飞机结构件组合曲面侧铣加工刀轨生成方法

中国机械工程 ›› 2013, Vol. 24 ›› Issue (10): 1306-1311.

飞机结构件组合曲面侧铣加工刀轨生成方法

傅浩杰;廖文和;李迎光

南京航空航天大学，南京，210016

出版日期:2013-05-25 发布日期:2013-05-28
基金资助:
国家科技重大专项（2012ZX04010041）
National Science and Technology Major Project ( No. 2012ZX04010041)

An Approach to Tool Path Generation for Side Milling of Compound Surfaces in Aircraft Structural Part

Fu Haojie;Liao Wenhe;Li Yingguang

Nanjing University of Aeronautics and Astronautics,Nanjing,210016

Online:2013-05-25 Published:2013-05-28
Supported by:
National Science and Technology Major Project ( No. 2012ZX04010041)

摘要/Abstract

摘要：

针对目前五轴侧铣刀轨生成方法生成组合曲面侧铣加工刀轨困难的问题,通过分析飞机结构件中组合曲面的类型，提出了一种基于曲面拟合的精度可控、刀轴摆动均匀且无干涉的飞机结构件组合曲面侧铣加工刀轨生成方法。该方法通过迭代拟合使曲面拟合精度可控，通过角度扇形离散控制刀轴摆角,
通过局部微调以减少干涉。经实例验证，该方法精度可控、效率高、刀轨生成算法稳定、加工质量高。基于该方法开发的系统已在某大型航空企业得到应用。

关键词: 数控加工, 飞机结构件, 组合曲面, 侧铣

Abstract:

This paper developed a new method to address the problem of automatic side milling tool path generation of compound surfaces in aircraft structural part.This method featured controllable precision,stable rotation of the axis and no interference.Specifically,the fitting accuracy become controllable by the iterative fitting algorithm,the tool axis rotated stably by the angle interpolation approach,and the interferences were reduced through local fine adjustments.The experimental and simulation results show that the surface fitting approach is accurate and efficient,and the tool path algorithm acquires high machining quality of
the parts in the simulation cuts.A system developed based on the approach herein is applied in an aviation manufacturing enterprise.

Key words: NC machining, aircraft structural part, compound surface, side milling

中图分类号:

TP391

傅浩杰, 廖文和, 李迎光. 飞机结构件组合曲面侧铣加工刀轨生成方法[J]. 中国机械工程, 2013, 24(10): 1306-1311.

FU Gao-Jie, LIAO Wen-He, LI Ying-Guang. An Approach to Tool Path Generation for Side Milling of Compound Surfaces in Aircraft Structural Part[J]. China Mechanical Engineering, 2013, 24(10): 1306-1311.

参考文献

[1]Liu X W.Five-axis Freeform Surface MillingUsing Piecewise Ruled Surface Approximation[J].Computer-Aided Design, 1995,27(12):887-894.
[2]Chu C H, Huang W N,Hsu Y Y.Machining Accu-racy Improvement in Five-axis Flank Milling ofRuled Surfaces [J].International Journal for Ma-chine Tools Manufacture,2008,48:914-921.
[3]Bedi S, Mann S,Menzel C.Flank Milling with Flatend Milling Cutters[J], Computer-Aided Design,2003,35(3):293-300.
[4]Menzel C, Bedi S, Mann S.Triple Tangent FlankMilling of Ruled Surfaces [J].Computer-AidedDesign,2004 ,36(3):289-296.
[5]Gong Hu,Cao Li Xin, Liu Jian.Improved Positio-ning of Cylindrical Cutter for Flank Milling RuledSurfaces[J].Computer _ Aided Design,2005,37(12):1205-1213.
[6]樊宏周[1],席光[1],王尚锦[1].任意扭曲叶轮五轴数控侧铣的算法研究[J].中国机械工程,2010(2):127-130.
[7]Chiou C J, Lee Y S.A Machining Potential FieldApproach to Tool Path Generation for Multi-axisSculptured Surface Machining[J].Computer-Ai-ded Design,2002,34(5):357-371.
[8]张利波,牟欣.组合曲面加工无干涉刀具路径的产生[J].华中理工大学学报,1996,24(9):15-17.
[9]Yafig J Z,Wang Q F, Huang Z D,et al. Tool Path Generation for Machining Compound Surfaces with Extended Cut Region Method [J]. International Journal for Advanced Manufacturing Technology, 2007,35 (1/2) : 179-185.
[10]Hwang J S, Chang T C. Tree--axis Machining of Compound Surfaces Using Flat and Filleted End- mills[J]. Computer-- Aided Design, 1998,30 (8) : 641-647.
[11]王海涛[1],赵东标[1],高素美[2].参数曲线的自适应实时前瞻插补算法[J].计算机集成制造系统,2010,16(2):385-389.
[12]柯映林[1],李奇敏[1].基于截面轮廓的NURBS曲面重建[J].中国机械工程,2005,16(12):1083-1087.
[13]朱心雄等著.自由曲线曲面造型技术[M],2000:391.
[14]施法中.计算机辅助几何设计与非均匀有理B样条[M].北京：北京航空航天大学出版社,1994.
[15]李水进周艳红周云飞等.基于B样条曲面的点云孔洞拟合填充.中国机械工程,2006,17(1):270-274.