共享三维变换矩阵的模具工艺协同关键技术研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (1): 102-105.

共享三维变换矩阵的模具工艺协同关键技术研究

王成勇;钱凌云;陈从升;李亨;韩豫;刘全坤

合肥工业大学,合肥,230009

出版日期:2012-01-10 发布日期:2012-01-15
基金资助:
科技部科技型中小企业技术创新基金资助项目（08C26243401951）；合肥工业大学国家大学生创新性实验计划项目(101035913)；合肥工业大学大学生创新性实验计划项目（cxsy10249）

Research on Key Technologies of Mould Process Collaborative Design over Sharing 3D Transformation Matrix

Wang Chengyong;Qian Lingyun;Chen Congsheng;Li Heng;Han Yu;Liu Quankun

Hefei University of Technology, Hefei, 230009

Online:2012-01-10 Published:2012-01-15

摘要/Abstract

摘要：

分析了网络环境下模具协同工艺设计的关键技术,对比研究了三种工艺协同浏览方案及其开发技术,提出了共享三维变换矩阵的模具工艺协同浏览解决方案,讨论了共享变换矩阵的协同浏览原理,对模具网络协同工艺会商系统中异构CAD数据的轻量化中性交换模型选择、调用及控制方法进行了研究。设计了基于新方案的模具工艺协同设计系统功能框图,采用Java 3D技术开发了模具工艺协同原型实验系统。对三维变换矩阵、工艺白板、工艺命令流等封装、组播和提取过程进行了详细描述。该技术为多工艺专家协同完成大型复杂零部件成形模具工艺设计提供了技术支撑。



关键词:

协同设计, 命令流, 变换矩阵, 中性交换模型

Abstract:

Key technologies of the mould process collaborative design(MPCD) were analyzed under the network environment. Three kinds of process collaborative browse method and its development technologies were comparatively studied. The browse solution of sharing 3 dimensional transformation matrix was put forward. The principles of the mould model network browsing over sharing transformation matrix were discussed. A heterogeneous CAD data lightweight neutral exchange model in the collaborative process consultation system was suggested and the calling and controlling method was researched. The function diagram of the MPCD system based on the new solution was drawn and the prototype experimental system using Java 3D was developed. The three-dimensional transformation matrix, process whiteboard, process command stream multicast and information extraction were detailed. The theory and technology presented herein can provide key support for the collaborative design on the molding and forming process for complex parts.

Key words: collaborative design, command stream, transformation matrix, neutral exchange model

中图分类号:

TG706

王成勇, 钱凌云, 陈从升, 李亨, 韩豫, 刘全坤.

共享三维变换矩阵的模具工艺协同关键技术研究

[J]. 中国机械工程, 2012, 23(1): 102-105.

WANG Cheng-Yong, JIAN Ling-Yun, CHEN Cong-Sheng, LI Heng, HAN Shu, LIU Quan-Kun.

Research on Key Technologies of Mould Process Collaborative Design over Sharing 3D Transformation Matrix

[J]. China Mechanical Engineering, 2012, 23(1): 102-105.

参考文献

[1]范玉顺.网络化制造的内涵与关键技术问题[J].计算机集成制造系统,2003,9(7):576-582.
[2]王成勇[1],刘全坤[1],胡龙飞[1],胡成亮[1].基于Web3D／STEP的模具协同设计联盟数据共享研究[J].中国机械工程,2006,17(23):2477-2481.
[3]莫蓉[1],张军波[1],万能[1].基于B／S结构的网络协同造型技术研究[J].中国机械工程,2007,18(18):2201-2205.
[4]张晓冬[1],杨育[1],李国龙[1],李敏[1].网络化协同设计环境下4C集成服务模型与平台研究[J].中国机械工程,2006,17(10):1031-1035.
[5]You Chun- Fong, Tsou Pei - Jung, Yeh Shen- Chou. Collaborative Design for an Assembly Via the Internet[J]. International Journal of Advanced Manufacturing Technology, 2007, 31 (11): 1217- 1222.
[6]Germani M, Mandolini M, Mengoni M, et al. Collaborative Design System for Supporting Dynamic Virtual Enterprises[J]. IFIP Advances in Information and Communication Technology, 2010, 336: 577-584.
[7]陈亮[1],王伟[1].产品多学科协同设计中的一致性维护方法[J].中国机械工程,2010(12):1447-1452.
[8]杨煜俊[1],陈新度[1],陈新[1],万立[2].基于五维状态空间的产品建模方法研究[J].中国机械工程,2007,18(4):407-410.
[9]莫蓉[1],常智勇[1],张毅澜[1],张军波[1].协同设计中三维几何模型渐进式快速显示技术研究[J].计算机辅助设计与图形学学报,2004,16(10):1341-1345.
[10]周祖德,盛步云.数字化协同与网络交互设计[M].北京:科学出版社,2005.
[11]冯桂珍[1],池建斌[1],王晨[1],王大鸣[1].VRML模型创建工具中可视化交互操作的设计和实现[J].系统仿真学报,2006,18(2):387-390.
[12]周自强[1],沈连婠[1],赵玮[1],李木军[1],郑津津[1].面向用户的产品虚拟模型协同讨论环境的实现[J].工程图学学报,2005,26(3):5-11.
[13]王映辉[1].3D建模与编程技术[J].计算机应用研究,2004,21(1):37-43.