基于CFD的双螺杆压缩机的三维动态仿真分析研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (24): 3366-3371.

基于CFD的双螺杆压缩机的三维动态仿真分析研究

吴慧媛1,2;何雪明2;戴进2

1.无锡职业技术学院工业中心,无锡,214122
2.江南大学江苏省食品先进制造装备技术重点实验室,无锡,214122

出版日期:2013-12-25 发布日期:2013-12-27
基金资助:
国家自然科学基金资助项目(51275210);江苏省产学研资助项目(BY2013015-30);江苏省高等职业院校国内高级访问学者计划资助项目（2013）

Research on 3D Dynamic Simulation Analysis of Screw Compressor by CFD

Wu Huiyuan1,2;He Xueming2;Dai Jin2

1.Industrial Centre,Wuxi Institute of Technology,Wuxi,Jiangsu,214122
2.Jiangsu Province Key Laboratory of Advanced Food Manufacturing Equipment and Technology,Jiangnan University, Wuxi, Jiangsu, 214122

Online:2013-12-25 Published:2013-12-27
Supported by:
National Natural Science Foundation of China（No. 51275210)）

摘要/Abstract

摘要：

为了研究双螺杆压缩机的流场动力学特性,提出基于双螺杆压缩机的工作循环为一个理论循环的假设,建立其工作过程的数值计算模型,采用计算流体力学软件Fluent中的动网格技术对双螺杆压缩机的工作过程和流场动力学特性进行了动态模拟仿真。搭建了实验平台并研究分析了双螺杆压缩机的p-V变化规律,结果表明,仿真结果较好地吻合实验数据,验证了模型的正确性和模拟方法的有效性。

关键词: 双螺杆压缩机, 计算流体力学, Fluent, 动网格

Abstract:

In order to study the flow field dynamics characteristics of a screw compressor, a numerical calculation model of the working process was established on the suppose where the working cycle of screw compressor was a theoretical cycle, the working process and the flow field dynamic characteristics were simulated through the CFD software of Fluent by the dynamic mesh technology. Additionally, to verify the numerical calculation model is accurate and the simulation method is effective, experiments on studying the pressure-volume changes in screw compressor were carried out and the results show that the simulation data are in good agreement with the experimental ones.

Key words: screw compressor, computational fluid dynamics(CFD), Fluent, dynamic mesh

中图分类号:

TH455

吴慧媛, 何雪明, 戴进. 基于CFD的双螺杆压缩机的三维动态仿真分析研究[J]. 中国机械工程, 2013, 24(24): 3366-3371.

Wu Huiyuan, He Xueming, Dai Jin. Research on 3D Dynamic Simulation Analysis of Screw Compressor by CFD[J]. China Mechanical Engineering, 2013, 24(24): 3366-3371.

参考文献

[1]Wu Huagen, Xing Ziwen, Shu Pengcheng. Theoretical and Experimental Study on Indicator Diagram of Twin Screw Refrigeration Compressor[J]. International Journal of Refrigeration, 2004, 27: 331-338.
[2]Kovacevic A, Stosic N. Mujic E, et al. International Compressor Engineering Conference[C]//The Purdue University School of Mechanical Engineering. Advances in Numerical Modelling of Helical Screw Machines. West Lafayette, 2010 :1158-1166.
[3]Kovacevic A, Stosic N, Smith I K. A Numerical Study of Fluid Solid Interaction in Screw Compressors[J]. International Journal of Computer Applications in Technology, 2004, 21(4): 148-158.
[4]Cao Feng, Gao Tieyu, Li Songshan, et al. Experimental Analysis of Pressure Distribution in a Twin Screw Compressor for Multiphase Duties[J]. Experimental Thermal and Fluid Science, 2011, 35: 219-225.
[5]Zhang Xiaojun, Peng Xueyuan, Xing Ziwen. Theoretical and Experimental Research on the Exhaust Pressure Pulsation of Screw Compressors[J]. Compressor Technology, 2001, 6: 3-6.
[6]张宏飞, 曹红松, 赵捍东, 等. 数值仿真中湍流模型的选择[J]. 弹箭与制导学报, 2006, 26(4): 242-244.
Zhang Hongfei, Cao Hongsong, Zhao Handong, et al. The Choice of Turbulence Model in Numerical Simulation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2006, 26(4): 242-244.
[7]雷林, 王智祥, 孙鹏, 等. 计算流体力学k-ε二方程湍流模型应用研究[J]. 船舶工程, 2010, 32(3): 5-8.
Lei Lin, Wang Zhixiang, Sun Peng, et al. Application Study on the Turbulence Models of Quadratic Equation on CFD Calculation[J]. Ship Engineering, 2010, 32(3): 5-8.
[8]Ivan M, Omar G. Dynamic-mesh Finite Element Method for Lagrangian Computational Fluid Dynamics[J]. Finite Elements in Analysis & Design, 2002, 38(10): 965-982.
[10]Tao Tang. Moving Mesh Methods for Computational Fluid Dynamics[J]. Contemporary Mathematics, 2005, 383: 141-174.
[11]Ahn H T, Branets L, Carey G F. Moving Boundary Simulations with Dynamic Mesh Smoothing[J]. International Journal for Numerical Methods in Fluids, 2010, 64: 887-907.

