[1]王文国,王永利.风电机低温问题及其解决方案[J].太阳能,2007(8): 38-39.
Wang Wenguo, Wang Yongli.Low Temperature Problem of Wind Turbine and Its Solutions[J]. Solar Engergy, 2007(8): 38-39.
[2]Crabtree C, Feng Y, Tavner P J. Detecting Incipient Gearbox Failure in Wind Turbines: A New Signal Analysis Method for On-line Condition Monitoring[C]//Proceedings of the Scientific Track of the European Wind Energy Conference. Warsaw, 2010: 154-156.
[3]Terrell E J, Needelman W M, Kyle J P. Tribological Challenges to the System[J].Wind Systems, 2010(3): 26-30.
[4]Energy Efficiency & Technology.Heading off Gearbox Failure[EB/OL].[2011-08-10].http://eetweb.com/wind/heading-off-gearbox-failure-0811/index.html.
[5]赵振宙,郑源,陈星莺.海上风电机组主要机械故障机理研究[J].水利水电技术,2009,40(9): 32-34.
Zhao Zhenzhou, Zheng Yuan, Chen Xingying. Research on Mechanism of Main Mechanical Faults of Offshore Wind Turbine[J].Water Resources and Hydropower Engineering, 2009,40(9): 32-34.
[6]张立勇.大型风电齿轮箱均载性能优化[D].北京:机械科学研究总院,2009.
[7]Musial W , Butterfield S, McNiff B. Improving Wind Turbine Gearbox Reliability Preprint[C]//2007 European Wind Energy Conference.Milan, 2007: 1-10.
[8]Sheng S S, McDade M, Errichello R.Wind Turbine Gearbox Failure Modes-a Brief[C]//ASME/STLE 2011 International Joint Tribology Conference. Los Angeles, 2011:1-26.
[9]Windpower Engineering. Wear-resistant Bearings for Wind Equipment[EB/OL].[2011-02-23]. http://www.windpowerengineering.com/design/mechanical/bearings/wear-resistant-bearings-for-wind-equipment/.
[10]赵玉良,徐鸿钧,姜永涛. 风电齿轮的微点蚀研究[J].能源工程,2010(4): 41-44.
Zhao Yuliang, Xu Hongjun, Jiang Yongtao. Research on Micropitting of Gear Fanks to Wind Turbine[J].Energy Engineering,2010(4): 41-44.
[11]Kapelevich A L. An Alternative Design for Speed Increasers[J].Wind Systems, 2010(4): 26-33.
[12]Veers P. Wind Turbine Design Standards: Influence on Reliability[C]//2nd Wind Turbine Reliability Workshop. Albuquerque, 2007:1-20.
[13]Ribrant J. Reliability Performance and Maintenance-A Survey of Failures in Wind Power Systems[D]. Stockholm:Royal Institute of Technology, 2006.
[14]LaPlante M. Carburizing Wind Turbine Gears[J]. Gear Solutions Magazine, 2009(5): 32-37.
[15]邢大志.风电齿轮箱内齿圈的强化途径[J].金属加工,2009(17): 14.
Xing Dazhi. Strengthen Methods of the Ring Gear in Wind Turbine Gearbox[J].Machinist Metal Forming,2009(17): 14.
[16]陈国民.关注风电齿轮技术推动企业技术进步[J].金属加工,2009(17): 8-10.
Chen Guomin.Concern on Wind Turbine Gear Technology, Promote Its Technological Progress[J].Machinist Metal Forming,2009(17): 8-10.
[17]Siebert H, Holm A P. Protecting Gears in Wind Power Applications[J]. Gear Solutions Magazine, 2009 (3):39-44.
[18]林腾蛟,沈亮,赵俊渝.风电增速箱输出级齿轮副疲劳寿命有限元分析[J].重庆大学学报,2012,35(1): 1-6.
Lin Tengjiao, Shen Lian, Zhao Junyu. Fatigue Life Finite Element Analysis of Output Gear Pair of Wind Turbine Speed-increase Gearbox[J].Journal of Chongqing University, 2012,35(1): 1-6.
[19]李明.风电增速箱斜齿轮齿向修形研究[D]. 大连:大连理工大学,2008.
[20]Schwingshandl F, Bodmer M, Fox G. MAAG DPPV-7-79 Gearbox—Advanced Solution of Modular Wind Turbine Drivetrain[EB/OL].[2013-02-01].http://www.timken.com/zh-cn/solutions/windenergy.
[21]Zhu Caichao, Xu Xiangyang, Lim T C, et al. Effect of Flexible Pin on the Synamic Behaviors of Wind Turbine Planetary Gear Drives[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 227(1): 74-86.
[22]Giger U, Arnaudov K. High Efficiency High Torque Gearbox For Multimegawatt Windturbines[J].The International Virtual Journal of Machines, Technologies and Materials, 2012(1):19-24.
[23]刘忠明,段守敏,王长路.风力发电齿轮箱设计制造技术的发展与展望[J].机械传动,2006,30(6): 1-6.
Liu Zhongming, Duan Shoumin, Wang Changlu. Development and Prospect of the Wind Turbine Gearbox Design and Manufacturing Technology[J]. Journal of Mechanical Transmission, 2006,30(6): 1-6.
[24]任彦忠,牛海峰.国内风电设备质量现状和应对措施[J].发电设备,2012,26(2): 141-144.
Ren Yanzhong, Niu Haifeng.Quality Management Status of Domestic Wind Power Equipment and the Countermeasures[J]. Power Equipment,2012,26(2): 141-144.
[25]张立勇,王长路,刘法根.风力发电及风电齿轮箱概述[J].机械传动,2008,32(6): 1-4.
Zhang Liyong, Wang Changlu, Liu Fagen. Summary on Development Status of Wind Power and Gearbox for Wind Turbine[J]. Journal of Mechanical Transmission, 2008,32(6): 1-4. |