]Moog. Electric Linear Servo Actuators, Moog Group.[2011-09-21].http://www.moog.com/industrial.
[15]Exlar. Electric Servo Actuators, Exlar Group.[2011-09-21]. http://www.exlar.com.
[16]陈芳. 两级行星滚柱丝杠传动设计与精确度研究[D]. 南京: 南京理工大学, 2009.