基于链传动啮合特性的正时链参数设计

摘要/Abstract

摘要：

用几何法及虚位移原理分析了不同结构参数及不同初始相位角下链的传递特性，并分析了链轮中心距对从动轮角速度变化和链传动不均系数的影响规律，绘制了链传动初始相位几何特征参数对从动轮角速度和链传动不均系数影响的变化趋势。依此分析在其他参数确定的情况下，通过设计阻尼器导板压入量与曲率半径等参数来改变啮合特性以达到最小的角速度波动及变化参量，提出了高速链设计的辅助公式及验证约束方程，为发动机正时链系统设计提供思路和方法。



关键词:

链传动特性, 正时链, 减振导板, 链传动不均系数

Abstract:

The chain transmission characteristics in different initial phase angles of chain were analyzed from the perspective of geometry and the principles of virtual displacement.In addition,the effects of driven wheel angular velocity and angular inequality coefficient were analyzed with different central distances of two sprockets.

The influences of initial phase angle geometry characteristic parameters of the chain transmission on driven wheel angular velocity and angular inequality coefficient degree were analyzed and the fluctuation trend of driven wheel angular velocity was found out at the same time.It is found out when the other parameters are certain,how the damper of timing chain system guides the plate pressure degree and radius curvature in order to obtain the minimum angular velocity changes and angular inequality coefficient of driven wheel. Hence the assistant formula and the validation constraint equation were provided and the ideas, as well as, the methods for the design of engine timing chain system were put forward.

Key words: chain drive characteristics, timing chain, vibration damper strip, chain drive inequality coefficient

中图分类号:

TH11
TK4

李宝林, 唐力, 初晓亮, 范帅.

基于链传动啮合特性的正时链参数设计

[J]. 中国机械工程, 2011, 22(10): 1159-1164.

LI Bao-Lin, TANG Li, CHU Xiao-Liang, FAN Shuai.

Design of Timing Chain Parameters Based on Chain Transmission Meshing Characteristics

[J]. China Mechanical Engineering, 2011, 22(10): 1159-1164.

参考文献

[1]郑志峰王义行柴邦衡.链传动[M].北京：机械工业出版社,1984.
[2]李长春,张景春,赵洪华.链条速度波动的影响因素[J].济南大学学报：自然科学版,2002,16(2):168-170.
[3]Conwell J C,Johnson G E. Construction and Instru- mentation of a Machine to Measure Tension and Im- pact Force in Roller Chain Drives[J]. Mechanical and Machine Theory, 1996,31 (4) : 525-531.
[4]王树奇[1],崔向红[2].国产高速链滚子的失效分析[J].金属热处理,1999(2):39-40. 1
[5]Hellinger S M, Priebsch W. Prediction of Vibro-- acoustic Excitation Due to the Timing Chains of Re- ciprocating gngines[J]. Proceedings of the Institu- tion of Mechanical Engineer, Part K: Journal of Multi-- body Dynamics, 2003,217 (3): 225-240.
[6]Pedersen S L. Model of Contact between Rollers and Sprockets in Chain-- drive Systems[J]. Archive of Applied Meehanics,2005,74:489-508.
[7]哈尔滨工业大学理论力学教研室.理论力学[M].北京:高等教育出版社,2002.
[8]Weber C, Herrmann W, Stadtmann J. Experimental Investigation into the Dynamic Engine Timing Chain Behaviour[J]. SAE Special Publications. Engine Com- ponent Technology, 1998,1317(4 ) : 137-145.
[9]Lin Yeonqchinq, Hwang Shenq--Jiaw, McDonald, et al. Dynamic Analysis of an Automotive Timing Chain System[J]. American Society of Mechanical Engineers, Design Engineering Division (Publica- tion) DE, 1996,88:759-764.
[10]Wang Shukun, Meng Fanzhong. Multicycle Impact Property of Automotive Engine Timing Chain[J]. Journal of Harbin Institute of Technology, 2005, 37(4) :495-497.
[11]Conwell J C,Johnson G E. Experimental Invesli-- gation of Link Tension and Roller Sprocket Impact in Roller Chain Drives[J]. Mechanical and Ma- chine Theory, 1995,31(4) : 533-544.
[12]孟繁忠[1],李宝林[2],吕翔[3],吴联颖[3],王怀宇[3].汽车发动机正时链系统设计方法[J].哈尔滨工业大学学报,2009(5):121-124.
[13]李宝林[1,2],孟繁忠[1],李延春[1],唐力[2],穆松[2].汽车发动机正时链系统失效分析[J].润滑与密封,2006(2):52-54.
[14]李宝林[1,2],孟繁忠[2],曲绍鹏[2],唐力[3],刘新华[3].汽车发动机正时链试验中的纳米摩擦[J].润滑与密封,2006(9):90-93.
[15]王淑坤 [1],孟繁忠 [2],程亚兵 [2],王怀宇 [3].汽车发动机正时链的多冲特性[J].哈尔滨工业大学学报,2005,37(4):495-497.