面向生长型设计的制造信息模型

中国机械工程 ›› 2014, Vol. 25 ›› Issue (8): 1065-1070.

面向生长型设计的制造信息模型

杨金勇

中国矿业大学,徐州,221116

出版日期:2014-04-25 发布日期:2014-05-06
基金资助:
国家自然科学基金资助项目(51005236)

Manufacturing Information Model for Growth Design

Yang Jinyong

China University of Mining and Technology,Xuzhou,Jiangsu,221116

Online:2014-04-25 Published:2014-05-06
Supported by:
National Natural Science Foundation of China（No. 51005236）

摘要/Abstract

摘要：

针对生长型设计过程对功能表面分解粒度控制的需求,应用功能模式的几何特性表达了产品的几何结构信息,并以其为载体集成了产品制造过程信息,建立了基于功能表面的产品制造信息模型。利用信息熵理论对该模型信息进行了量化,将概念产品制造信息熵的最小值作为功能表面分解粒度的控制指标,来决定是否终止概念产品生长,并通过具体产品的设计验证了该模型的正确性。

关键词: 制造信息模型, 生长型设计, 功能表面, 功能模式

Abstract:

Aiming at the demands to control the decomposing granularity of function surface in the process of the growth design, function mode was used to express the product geometric structure information based on its geometric property, which was also used as the carrier to integrate product manufacturing process information. So the manufacturing information model was built based on function surface. The theory of information entropy was introduced to quantify the model information. The minimum value of conceptual product manufacturing information entropy was used as the control target of function surfaces decomposing granularity to determine whether to stop the growth of conceptual product or not. The correctness of the theory was verified through the specific product design experiments.

Key words: manufacturing information model, growth design, function surface, function mode

中图分类号:

TH122

杨金勇. 面向生长型设计的制造信息模型[J]. 中国机械工程, 2014, 25(8): 1065-1070.

Yang Jinyong. Manufacturing Information Model for Growth Design[J]. China Mechanical Engineering, 2014, 25(8): 1065-1070.

参考文献

[1]张建明,魏小鹏,滕弘飞.基于知识的机械产品概念设计启发式求解[J].中国机械工程,2006,17(13):1411-1416．
Zhang Jianming,Wei Xiaopeng,Teng Hongfei.A Knowledge-based Heuristic Approach to the Conceptual Design of Mechanical Products[J].China Mechanical Engineering,2006,17(13):1411-1416.
[2]孙守迁,包恩伟,陈蘅,等.计算机辅助概念设计研究现状和发展趋势[J].中国机械工程,1999,10(6):105-109.
Sun Shouqian,Bao Enwei,Chen Heng,et al.State of the Art of Research on Computer Aided Conceptual Design[J].China Mechanical Engineering,1999,10(6):105-109.
[3]杨金勇,黄克正,霍志璞.基于功能表面的生长型设计理论[J].机械工程学报,2008,44(4):29-35．
Yang Jinyong,Huang Kezheng,Huo Zhipu.Function Surface-based Growth Design Theory[J].Chinese Journal of Mechanical Engineering,2008,44(4):29-35.
[4]杨波,昃向博,杨涛,等.基于广义装配原理的产品生长型设计[J].中国机械工程,2006,17(增):1-6．
Yang Bo,Ze Xiangbo,Yang Tao,et al.Product Growth Design Based on Generalized Assembly Principle[J].China Mechanical Engineering,2006,17(S):1-6.
[5]杨波,昃向博,黄克正,等.基于产品基因分解重构的生长型设计[J].中国机械工程,2005,16(9):770-774．
Yang Bo,Ze Xiangbo,Huang Kezheng,et al.Incremental Growth Design Based on Decomposition and Reconstitution of Product Gene[J].China Mechanical Engineering,2005,16(9):770-774.
[6]曹树坤,黄克正.基于广义定位模式的实例推理[J].机械科学与技术,2003,22(6):879-881．
Cao Shukun,Huang Kezheng.Case-part Reasoning Technology Based on General-location Pattern[J].Mechanical Science and Technology,2003,22(6):879-881.
[7]陈洪武,黄克正,杨波.基于功能表面的产品结构设计自动化研究与实现[J].机械设计与研究,2004,20(3):24-27．
Chen Hongwu,Huang Kezheng,Yang Bo.Research and Implementation on Product Design Automation Based on Function Surface[J].Machine Design and Research,2004,20(3):24-27.
[8]Yang Jinyong,Huang Kezheng,Ren Huaiwei.Study on PLM-oriented Product Lifecycle Genetic Model[J].International Journal of Manufacturing Technology,2008,14(1/2):201-214.
[9]尚勇,张清萍,黄克正,等.基于功能表面的概念设计产品模型研究[J].中国机械工程,2007,18(3):320-323．
Shang Yong,Zhang Qingping,Huang Kezheng,et al.Research on Product Model of Conceptual Design Based on Functional Surface[J].China Mechanical Engineering,2007,18(3):320-323.
[10]姜娉娉.基于知识的机械产品快速创新设计研究[D].济南:山东大学,2005．
[11]舒启林,王成恩.产品全生命周期中的制造信息模型[J].东北大学学报,2005,26(8):774-777．
Shu Qilin,Wang Chengen. Manufacturing Information Model during the Product Lifecycle[J]. Journal of Northeastern University,2005,26(8)：774-777.
[12]田建平，张旭．特征提取与可制造性知识表达[J]．机械设计与制造，2010(6):266-268．
Tian Jianping,Zang Xu. Feature Extraction and Manufacturability Knowledge Representation[J]. Machinery Design & Manufacture,2010(6)：266-268.
[13]王卫国．基于生长型设计理论的产品反求技术研究与开发[D]．济南：山东大学，2006．
[14]Yang Jinyong. Research on Function Surface Reconstitution Technology in the Growth Design Process[J].Journal of Theoretical and Applied Information TEC,2012，44(1)：73-77.
[15]Shannon C E. A Mathematical Theory of Communication[J]. The Bell System Technical Journal,1948,27(1):397-423.