[1]Cuppens K,Sas P,Hermans L.Evaluation of theFRF Based Substructuring and Modal SynthesisTechnique Applied to Vehicle FE Data[C]//Pro-ceedings of the International Conference on Noiseand Vibration Engineering.Leuven, Belgium, 2002:1143
-1150.
[2]Heylen W,Lammens S,Sas P.Modal Analysis The-ory and Testing [M].Leuven, Belgium:KatholiekeUniversiteit, 1998.
[3]吴仕超[1],蔡国平[1].考虑界面转角自由度的频域子结构法研究[J].振动工程学报,2011,24(3):323-326.
[4]董兴建[1],孟光[1].实验模型和有限元模型的混合建模方法[J].振动与冲击,2009,28(7):38-40.
[5]Imergun M, Robb D A, Ewins D J.StructuralModification and Coupling Dynamic Analysis UsingMeasured FRF Data [C]//Proceedings of the 4thInternational Modal Analysis Conference.London,1987:1136-1141.
[6]Jetmunderson B,Bielawa R L, Flannelly R.Generalized Frequency Domain SubstructureSynthesis[J], Journal of the American HelicopterSociety,1988,33(1):55-64.
[7]Ren Y,Beards C F.On Substructure Synthesis withFRF Data [ J].Journal of Sound and Vibration,1995,185(5):845-866.
[8]Liu W,Ewins D J.Substructure Synthesis viaElastic Media[J].Journal of Sound and Vibration,2002,257(2):361-379.
[9]Tsai J S, Chou Y F.The Identification of DynamicCharacteristics of a Single Bolt Joint[J].Journal ofSound and Vibration, 1988,125(3):487-502.
[10]廖伯瑜,周新民,尹志宏.现代机械动力学及其工程应用[M].北京:机械工业出版社,2003. 5
[11]Mao Kuanmin,Li Bin, Wu Jun, et al.StiffnessInfluential Factors-based Dynamic Modeling andIts Parameter Identification Method of Fixed Jointsin Machine Tools C J].International Journal ofMachine Tools & Manufacture,2010,50:156-164.
[12]李德葆,陆秋海.试验模态分析及应用[M].北京:科学出版社,2001.
[13]Esfandiari A,Bakhtiari-Nejad F,Sanayei M,et al.Structural Finite Element Model Updating UsingTransfer Function Data [ J].Computers andStructures ,2010,88:54-64. |