基于新型梁单元模型的薄壁弯梁耐撞性优化

摘要/Abstract

摘要：

以矩形截面Z型薄壁弯梁为例，引入新型梁单元参数化模型建模方法，通过对薄壁梁进行碰撞分析提取了塑性铰的弯曲刚度特性曲线，将参数化后的弯曲刚度特性曲线赋予梁单元简化模型，实现了梁单元模型对壳单元模型的等效替代。在此基础上，应用均匀拉丁方试验设计方法，选取一定数量的参数样本点，建立了设计变量与弯曲刚度曲线参数之间的响应面近似模型，并采用连续二次规划的优化算法对梁单元模型进行了耐撞性优化。结果表明，采用新型梁单元简化模型代替详细的壳单元模型进行优化分析是可行的。

关键词: 薄壁弯梁, 梁单元模型, 耐撞性, 优化设计

Abstract:

A new type simplified beam model was created for thin-walled curved beam with box cross section. The bending stiffness curve of the thin-walled beam was derived and applied to generate the simplified beam model. Same crashworthiness analyses were performed on both detailed and simplified beam model to verify the accuracy and efficiency of the developed beam model. On the basis of that, response surface method was utilized to establish relationship among design variables and parameters of the bending resistance，and sequential quadratic programming method was applied to optimize the crashworthiness of the simplified model. Judged from the analysis and optimization results, the detail shell model can be replaced by the simplified beam model.

Key words: thin-walled curved beam, beam element model, crashworthiness, optimal design

中图分类号:

U461.91

漆维, 张维刚, 陈立娜, 关晓洁. 基于新型梁单元模型的薄壁弯梁耐撞性优化[J]. 中国机械工程, 2014, 25(7): 989-993.

Qi Wei, Zhang Weigang, Chen Lina, Guan Xiaojie. Research on Crashworthiness Optimal Design of Thin-walled Curved Beam Based on New Type Beam Element Model[J]. China Mechanical Engineering, 2014, 25(7): 989-993.

参考文献

[1]Kim T H, Reid S R. Bending Collapse of Thin-walled Rectangular Section Columns[J]. Computers and Structures, 2001(79):1897-1911.
[2]Kecman D.An Engineering Approach to Crashworthiness of Thin-walled Beams and Joints in Vehicle Structures[J]. Thin-walled Structures, 1997(28):309-320.
[3]Liu Yucheng, Day M L. Multi-axis Bending of Channel Section Beam and Modeling[J]. Thin-walled Structures, 2008(46): 1290-1303.
[4]Liu Yucheng, Day M L. Bending Collapse of Thin-walled Circular Tubes and Computational Application[J]. Thin-Walled Structures, 2008(46):442-450.
[5]Wierzbicki T,Recke L,Abramowicz W, et al. Stress Profiles in Thin-walled Prismatic Columns Subjected to Crush Loading—Ⅰ. Compression[J]. Comput Struct, 1994, 51(6):611-623.
[6]Wierzbicki T, Recke L, Abramowicz W,et al. Stress Profiles in Thin-walled Prismatic Columns Subjected to Crush Loading—Ⅱ.Bending[J]. Comput Struck, 1994, 51(6):623-641.
[7]Liu Yucheng, Day M L. Simplified Modeling of Thin-walled Box Section Beam[J]. International Journal of Crashworthiness, 2006(11):263-272.
[8]李亦文.车身结构抗撞性问题的简化建模及优化方法研究[D].长春:吉林大学,2011.
[9]王琥,李光耀,李恩颖,等.基于响应面法的汽车吸能部件优化问题研究[J].系统仿真学报, 2007,19(16):3824-3829.
Wang Hu, Li Guangyao , Li Enying, et al. Study of Optimization for Absorbing Energy Member of Automobile Based on Response Surface Method[J]. Journal of System Simulation, 2007,19(16):3824-3829.
[10]Hou Shujuan, Li Qing, Long Shuyao, et al. Design Optimization of Regular Hexagonal Thin-walled Columns with Crashworthiness Criteria[J].Finite Elements in Analysis and Design, 2007(43): 555-565.
[11]张维刚,廖兴涛,钟志华.基于逐步回归模型的汽车碰撞安全性多目标优化[J].机械工程学报,2007,43(8):142-147.
Zhang Weigang，Liao Xingtao，Zhong Zhihua.Multi-objective Optimization for Crash Safety Design of Vehicles Using Stepwise Regression Model[J]. Chinese Journal of Mechanical Engineering, 2007,43(8):142-147.
[12]宋凯，成艾国，胡朝辉,等. 基于真实接头车身概念模型的结构优化[J].中国机械工程,2010,21(22):2764-2770.
Song Kai,Cheng Aiguo,Hu Zhaohui,et al.Design Optimization of Automotive Body Structure Based on Actualjoint-based Conceptual Model[J]. China Mechanical Engineering,2010,21(22):2764-2770.
[13]Liu Yucheng. Optimum Design of Straight Thin-walled Box Section Beams for Crashworthiness Analysis[J].Finite Elements in Analysis and Design, 2008(44):139-147.

