多道次单点渐进成形变形规律试验研究

摘要/Abstract

摘要：

针对材料在多道次单点渐进成形中的变形规律，研究了其流动特性和应变分布。试验结果表明,多道次单点渐进成形所得零件存在较为明显的第二主应变,且随成形深度的增大而增大,同时,零件壁厚随成形深度的增大明显地减小。针对此问题进行了补充试验,证明增加成形道次可在一定程度上改善成形质量。此外,结合对试验数据的分析,分析了壁厚随成形深度变化的原因,指出对于大成形角度的零件在多道次单点渐进成形中存在成形深度极限。

关键词: 多道次, 渐进成形, 应变分布, 壁厚

Abstract:

Flowage property and strain distribution was studied based on the deformation trend of the part gained by multi-stage single point incremental forming. Experimental results show that exists a significant second major strain, increasing with increase in forming depth and wall thickness decreases with increase in forming depth for the part gained by multi-stage forming. Increasing the quantity of stage can improve the forming quality. Further more, according to the analyses of the experiments, a limitation in forming depth in multi-stage single point incremental forming was proposed.

Key words: multi-stage, incremental forming, strain distribution, wall thickness

中图分类号:

金玲玲, 高霖, 史晓帆, 张其龙, 徐佳晖. 多道次单点渐进成形变形规律试验研究[J]. 中国机械工程, 2014, 25(2): 262-266.

Jin Lingling, Gao Lin, Shi Xiaofan, Zhang Qilong, Xu Jiahui. Experimental Study on Deformation Law of Multi-stage Single Point Incremental Forming[J]. China Mechanical Engineering, 2014, 25(2): 262-266.

参考文献

[1]莫健华,韩飞.金属板材数字化渐进成形技术研究现状[J].中国机械工程,2008,19(4):491-497．

Mo Jianhua,Han Fei.State of the Arts and Latest Research on Incremental Sheet NC Forming Technology[J]. China Mechanical Engineering,2008,19(4):491-497．

[2]Jeswiet J,Micari F,Hirt G,et al.Asymmetric Single Point Incremental Forming of Sheet Metal[J]. CIRP Annals-Manufacturing Technology,2005,54(2):88-114.
[3]史晓帆,徐岩,高霖,等.方锥形渐进成形制件误差补偿工艺研究[J].中国机械工程,2012,23(18):2248-2252．
Shi Xiaofan,Xu Yan,Gao Lin,et al.Investigation on Error Compensatory Process of Pyramidal Parts Formed by Single Point Incremental Forming[J].China Mechanical Engineering,2012,23(18):2248-2252．
[4]Hirt G,Ames J,Bambach M.A New Forming Strategy to Realize Parts Designed for Deep-drawing by Incremental CNC Sheet Forming[J].Steel Research International,2005,76(2/3):160-166．
[5]Araghi B T,Manco G L,Bambach M,et al.Investigation into a New Hybrid Forming Process:Incremental Sheet Forming Combined with Stretch Forming[J].CIRP Annals-Manufacturing Technology,2009,58(1):25-228．
[6]沈黎萍,高锦张,蒋松,等.板料渐进成形半球形件的路径研究[J].锻压技术,2010,35(6):40-44．
Shen Liping,Gao Jinzhang,Jiang Song,et al.Research on Incremental Forming Path of Hemispherical Workpiece[J]. Forging & Stamping Technology,2010,35(6):40-44．
[7]周六如,肖祥芷,莫健华.金属直壁筒形件数控渐进成形工艺研究[J].机械科学与技术,2004,23(11):1366-1369.
Zhou Liuru,Xiao Xiangzhi,Mo Jianhua.A Study of NC Incremental Vertical Wall Cylinder Forming Process[J].Mechanical Science and Technology,2004,23(11):1366-1369．
[8]周六如.基于数控渐进成形技术的方形盒成形工艺[J].锻压技术,2009(4):65-68．
Zhou Liuru.Forming Process of Square Box Based on NC Incremental Forming Technology[J]. Forging & Stamping Technology,2009(4):65-68．
[9]周六如.直壁矩形盒渐进成形技术[J].模具工业,2009,35(5):40-43．
Zhou Liuru.Incremental Forming Technology of Vertical-walled Rectangular Box[J].Die & Mould Industry,2009,35(5):40-43．
[10]Verbert J,Belkassem B,Henrard C,et al.Multi-Step Toolpath Approach to Overcome Forming Limitations in Single Point Incremental Forming[J].International Journal of Material Forming,2008,1(1):1203-1206．
[11]Duflou J R,Verbert J,Belkassem B,et al.Process Window Enhancement for Single Point Incremental Forming Through Multi-step Toolpaths[J].CIRP Annals-Manufacturing Technology,2008,57(1):253-256．
[12]Young D,Jeswiet J.Wall Thickness Variations in Single-point Incremental Forming[J].Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2004,218(11):1453-1459.

