机载光电吊舱橡胶减振器的设计与应用

中国机械工程 ›› 2014, Vol. 25 ›› Issue (10): 1308-1312.

机载光电吊舱橡胶减振器的设计与应用

刘家燕1;程志峰1;王平1,2

1.中国科学院长春光学精密机械与物理研究所,长春,130033
2.长春理工大学,长春,130022

出版日期:2014-05-25 发布日期:2014-05-27
基金资助:
国家高技术研究发展计划(863计划)资助项目(2008AA121803)

Design and Applications of Rubber Shock Absorber in Airborne Photoelectric Pod

Liu Jiayan1;Cheng Zhifeng1;Wang Ping1,2

1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun,130033
2.Chang Chun University of Science and Technology,Changchun,130022

Online:2014-05-25 Published:2014-05-27
Supported by:
National High-tech R&D Program of China (863 Program) （No. 2008AA121803）

摘要/Abstract

摘要：

为了保护光电吊舱的内部光学载荷,减小振动对机载光电吊舱成像质量和稳定精度的影响,设计了一种用于载荷内框架安装的橡胶减振器。依据橡胶减振原理,对橡胶减振器进行了形状设计和参数计算。所设计的超薄型橡胶减振器，安装后仅使吊舱内部光学载荷相对内框架距离比安装前增大1mm。试验结果表明:振动强度测试值(加速度均方根值)明显减小,垂直方向由23.1g降至10.0g,水平方向由11.4g降至4.8g,有效地减小了振动对光学载荷的影响。光电吊舱在实际挂飞时,成像质量良好,跟踪精度满足技术指标要求。

关键词: 橡胶减振器, 光电吊舱, 光学载荷, 加速度均方根

Abstract:

In order to protect the internal optical load of photoelectric pod,reduce vibration influences on airborne photoelectric pod's imaging quality and the stable accuracy, a rubber shock absorber was designed for the load of internal frame installation. Based on rubber damping principles, the shape of rubber shock absorber was designed and the parameters were calculated. An ultrathin rubber shock absorber was developed,and the optical load of internal frame was hoisted 1mm after fitting the rubber shock absorber. The results of the related experiments show that:the vibration intensity test value—root mean square acceleration is much less:from 23.1g fells to 10.0g in vertical direction, from 11.4g fells to 4.8g in horizontal direction, the vibration influences on the optical load are reduced effectively. The photoelectric pod mounted on aerial vehicle is applied, imaging quality is fine,tracking precision meets the technical specifications.

Key words: rubber shock absorber, photoelectric pod, optical load, root mean square acceleration

中图分类号:

TH123

刘家燕, 程志峰, 王平, . 机载光电吊舱橡胶减振器的设计与应用[J]. 中国机械工程, 2014, 25(10): 1308-1312.

Liu Jiayan, Cheng Zhifeng, Wang Ping, . Design and Applications of Rubber Shock Absorber in Airborne Photoelectric Pod[J]. China Mechanical Engineering, 2014, 25(10): 1308-1312.

参考文献

[1]Yang H T,Cao J Z,Fan Z Y,et al.The Research of the High Precision Universal Stable Reconnaissance Platform in Near Space[J]. Proc.SPIE,2011,8196:111-116.
[2]Hadden S,Davis T,Buchele P,et al.Heavy Load Vibration Isolation System for Airborne Payloads[J].Proc. SPIE, 2001, 4332: 171-182.
[3]李玉龙,何忠波,白鸿柏,等.角振动对光学成像系统传递函数影响分析[J].中国机械工程,2012,23(15):1784-1788.
Li Yulong,He Zhongbo,Bai Hongbai,et al.Analysis of Influence of Angular Vibration on MTF in Optical Imaging Systems[J]. China Mechanical Engineering,2012,23(15):1784-1788.
[4]赵鹏,杨牧,张葆.航空机载光学设备的振动分析及座架减震器的设计[J].光学精密工程,1997,7(3):58-63.
Zhao Peng,Yang Mu,Zhang Bao. The Viberation Analysis and Damper Design of Optic Instrument in Flying Platform[J]. Optics and Precision Engineering,1997,7(3):58-63.
[5]刘树峰,白鸿柏,李玉龙,等.金属橡胶光电吊舱的减振器设计研究[J].新技术新工艺,2011(3):87-89.
Liu Shufeng, Bai Hongbai, Li Yulong, et al. Design and Analysis of Damper for Optoelectronic Pod[J]. New Technology & New Process,2011(3):87-89.
[6]李玉龙,何忠波,白鸿柏,等.无人机载光电平台无角位移减振器研究进展[J].航空制造技术,2011(18):78-85.
Li Yulong,He Zhongbo,Bai Hongbai,et al.Recent Dvance of Non-Angular Vibration Absorber for Opto-Electronic Platform of UAV[J]. Aeronautical Manufacturing Technology,2011(18):78-85.
[7]甘至宏.光电吊舱内框架减振系统设计[J].光学精密工程,2010,18(9):2036-2042.
Gan Zhihong. Design of Inner Frame Vibration Absorbing System for Optoelectronic Pod[J].Optics and Precision Engineering, 2010,18(9):2036-2042.
[8]朱石坚,楼京俊,何其伟,等.振动理论与隔振技术[M].2版.北京:国防工业出版社,2008.
[9]闻邦椿,刘树英,张纯宇.机械振动学[M].2版.北京:冶金工业出版社,2008.