基于灰色关联度法的汽车转向操纵动态特性评价

摘要/Abstract

摘要：

为解决汽车转向操纵动态特性的评价问题,提出了一种主观评价汽车转向操纵动态特性的综合评价方法。针对在主观评价中，专家所打的分数无法避免个人因素的影响而具有一定灰色性与模糊性的问题，采用灰色关联度法处理专家所打的分数，并通过模糊数学方法来计算汽车转向操纵动态特性的综合得分。最后，通过实例计算，比较了采用该方法得到的汽车转向操纵动态特性的计算结果与实际专家平均打分结果,验证了该评价方法的正确性与可行性。

关键词: 汽车转向操纵, 动态特性, 灰色关联度法, 模糊数学

Abstract:

In order to solve the problem of how to evaluate the dynamic characteristic of vehicle steering control, an integrated subjective evaluation method was presented. Because of the personal factors the subjective evaluation results of experts have both gray characteristics and fuzziness, gray correlation method was used to dispose the subjective evaluation results of experts. Then the final evaluation result of the dynamic characteristic of vehicle steering control was calculated through fuzzy mathematics. Finally, the correctness and feasibility of this method was verified through an example calculation.

Key words: vehicle steering control, dynamic characteristic, gray correlation method, fuzzy mathematics

中图分类号:

U461.6

赵又群, 许健雄, 刘英杰, 汪伟. 基于灰色关联度法的汽车转向操纵动态特性评价[J]. 中国机械工程, 2014, 25(4): 563-567.

Zhao Youqun, Xu Jianxiong, Lin Yingjie, Wang Wei. Evaluation of Dynamic Characteristic of Vehicle Steering Control Based on Gray Correlation Method[J]. China Mechanical Engineering, 2014, 25(4): 563-567.

参考文献

[1]赵又群,尹浩,张丽霞.汽车操纵逆动力学的现状与发展[J].中国机械工程,2005,16(1):77-82.
Zhao Youqun,Yin Hao,Zhang Lixia.Present State and Perspectives of Vehicle Handling Inverse Dynamics[J].China Mechanical Engineering,2005,16(1):77-82.
[2]张丽霞,赵又群,吴杰.基于最优控制的汽车操纵逆动力学的研究[J].中国机械工程, 2007,18(16):2009-2011.
Zhang Lixia,Zhao Youqun,Wu Jie.Research on Vehicle Handling Inverse Dynamics Based on Optimal Control[J].China Mechanical Engineering,2007,18(16):2009-2011.
[3]Ishio J,Ichikawa H,Kano Y,et al.Vehicle-handling Quality Evaluation Through Model-based Driver Steering Behavior[J]. Vehicle System Dynamics:International Journal of Vehicle Mechanics and Mobility,2008,46(1):549-560．
[4]赵伟平,赵又群,杨国权,等.汽车操纵性和稳定性的联合优化[J].汽车技术,2005(12):16-19.
Zhao Weiping,Zhao Youqun,Yang Guoquan,et al.Joint Optimization of Vehicle Handling and Stability[J].Automobile Technology, 2005(12):16-19.
[5]赵又群,郭孔辉.汽车操纵性评价指标的研究[J].汽车工程,2001,23(1):1-4.
Zhao Youqun,Guo Konghui.A Research on Active Safety Evaluation of Vehicle[J]. Automotive Engineering,2001,23(1):1-4.
[6]Zschocke A,Albers A.Links Between Subjective and Objective Evaluations Regarding the Steering Character of Automobiles[J]. International Journal of Automotive Technology,2008,9(4):473-481．
[7]王化吉,宗长富,管欣,等.基于模糊层次分析法的汽车操纵稳定性主观评价指标权重确定方法[J].机械工程学报, 2011, 47(24): 83-90.
Wang Huaji,Zong Changfu,Guan Xin,et al.Method of Determining Weights of Subjective Evaluation Indexes for Car Handling and Stability Based on Fuzzy Analytic Hierarchy Process[J].Journal of Mechanical Engineering,2011,47(24):83-90.
[8]黄建兴,赵又群.人—车闭环操纵稳定性综合评价及其虚拟样机实现[J].机械工程学报,2010,46(10):102-108.
Huang Jianxing,Zhao Youqun.Comprehensive Evaluation of Human-vehicle Closed-loop System for Handling Stability and Technology of Virtual Prototype[J].Journal of Mechanical Engineering,2010,46(10):102-108.
[9]邢如飞,管欣,田承伟,等.汽车操纵稳定性主观评价指标权重确定方法[J].吉林大学学报(工学版),2009,39(增1):33-38.
Xing Rufei,Guan Xin,Tian Chengwei,et al.Weight of Subjective Evaluation Indexes for Car Handling and Stability[J]. Journal of Jilin University(Engineering and Technology Edition),2009,39(S1):33-38.
[10]宗长富,郭孔辉.汽车操纵稳定性的研究与评价[J].汽车技术,2000(6):6-11.
Zong Changfu,Guo Konghui.Research and Evaluation on Vehicle Handling and Stability[J].Automobile Technology, 2000(6): 6-11.
[11]SAE Technical Standards Board Rules.SAE 1441-1998 Subjective Rating Scale for Vehicle Handling[S]. Warrendale: SAE,1998.

