As the problems of high speed motorized spindle's contact loading, a non-contact loading equipment with electromagnet was designed. The equipment was mainly composed by loading disc with high permeability, direct current(DC) electromagnet, constant current source testing part. The electromagnetic force was produced on loading disc during interaction between the iron-nickel alloy loading disc with diameter of 80mm, thick of 40mm and DC air-gap magnetic field. The spindle load of cutting forces was simulated by the electromagnetic forces. And so non-contact loading on high speed motorized spindle could be realized. Using the presented equipment, loading experiments were done to the grinding motorized spindle with type of 170MD18Y16. And the results show that the value of loading and setting are accordant. The presented equipment can meet the requirements for the loading on high speed motorized spindle. The rotate speed of spindle and exciting current are main factors influencing non-contact electromagnetic loading during the air-gap unchanged.
Wang Junming,Tang Yangping,Bin Hongzan,et al.Research on Undeformed Chip Thickness and Unit Grinding Force during Surface Grinding of 55 Steel[J].China Mechanical Engineering,2009,20(10):1176-1179.
Meng Jie,Chen Xiaoan,Kang Huimin,et al.Study on Dynamic Loading Experiment of High Speed Motorized Spindle[J].Journal of Mechanical Strength,2009,31(4):689-692.
Li Songsheng,Zhang Chaohuang,Li Zhongxing,et al.Loading Experiment of High Speed Motorized Spindle Used for Milling the inside Surface of Bearing Rings[J].Bearing,1996(4):35-38.
[4]
Jiang Dayong,Wang Taiyong,Jiang Yongxiang,et al.Reliability Analysis of Motor Spindle Bearing Based on Operating Condition[C]//Third International Conference on Measuring Technology and Mechatronics Automation.Shanghai:IEEE,2011:989-992.
[5]
Chen Jenq-Shyong,Chen Kwan-Wen.Bearing Load Analysis and Control of a Motorized High Speed Spindle[J].International Journal of Machine Tools & Manufacture,2005,45:1487-1493.
[6]
Chen Shih-Chang,Juan Yu-Ling,Tang Chia-Hui,et al.Analysis of the Harmonics Losses and Bearing Load for Motorized High Speed Spindle Part I:Modeling[C]//International Conference on Industrial Engineering and Engineering Management.Macao:IEEE,2010:772-777.
[7]
潘奔流,叶军,薛玉君,等.高速电主轴轴承性能试验台的研制[J].轴承,2011(4):48-50.
Pan Benliu,Ye Jun,Xue Yujun,et al.Development of Test Rig for High-speed Electric Spindle Bearings[J].Bearing,2011(4):48-50.
Cao Guangzhong,Yu Lie,Xie Youbai.Rotating Loss Analysis for Active Magnetic Bearing with Solid Rotating Rotor[J].Journal of Aerospace Power,2003,18(1):124-129.
Wu Qinghai,Zhu Huangqiu.Parameter Design and Performance Analysis for Three-degree Freedom Hybrid Magnetic Bearing with Bilateral Magnetic Pole Faces[J].China Mechanical Engineering,2009,20(12):1477-1483.
Luo Min,Wang Lizhi,Jiang Tongmin.Statistic Analysis of Accelerated Reliability Grouth Testing Based on Proportional Intensity Model[J].Journal of Tongji University(Natural Science),2011,39(4):591-594.
Huang Guangzu,Zhao Qinzhi,Sheng Bohao,et al.Research on the Loading Chart for Reliability Testing of Machining Center[J].Manufacturing Technology and Machine Tool,2008(2):60-65.
Wang Junming,Ye Renzhen,Tang Yangping,et al.Research on the Grinding Force Model of Steel 55 during Surface Grinding with CBN Wheel[J].Diamond and Abrasives Engineering,2010,30(1):67-70.