[1]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[2]	吴坚, Jocher Dietrich, 李强. 无支撑板材数字化渐进成形工艺研究 [J]. J4, 201016, 21(16): 2002-2005,2015.
[3]	秦勤1,2；何流1；李程2；臧勇1. 铜铝复合板渐进成形回弹缺陷研究[J]. 中国机械工程, 2021, 32(03): 348-356.
[4]	王荣彪1;康宜华1,2;邓永乐1;王碧瑶1;汪圣涵2;唐健1. 钻杆内壁腐蚀的交直流复合磁化漏磁检测方法[J]. 中国机械工程, 2021, 32(02): 127-131，140.
[5]	李铭, 代培培, 常志东, 陈军, . [成形质量的闭环与自适应控制技术]具有开放几何特征钣金件渐进成形的回弹控制与补偿[J]. 中国机械工程, 2020, 31(22): 2723-2727.
[6]	侯晓莉;李言;杨明顺;柏朗;石珣;张成兴. 铝板数控单点渐进成形的成形极限曲线研究[J]. 中国机械工程, 2020, 31(08): 960-967.
[7]	朱虎1;肖冬选1;姜在宽2. 基于STL模型的双面数控渐进成形干涉检查与修正[J]. 中国机械工程, 2019, 30(23): 2890-2897.
[8]	刘超1，2;王连东1;刘恒1;高缘1;王志鹏1. 带壁厚偏差的无缝钢管推压-拉拔复合缩径[J]. 中国机械工程, 2018, 29(11): 1375-1379,1385.
[9]	陈继平;钱健清;王会廷. 渐进成形锥形件壁厚的正弦定理预测精度研究[J]. 中国机械工程, 2017, 28(22): 2760-2766.
[10]	朱虎;王河坡;邢宇飞. 数控渐进成形不等层间距等高线轨迹生成[J]. 中国机械工程, 2017, 28(17): 2135-2141.
[11]	徐鸿, 郭鹏, 李鸿源, 田振华, 邓博. 基于SH模态导波杆的电站高温结构壁厚测量方法[J]. 中国机械工程, 2017, 28(07): 757-763.
[12]	韩传军, 任旭云, 郑继鹏. 高温含砂原油中等壁厚螺杆泵定子衬套磨损分析[J]. 中国机械工程, 2017, 28(04): 446-450.
[13]	方军, 鲁世强, 王克鲁, 姚正军. 工艺参数对21-6-9高强不锈钢管数控弯曲壁厚减薄影响的显著性分析[J]. 中国机械工程, 2015, 26(9): 1233-1238,1277.
[14]	骆俊廷, 田保瑞, 陈艺敏, 张春祥. 球形件反复拉深成形工艺有限元模拟及试验[J]. 中国机械工程, 2015, 26(11): 1538-1541,1549.
[15]	徐佳晖, 高霖, 史晓帆, 安传海. 小曲率球面零件数控渐进成形缺陷问题研究[J]. 中国机械工程, 2014, 25(23): 3164-3167.