[1]	刘涛1,2;韩炎1,2;孙仁福1,2;赵丁选1,2. 数字型液压变压器动态特性研究[J]. 中国机械工程, 2021, 32(03): 284-289.
[2]	刘俊龙1;孙冬野1;刘小军1;叶明2;尤勇1. 机电控制无级变速器执行机构动态响应特性仿真研究[J]. 中国机械工程, 2020, 31(03): 253-260.
[3]	赵又群;白毅强;叶超;邓耀骥;徐瀚;王秋伟. 机械弹性车轮静动态特性研究[J]. 中国机械工程, 2019, 30(19): 2306-2312.
[4]	谢苗;李晓婧. 掘支锚联合机组支撑油缸多目标优化设计[J]. 中国机械工程, 2019, 30(16): 1976-1981.
[5]	朱葛;董世民;张卫卫;张俊杰;张超. 变刚度弹簧往复泵锥阀及其动态特性仿真[J]. 中国机械工程, 2018, 29(24): 2912-2916.
[6]	朱坚民;郑洲洋;胡育佳;周亚南. 滚珠丝杠进给系统滚动结合部径向动态特性参数辨识[J]. 中国机械工程, 2018, 29(04): 441-449.
[7]	赵劲松1,2,3;张传笔3;赵子宁3;王志鹏3;姚静1,2,3. 高速开关数字阀的静动态特性[J]. 中国机械工程, 2018, 29(02): 145-150,157.
[8]	冯凯;胡小强;赵雪源;李文俊. 三瓣式气体箔片径向轴承的静动态特性[J]. 中国机械工程, 2017, 28(15): 1826-1835.
[9]	陈剑, 邓支强, 乔晋红. 飞机舵面液压助力器及舵面系统建模与性能仿真[J]. 中国机械工程, 2017, 28(07): 800-805.
[10]	左希庆, 阮健, 李胜, 刘国文, 孙坚. 波登管2D压力伺服阀反馈装置的特性研究[J]. 中国机械工程, 2017, 28(04): 451-455.
[11]	黄俊, 袁军堂, 汪振华. 基于NSGA_Ⅱ算法的双驱动进给系统结构优化[J]. 中国机械工程, 2016, 27(24): 3294-3300.
[12]	宋智勇, 李晴朝, 姜忠, 康文俊, 杜丽, 王伟. CNC机床动态特性与S形试件轮廓误差映射关系分析[J]. 中国机械工程, 2016, 27(23): 3157-3161,3166.
[13]	吴金波, 宋宇宸. 海上作业起重机主动升沉补偿系统的设计与分析[J]. 中国机械工程, 2016, 27(15): 1989-1996.
[14]	马伟, 景月帅, 李济顺, 邹声勇, 薛玉君, 杨芳. 基于电液伺服系统的多绳缠绕式提升机浮动天轮主动调绳性能研究[J]. 中国机械工程, 2016, 27(14): 1870-1876.
[15]	周鑫, 许允斗, 姚建涛, 郑魁敬, 赵永生, . 5-UPS/PRPU冗余驱动并联机床弹性动力学分析[J]. 中国机械工程, 2016, 27(09): 1137-1142,1149.