National Natural Science Foundation of China(No. 51105110);
Research Fund for the Doctoral Program of Higher Education of China(No. 20112302120075);
National High-tech R&D Program of China (863 Program) (No. 2011AA04A103)
Research on Micro EDM Pulse Generator with Fuzzy Control
Huang Ruining1,2;Liu Bing1;Lou Yunjiang1
1.Harbin Institute of Technology Shenzhen Graduate School,Shenzhen,Guangdong,518055
2.Key Laboratory of Mechanical Equipment Manufacturing and Control Technology Guangdong University of Technology,Ministry of Education,Guangzhou,510006
Online:2012-07-25
Published:2012-07-30
Supported by:
National Natural Science Foundation of China(No. 51105110);
Research Fund for the Doctoral Program of Higher Education of China(No. 20112302120075);
National High-tech R&D Program of China (863 Program) (No. 2011AA04A103)
HUANG Rui-Ning-1, 2, LIU Bing-1, LOU Yun-Jiang-1. Research on Micro EDM Pulse Generator with Fuzzy Control[J]. China Mechanical Engineering, 2012, 23(14): 1718-1722.
[1]薛重德.CPLD在电火花加工脉冲电源设计中的应用[J].电加工与模具,2003(1):20-22.
[2]Huang Ruining, Di Shichun, Chi Gunxin, et al. Development of Micro Wire Electrical Discharge Machining Platform and Its Applications [ J ]. Transactions of Nonferrous Metals Society of Chi- na, 2005,15:268-273.
[3]Kawakami T, Kunieda M. Study on Factors Deter- mining Limits of Minimum Machinable Size in Mi- croEDM[J]. Annals of the CIRP, 2005, 54(1): 167-170.
[4]狄士春[1],黄瑞宁[1],迟关心[1],赵万生[1].微细电火花线切割加工技术的研究[J].电加工与模具,2005(B04):40-43.
[5]韩福柱[1],陈丽[2],周晓光[2].微细电火花加工用晶体管脉冲电源的研究[J].中国机械工程,2006,17(20):2094-2097.
[6]霍孟友,张建华,艾兴.电火花放电加工间隙状态检测方法综述[J].电加工与模具,2003(3):17-20.
[7]罗元丰,赵万生,等.电火花加工放电状态的检测及神经模糊控制[J].高技术通讯,2000,10(11):72-74.
[8]Passino K M, Yurkovieh S. Fuzzy Control[M]. Menlo Park, California: Addison Wesley Longmna,Inc. , 2001.