一种基于投影法的铺丝路径优化生成算法

中国机械工程 ›› 2011, Vol. 22 ›› Issue (16): 1993-1996.

一种基于投影法的铺丝路径优化生成算法

卢敏;周来水;王小平

南京航空航天大学，南京， 210016

出版日期:2011-08-25 发布日期:2011-08-30
基金资助:
国家自然科学基金资助项目(51075206)；南京航空航天大学青年科研创新基金资助项目(NS2010132)
National Natural Science Foundation of China（No. 51075206）

Optimization of Fiber Steering in Composite Laminates Using a Curve Projection Algorithm

Lu Min;Zhou Laishui;Wang Xiaoping

Nanjing University of Aeronautics and Astronautics, Nanjing, 210016

Online:2011-08-25 Published:2011-08-30
Supported by:

National Natural Science Foundation of China（No. 51075206）

摘要/Abstract

摘要：

提出了一种铺丝路径的优化生成算法，用以提高成形件的强度并减少复合材料的用量。首先根据构件的主应力分布选取系列关键位置点;其次沿特定方向平移这些点并拟合成曲线;然后将曲线投影至曲面得到铺丝路径;最后引入映射法生成距离曲线求解路径上的实时丝数信息。生成的路径轨迹满足:①精确通过原型值点并保持G1连续;②实现连续多层铺放。推导出了明确的路径计算公式，并以曲面实例验证了算法的简单快速性。

关键词:

复合材料, 路径优化, 主应力, 投影

Abstract:

Planning fiber placement paths according to the distribution of principal stress can reduce the amount of composite materials and enhance the strength of structure. First,a series of key points were picked out corresponding to the stress distribution;second,these points were moved along a particular direction and fitted to curves; then they were projected to surfaces and generated the fiber-placement paths; at last,a mapping method was used to create distance curve for the tow number determination. The path trajectories passed through all the target points and retained G1 continuity. Further more, they were generated from offset surfaces for multi-layer placement. Explicit formulae were derived to compute paths, and the proposed method is verified to be simple and rapid with surface examples.

Key words:

composite, path optimization, principal stress, projection

中图分类号:

TP391

卢敏, 周来水, 王小平.

一种基于投影法的铺丝路径优化生成算法

[J]. 中国机械工程, 2011, 22(16): 1993-1996.

LEI Min, ZHOU Lai-Shui, WANG Xiao-Beng.

Optimization of Fiber Steering in Composite Laminates Using a Curve Projection Algorithm

[J]. China Mechanical Engineering, 2011, 22(16): 1993-1996.

参考文献

[1]Shirinzadeh B, Alici G, Foong C W,et al. Fabrication Process of Open Surfaces by Robotic Fiber Placement[J]. Robotics and Computer--integrated Manufacturing, 2004, 20(1) : 17-28.
[2]Shirinzadeh B, Gary C, Denny O, et al. Trajectory Generation for Open- contoured Structures in Ro- botic Fiber Placement[J]. Robotics and Computer -- Integrated Manufacturing, 2007, 23 : 380-394.
[3]Kurt S,James M,Richard H. Approximate Geometric Methods in Application to the Modeling of Fiber Placed Composite Structures[J]. Journal of Computing and Information Science in Engineering, 2004,4(3):251-256.
[4]安鲁陵[1],周燚[1],周来水[1].复合材料纤维铺放路径规划与丝数求解[J].航空学报:745-750.
[5]邵忠喜[1],富宏亚[1],韩振宇[1],刘源[1].S形进气道纤维铺放轨迹规划和优化方法[J].宇航学报:855-861.
[6]Tosh M, Kelly D. On the Design, Manufacture and Testing of Trajectorial Fibre Steering for Carbon Fiber Composite Laminates[J]. Composites: Part A, 2000, 31 :1047-1060.
[7]Legrand X, Kelly D, Crosky A, et al. Optimisation of Fiber Steering in Composite Laminates Using a Genetic Algorithm[J]. Composite Structures, 2006, 75:524-531.
[8]Levend P, Stiha O, Umit C. Optimum Design of Composite Structures with Curved Fiber Courses EJ~. Composites Science and Technology, 2003, 63: 1071-1082.
[9]Crosky A, Kelly D, Li R, et al. Improvement of Bearing Strength of Laminated Composites [J]. Composite Structures, 2006, 76: 260-271.
[10]Setoodeh S,Abdalla M M,Gurdal Z,et al. Design of Variablestiffness Laminates Using Laminate Parameters[J]. Composites: Part B, 2006, 37: 301-309.
[11]Konrad G, Tamara H, Holger O. Application of the Tailored Fiber Placement(TFP) Process for a Local Reinforcement on an "open--hole" Tension Plate from Carbon/Epoxy Laminates[J]. Composite Science and Technology, 2003,63 : 81-88.
[12]蔺宏伟[1],王国瑾[2].光滑曲面上的G^1插值曲线[J].计算机辅助设计与图形学学报,2003,15(5):541-546.
[13]Wang X P, Zhou R R, Yu Z Y, et al. Interpolation and Blending on Parametric Surfaces [J]. Journal of Software,2004, 15(3): 451-460.
[14]邵冠军[1],游有鹏[1],熊慧[1].自由曲面构件的纤维铺放路径规划[J].南京航空航天大学学报,2005,37(B11):144-148.
[15]Wang Xiaoping, An Lulling, Zhang Liyan, et al. Uniform Coverage of Fibers over Open-contoured Freeform Structure Based on Are--length Parameter[J]. Chinese Journal of Aeronautics, 2008, 21 (6),571-577.