板带轧机自动厚度控制模型的研究

中国机械工程 ›› 2008, Vol. 19 ›› Issue (1): 95-98.

板带轧机自动厚度控制模型的研究

张伟;王益群;孙孟辉

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-01-10 发布日期:2008-01-10

Research on Automatic Gauge Control Model of Strip Mills

Zhang Wei;Wang Yiqun;Sun Menghui

Received:1900-01-01 Revised:1900-01-01 Online:2008-01-10 Published:2008-01-10

摘要/Abstract

摘要：

对板带轧机自动厚度控制模型进行了理论分析，建立了三自由度轧机负载的液压压下系统的模型，将缸位移和内辊缝相区分，使其适用于不同的控制方式，进而对厚度计式控制模型、变形的厚度计式控制模型、动态设定控制模型进行了对比研究，指出轧机模数和轧件塑性系数分别对应于自动厚度控制系统的静态指标和动态指标，为控制过程中参数的选取提供理论依据。与传统的P-h图方法相比，该方法更深刻地反映了厚度控制过程的本质规律。

关键词: 液压压下系统, 缸位移, 内辊缝, 数字仿真, 机理模型

Abstract:

Theoretical analysis of strip mills AGC had been processed and a three-DOF mathematical model of hydraulic screw-down system had been built, which was specified cylinder displacement and inner gap and adapt to varied control way. Three typical AGC model, e.g. GM (Gauge Meter) control model， MGM (Modification Gauge Meter )control model，DS(Dynamic Setting )control model were researched contrastively, and pointed out two important parameters: rolling mills rigidity factor and strips plastic coefficient, which were corresponded to static criterion and dynamic criterion of a system individually. Theoretical factor was provided for selecting parameter in control process. Compared with traditional P-h chart, this method reflects essence of thickness control process profoundly.

Key words: hydraulic screw-down system, cylinder displacement, inner gap, digital simulation, mechanism model

中图分类号:

张伟, 王益群, 孙孟辉. 板带轧机自动厚度控制模型的研究[J]. 中国机械工程, 2008, 19(1): 95-98.

Zhang Wei, Wang Yiqun, Sun Menghui. Research on Automatic Gauge Control Model of Strip Mills[J]. China Mechanical Engineering, 2008, 19(1): 95-98.

[1]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[2]	王贡献, 王洋洋, 袁建明, 杨毅, 王东. 新型弧面摩擦阻尼器力学性能研究[J]. 中国机械工程, 2016, 27(11): 1429-1433.
[3]	杨红艳, 崔昭霞. 节流调速液压系统动态特性研究[J]. 中国机械工程, 2014, 25(20): 2724-2728,2739.
[4]	董敏;周彬. 基于未知输入观测器的板带轧机液压压下系统故障诊断[J]. 中国机械工程, 2013, 24(20): 2735-2740.
[5]	罗建强, 赵艳萍, 宋华明. 服务型制造环境下延迟策略实施机理及实证分析 [J]. 中国机械工程, 2010, 21(22): 2693-2698.
[6]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. 中国机械工程, 2010, 21(16): 1921-1926.