基于失效规则的机械装备腐蚀失效模式诊断

中国机械工程 ›› 2011, Vol. 22 ›› Issue (15): 1806-1809.

基于失效规则的机械装备腐蚀失效模式诊断

饶思贤1;王元1;万章1;宋光雄2;钟群鹏3

1.安徽工业大学,马鞍山,243002

2.华北电力大学,北京,102206

3.北京航空航天大学,北京,100083

出版日期:2011-08-10 发布日期:2011-08-24
基金资助:
国家高技术研究发展计划(863计划)资助项目(2009AA04480204)
National High-tech R&D Program of China (863 Program) （No. 2009AA04480204）

Corrosion Failure Mode Analysis of Mechanical Equipment Based on Failure Rules

Rao Sixian1;Wang Yuan1;Wan Zhang1;Song Guangxiong2;Zhong Qunpeng3

1.Anhui University of Technology,Ma’anshan,Anhui, 243001

2.North China Electric Power University,Beijing,102206

3.Beihang University,Beijing,100083

Online:2011-08-10 Published:2011-08-24
Supported by:
National High-tech R&D Program of China (863 Program) （No. 2009AA04480204）

摘要/Abstract

摘要：

根据对现有的机械装备腐蚀失效案例和现有失效知识的分析和总结,提取应力腐蚀和腐蚀疲劳两种模式的腐蚀失效特征并依据这些失效特征建立相应的腐蚀失效判断规则,根据这些失效规则运用COM Wizard、数据库技术、可靠性技术建立有效的腐蚀失效模式诊断专家系统。该专家系统依据输入的腐蚀失效特征识别具体案例的腐蚀失效模式,以综合可信度作为诊断结果的评价参数。

关键词:

腐蚀失效, 失效特征, 专家系统, 失效模式诊断

Abstract:

Corrosion failure features of stress corrosion cricking(SCC) and CF were generalized through analysis and summarization on the mechanical equipment corrosion failure cases and the existing failure information,COM Wizard,data base technique, reliability engineering were applied to construct effective corrosion failure diagnosis expert system.CF modes of real cases were analysized in the expert system through the corrosion failure feature inputs and the results were listed by general certainty factor as the evaluation parameter.

Key words:

corrosion failure(CF), failure feature, expert system, failure mode analysis

中图分类号:

TG172

饶思贤1, 王元1, 万章1, 宋光雄2, 钟群鹏3.

基于失效规则的机械装备腐蚀失效模式诊断

[J]. 中国机械工程, 2011, 22(15): 1806-1809.

RAO Sai-Xian-1, WANG Yuan-1, MO Zhang-1, SONG Guang-Xiong-2, ZHONG Qun-Feng-3.

Corrosion Failure Mode Analysis of Mechanical Equipment Based on Failure Rules

[J]. China Mechanical Engineering, 2011, 22(15): 1806-1809.

[1]	张旭刚, 敖秀奕, 张华, 江志刚, . [机械装备再制造]考虑失效特征的废旧零部件再制造成本预测模型研究[J]. 中国机械工程, 2018, 29(21): 2594-2599.
[2]	钱晓耀1, 钱家维2, 汪伟1, 孙长敬1, 徐新胜1. 止推片加工过程质量监测与诊断技术的研究 [J]. 中国机械工程, 2012, 23(1): 7-11.
[3]	吴飞青;马修水;关宏伟;刘庆;. 基于模糊专家控制的织机经纱恒张力控制研究[J]. J4, 2008, 19(4): 0-387.