[1]	陈冠峰1;陈松平1;蔡思捷2. 基于离散像素法的双螺杆压缩机螺杆转子间隙布置方法[J]. 中国机械工程, 2020, 31(24): 2937-2942，3023.
[2]	郑子军;薛凯元;文东辉;徐耀耀;应富强. 线性液动压抛光加工的流体动压特性研究[J]. 中国机械工程, 2020, 31(08): 907-914.
[3]	吴超1;尹雪梅2;李蒙蒙1;李奕君1;王文3. 一种滑动轴承油膜性能计算的动网格方法[J]. 中国机械工程, 2019, 30(24): 2961-2967.
[4]	梁平华1;唐倩1;余志强2;冯琪翔1;刘威1. 激光选区熔化的风场仿真与流道结构优化[J]. 中国机械工程, 2019, 30(07): 858-863.
[5]	姚利明1;刘巨保1;张宏岩2;张晓川2;岳欠杯1. 缩径管内两相流砂粒碰撞和冲蚀特性研究[J]. 中国机械工程, 2018, 29(06): 674-681,704.
[6]	何雪明, 姜振钢, 武美萍, 张荣, 纪小刚. 双螺杆压缩机转子啮合线与型线关系研究[J]. 中国机械工程, 2017, 28(07): 763-770.
[7]	何雪明, 陈泽华, 武美萍, 张荣. 基于磨料水射流的螺杆转子加工新方法研究[J]. 中国机械工程, 2016, 27(19): 2581-2588.
[8]	何雪明, 陈泽华, 武美萍, 张荣 . 基于全生命周期的螺杆转子刀具设计研究[J]. 中国机械工程, 2016, 27(18): 2415-2423.
[9]	何亚峰, 卢文壮, 干为民, . 基于电场分析的钛合金电解加工圆孔成形研究[J]. 中国机械工程, 2016, 27(11): 1461-1466.
[10]	孙建辉, 周丹锋, 袁巧玲. 带卸压槽的微摩擦气缸Fluent仿真分析[J]. 中国机械工程, 2015, 26(4): 491-496.
[11]	梁亮, 江华, 唐勇, 陈柏, 段想平. 一种内螺旋管道机器人[J]. 中国机械工程, 2014, 25(24): 3289-3294.
[12]	于晓东;高春丽;邱志新;谭力;李欢欢;庄建新. 高速重载静压推力轴承润滑性能研究[J]. 中国机械工程, 2013, 24(23): 3230-3234.
[13]	吴慧媛1,2;何雪明2;潘成龙2. 基于流体仿真的双螺杆压缩机转子型线研究[J]. 中国机械工程, 2013, 24(22): 3080-3085.
[14]	刘国庆1, 2, 杨万里2, 邓晓龙2. 乘用车发动机前舱温度场优化[J]. 中国机械工程, 2013, 24(09): 1252-1257.
[15]	何雪明, 戴进, 刘洪园. 基于自由曲线的螺杆转子型线的正反向设计[J]. 中国机械工程, 2012, 23(22): 2752-2757.