[1]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[2]	张琦1;李增亮1;董祥伟1;刘延鑫1;王雨婷2. 大功率潜水电机冷却系统分析方法与试验研究[J]. 中国机械工程, 2021, 32(03): 368-377.
[3]	刘世豪, 林茂. [综述]高速数控转台优化设计方法研究现状与展望[J]. 中国机械工程, 2020, 31(13): 1629-1637.
[4]	高富东;王德心;王海东;曹建平. 基于射流冲击作用的舰机适配性数值分析与优化[J]. 中国机械工程, 2020, 31(12): 1425-1436.
[5]	吕凤鹏;李朝阳;黄健;陈兵奎. RV减速器转臂轴承的优化设计[J]. 中国机械工程, 2020, 31(09): 1043-1048.
[6]	姚佐平;韦勇;吕俊成;刘昌业;梁永彬. 基于精细化多刚体模型的微型汽车耐撞性研究[J]. 中国机械工程, 2020, 31(03): 352-359,372.
[7]	邹伟生1;刘瑞仙1;刘少军2. 粗颗粒海底矿石浆体提升电泵研究[J]. 中国机械工程, 2019, 30(24): 2939-2944.
[8]	杨奇;甄文强;姬永强. 以减小初始扰动为目标的火箭弹定心部优化设计[J]. 中国机械工程, 2019, 30(21): 2611-2615.
[9]	白中浩;谭雯霄;张林伟;周存文. 基于仿生微圆结构的汽车吸能盒耐撞性分析[J]. 中国机械工程, 2019, 30(11): 1261-1267.
[10]	陈东1;许敏2;李治3;郭松1;高彦凯1. 不等厚板激光拼焊在线碾压机构碾压轮结构参数优化设计[J]. 中国机械工程, 2019, 30(07): 872-876.
[11]	张旭1,2;张孟洁1;王格格1;李伟2,3;阮江涛1. 叶片表面粗糙条件下钝尾缘翼型优化设计[J]. 中国机械工程, 2019, 30(06): 728-734.
[12]	柯庆镝;李杰;吕岩;刘光复;宋守许. 基于结构和性能相似度分析函数的机械产品优化设计方法[J]. 中国机械工程, 2019, 30(05): 586-594.
[13]	朱佳栋;苏少辉;陈昌;刘桂英. 面向产品配置设计的改进交互式遗传算法[J]. 中国机械工程, 2018, 29(20): 2474-2478.
[14]	王倩蓉;姜潮;方腾. 一种考虑参数相关性的可靠性优化设计方法[J]. 中国机械工程, 2018, 29(19): 2312-2319,2326.
[15]	胡朝辉;崔雪姣;成艾国;秦晓凯. 基于均匀化循环理论的车身焊点布局优化方法[J]. 中国机械工程, 2018, 29(19): 2384-2388.