大批量定制产品成本估算服务模型

中国机械工程 ›› 2012, Vol. 23 ›› Issue (6): 681-687.

大批量定制产品成本估算服务模型

计时鸣1;包志炎1,2;肖刚1;阮曙峰3

1.浙江工业大学,杭州,310032
2.浙江水利水电专科学校,杭州,310018
3.浙江众擎起重机械制造有限公司,绍兴,311800

出版日期:2012-03-26 发布日期:2012-04-13
基金资助:
国家自然科学基金资助项目（50705087);浙江省重大科技专项(2009C11164);浙江省教育厅科研项目(Y201120968)
National Natural Science Foundation of China（No. 50705087）;

Zhejiang Provincial Science and Technology Major Project ( No. 2009C11164);
Provincial Scientific Research Project of Ministry of Education of China（No. Y201120968）

Cost Estimation Service Model of Product in Mass Customization

Ji Shiming1;Bao Zhiyan1,2;Xiao Gang1;Ruan Shufeng3

1.Zhejiang University of Technology,Hangzhou,310032
2.Zhejiang Water Conservancy and Hydropower College,Hangzhou,310018
3.Zhejiang Zhongqing Lifting Machinery Co., Ltd.,Shaoxing,Zhejiang,311800

Online:2012-03-26 Published:2012-04-13
Supported by:

National Natural Science Foundation of China（No. 50705087）;

Zhejiang Provincial Science and Technology Major Project ( No. 2009C11164);
Provincial Scientific Research Project of Ministry of Education of China（No. Y201120968）

摘要/Abstract

摘要：

为了满足企业在产品生命周期内不同阶段对成本估算的应用需求,引入服务的概念,提出了大批量定制产品成本估算服务模型;建立了定制参数赋权、相似实例组提取、指数平滑预测等元服务;通过对元服务的编排组合,实现了成本粗略估算、成本快速估算、成本实时估算和成本精确计算等业务流程服务,分别适应客户初步询价、合同最终报价、产品成本控制和企业利润核算等应用需求;构造了合同报价辅助决策图供企业报价参考。最后以桥式起重机产品的成本估算为例,给出了详细的实现步骤,
说明方法的有效性。

关键词: 大批量定制产品, 成本估算, 快速报价, 产品报价, 服务

Abstract:

Aimed to satisfy the manufactories' needs of cost estimation at different periods in mass customization,a cost estimation service model of product in mass customization was proposed.Several atomic services including dynamic weights assignment algorithm,similar instance group matching,exponential smoothing algorithm were established,and composite services like coarse cost estimation,rapid cost estimation,
real-time cost estimation,accurate cost analysis were also put forward.These services were assembled piecemeal in the application systems,such as rapid quoting for customer,final order quoting,cost control,profit calculation.Assistant decision chart for final quoting of new customization products was also presented.The proposed methodology demonstrates the effectiveness in an instance of cost estimation of an overhead traveling crane product.

Key words: product in mass customization, cost estimation, rapid quoting, product quoting, service

中图分类号:

TP391
F224

计时鸣1, 包志炎1, 2, 肖刚1, 阮曙峰3. 大批量定制产品成本估算服务模型[J]. 中国机械工程, 2012, 23(6): 681-687.

JI Shi-Ming-1, BAO Zhi-Tan-1, 2, XIAO Gang-1, RUAN Shu-Feng-3. Cost Estimation Service Model of Product in Mass Customization[J]. China Mechanical Engineering, 2012, 23(6): 681-687.

参考文献

[1]Anderson D M.Agile Product Development for Mass Customization:How to Develop and Deliver Products for Mass Customization,Niche Markets,JIT,Build-to-order and Flexible Manufacturing[M].New York:McGraw Hill,1997:10-20.
[2]Chin K S,Wong T N.Developing a Knowledge-based Injection Module Cost Estimation System by Decision Tables[J].International Journal of Ad-vanced Manufacturing Technology,1996,11(5):353-364.
[3]Veeramani D.Intelligent Cost Estimation of Die Castings through Application of Group Technology[J].Manufacturing Research and Technology,2007,24(8):283-298.
[4]Roy R,Souchoroukov P,Griggs T.Function-based Cost Estimating[J].International Journal of Pro-duction Research,2008,46(10):2621-2650.
[5]苏少辉[1],纪杨建[1],祁国宁[1],郑克勤[2].大批量定制环境下面向订单设计产品的制造成本估算方法研究[J].计算机集成制造系统,2007,13(11):2236-2242.
[6]应保胜[1],易建钢[1],张华[1].基于因特网的桥式起重机快速报价系统[J].计算机集成制造系统,2004,10(7):867-870.
[7]唐敏[1],刘红平[1].大规模定制环境下基于GBOM的精确报价实现[J].重庆大学学报：自然科学版,2006,29(6):158-162.
[8]肖刚[1],张立彬[1],高飞[1].基于实例库自主聚类的自适应产品快速报价策略研究[J].中国机械工程,2010(1):80-84.
[9]An Sung-Hoon,Kim Gwang-Hee,Kang Kyung-In.A Case-based Reasoning Cost Estimating Model Using Experience by Analytic Hierarchy Process[J].Building and Environment,2007,42(7):2573-2579.
[10]王新 [1],谭建荣 [2],张树有 [2].大批量定制下产品报价快速响应技术研究[J].计算机辅助设计与图形学学报,2005,17(8):1717-1724.
[11]李果[1],单汨源[2],陈芝[2].基于事例推理和小波网络的大规模定制产品快速成本估算方法研究[J].中国机械工程,2007,18(9):1080-1084.
[12]姜少飞[1],鲁聪达[1],卢纯福[1],潘双夏[2].基于成本聚类的产品设计早期阶段成本估算模型[J].机械工程学报,2007,43(6):205-209.
[13]赵延明[1],刘德顺[1],徐小艳[1],张俊[1].面向零件公差设计的产品质量损失成本模型[J].中国机械工程,2011,22(11):1347-1351.
[14]黎锁平[1],刘坤会[1].平滑系数自适应的二次指数平滑模型及其应用[J].系统工程理论与实践,2004,24(2):95-99.