基于无向加权图的协同生产网络脆弱性分析方法

中国机械工程 ›› 2012, Vol. 23 ›› Issue (10): 1216-1220.

基于无向加权图的协同生产网络脆弱性分析方法

张峰1;杨育1;贾建国1，2;王家天2

1.重庆大学机械传动国家重点实验室,重庆,400044
2.重庆化医控股(集团)公司,重庆,401121

出版日期:2012-05-25 发布日期:2012-05-30
基金资助:
国家自然科学基金资助项目(71071173)；重庆市科技攻关重点项目(2010GGB108)；高等学校博士学科点专项科研基金资助项目(20090191110004)；中央高校基本科研业务费专项资金资助项目(CDJZR10110012)
National Natural Science Foundation of China（No. 71071173）;

Key Technology R&D Program of Chonqing（No. 2010GGB108）;

Research Fund for the Doctoral Program of Higher Education of China（No. 20090191110004）;
Fundamental Research Funds for the Central Universities( No. CDJZR10110012 )

#br# Vulnerability Analysis of Collaborative Production Networks Based on Undirected Weighted Graph

Zhang Feng1;Yang Yu1;Jia Jianguo1,2;Wang Jiatian2

1.State Key Laboratory of Mechanical Transmissions,Chongqing University,Chongqing,400044
2.Chongqing Chemical & Pharmaceutical holding(Group) Company,Chongqing,401121

Online:2012-05-25 Published:2012-05-30
Supported by:

National Natural Science Foundation of China（No. 71071173）;

Key Technology R&D Program of Chonqing（No. 2010GGB108）;

Research Fund for the Doctoral Program of Higher Education of China

（No. 20090191110004）;
Fundamental Research Funds for the Central Universities( No. CDJZR10110012 )

摘要/Abstract

摘要：

为了分析企业故障对协同生产网络整体功能的影响,提出了基于脆弱性分析的研究方法;根据模糊集与复杂网络理论,将协同关系影响概率作为描述企业间业务联系的指标,构建了协同生产网络无向加权图模型;以最大可能路径作为协同生产网络效能函数,提出了兼顾企业功能和网络拓扑的脆弱性分析方法。实例分析结果表明,该方法可有效找到协同生产网络中存在的脆弱点。


关键词: 协同生产, 复杂网络, 脆弱性, 无向加权图

Abstract:

In order to analyze the influence of the failure of company on the function of whole collaborative production networks,a research method of vulnerability analysis was proposed.Based on fuzzy
set theory and complex networks theory,the probability of collaborative-related effects was taken as a index which characterized business relationship,and a undirected weighted graph model of collaborative production networks was built.And the network performance was calculated by the most probably path,and an analysis method was proposed,which considered both company operation and topology of
networks.The feasibility of the model and method was verified by the case of collaborative production networks.

Key words: collaborative production, complex network, vulnerability, undirected weighted graph

中图分类号:

N949

张峰1, 杨育1, 贾建国1, 2, 王家天2. 基于无向加权图的协同生产网络脆弱性分析方法[J]. 中国机械工程, 2012, 23(10): 1216-1220.

ZHANG Feng-1, YANG Yo-1, GU Jian-Guo-1, 2, WANG Jia-Tian-2. #br# Vulnerability Analysis of Collaborative Production Networks Based on Undirected Weighted Graph[J]. China Mechanical Engineering, 2012, 23(10): 1216-1220.

[1]	林文广, 赖荣燊, 肖人彬. [数据驱动的产品设计]基于复杂网络的专利数据驱动的产品创新设计[J]. 中国机械工程, 2020, 31(07): 842-852.
[2]	高贵兵, 岳文辉, 王峰. [设备健康管理]基于CPS方法与脆弱性评估的制造系统健康状态智能诊断[J]. 中国机械工程, 2019, 30(02): 212-219.
[3]	高贵兵;岳文辉;欧文初. 基于通用生成函数的混流制造系统脆弱性评价方法[J]. 中国机械工程, 2018, 29(17): 2087-2093,2099.
[4]	李华, 卢素伟, 杨挺. 基于脆弱性分析的复杂产品生产线工艺路线优化[J]. 中国机械工程, 2014, 25(23): 3168-3173.
[5]	徐玉国, 刘冠军, 邱静, 苏永定. 装备自主维修保障技术体系研究 [J]. 中国机械工程, 2010, 21(14): 1704-1708.
[6]	刘夫云;祁国宁;. 产品模块化程度评价方法研究 [J]. J4, 2008, 19(8): 0-885,.