基于原案分析的工作模式对机械概念设计认知过程的影响

中国机械工程 ›› 2012, Vol. 23 ›› Issue (6): 646-650.

基于原案分析的工作模式对机械概念设计认知过程的影响

李发权1;熊世权2

1.河南理工大学,焦作,454000
2.重庆大学,重庆,400030

出版日期:2012-03-26 发布日期:2012-04-13
基金资助:
重庆市自然科学基金资助项目(CSTC2008BB2319); 河南省教育厅自然科学研究计划资助项目(2011B410001)
Natural Science Foundation of Chongqing（No. CSTC2008BB2319）;
Henan Provincial Natural Science Research Program of Ministry of Education of China（No. 2011B410001）

Experimental Study of Effects of Work Mode on Conceptual Mechanical Design Cognition Process through Protocol Analysis

Li Faquan1;Xiong Shiquan2

1.Henan Polytechnic University,Jiaozuo,Henan,454000
2.Chongqing University,Chongqing,400030

Online:2012-03-26 Published:2012-04-13
Supported by:

Natural Science Foundation of Chongqing（No. CSTC2008BB2319）;
Henan Provincial Natural Science Research Program of Ministry of Education of China（No. 2011B410001）

摘要/Abstract

摘要：

提出工作模式对设计时间、设计质量和设计结果创新性影响的3个理论假设。运用原案分析法,对14名机械专业研究生进行可调座椅概念设计认知实验,以验证这些假设,并采用Mann-Whitney非参数检验法进行统计分析。结果表明,在设计结果的创新性方面,不同工作模式下设计者的表现总体上没有显著差异;而在设计时间和设计质量方面,以交替模式工作的设计者的表现总体上优于以顺序模式工作的设计者的表现。因此,交替模式能够发挥两种媒介的优势,即传统媒介更适用于表征设计概念,而CAD媒介则更适用于分析和检验设计意图,从而提高设计效率。

关键词: 工作模式, 概念设计, 设计认知, 原案分析, 非参数检验

Abstract:

Three theoretical hypotheses were presented on the effects of work mode on design time, design quality, and novelty of design result. In order to test the hypotheses based on protocol analysis, a series of cognition experiments were conducted on adjustable seat conceptual design by 14 postgraduates in mechanical major. The results of Mann-Whitney nonparametric tests show: in terms of novelty of design result, there is generally no significant difference between the different work modes of the designers; but in terms of design time and design quality, the designers working in alternant mode generally perform better than those in sequential mode. It confirms that alternant mode can take the advantages of both media that traditional media is good for representing design concept and CAD media for analyzing and checking design intention, and thus alternant mode can enhance the efficiency of design.

Key words: work mode, conceptual design, design cognition, protocol analysis, nonparametric test

中图分类号:

TH122
B842

李发权1, 熊世权2. 基于原案分析的工作模式对机械概念设计认知过程的影响[J]. 中国机械工程, 2012, 23(6): 646-650.

LI Fa-Quan-1, XIONG Shi-Quan-2. Experimental Study of Effects of Work Mode on Conceptual Mechanical Design Cognition Process through Protocol Analysis[J]. China Mechanical Engineering, 2012, 23(6): 646-650.

参考文献

[1]Bilda Z,Demirkan H.An Insight on Designers’Sketching Activities in Traditional Versus DigitalMedia[J].Design Studies,2003,24(1):27-50.
[2]Stones C,Cassidy T.Comparing Synthesis Strate-gies of Novice Graphic Designers Using Digital andTraditional Design Tools[J].Design Studies,2007,28(1):59-72.
[3]Dorta T,Prez E,Lesage A.The Ideation Gap:Hy-brid Tools,Design Flow and Practice[J].DesignStudies,2008,29(2):121-141.
[4]Jack A I,Roepstorff A.Introspection and CognitiveBrain Mapping:from Stimulus-response to Script-report[J].Trends in Cognitive Sciences,2002,6(8):333-339.
[5]Gero J S,Tang H H.The Differences between Ret-rospective and Concurrent Protocols in Revealingthe Process-oriented Aspects of the Design Process[J].Design Studies,2001,22(3):283-295.
[6]Yang S C.Reconceptualizing Think-aloud Meth-odology:Refining the Encoding and CategorizingTechniques via Contextualized Perspectives[J].Computers in Human Behavior,2003,19(1):95-115.
[7]Fich R B.Using Protocol Analysis to Evaluate theUsability of a Commercial Web Site[J].Informa-tion&Management,2001,39(2):151-163.
[8]Chan C S.设计认知:设计中的认知科学[M].北京:中国建筑工业出版社,2008.
[9]徐文胜,刘继红.认识设计过程研究方法导论[J].机械科学与技术,1998,17(6):861-864.
[10]Salvendy G.Handbook of Industrial Engineering:Technology and Operations Management(Volume2)[M].3rd ed.New York:John Wiley&SonsInc.,2001.
[11]Madrazo L.Types and Instances:a Paradigm forTeaching Design with Computers[J].DesignStudies,1999,20(2):177-193.
[12]Marx J.A Proposal for Alternative Methods forTeaching Digital Design[J].Automation in Con-struction,2000,9(1):19-35.
[13]董奇，申继亮．心理与教育研究法[M]．杭州：浙江教育出版社，2005．166—185,361-368，391—398.
[14]Hakkarainen P S,Hakkarainen K.Compositionand Construction in Experts’and Novices’Wea-ving Design[J].Design Studies,2001,22(1):47-66.
[15]杨小平.统计分析方法与SPSS应用教程[M].北京:清华大学出版社,2008.